IPAC2013 - List of Authors (Palmer, R.B.)

Paper	Title	Page
TUPFI057	Muon Accelerators for the Next Generation of High Energy Physics Experiments	1475
	M.A. Palmer, S. Brice, A.D. Bross, D.S. Denisov, E. Eichten, R.J. Lipton, D.V. Neuffer Fermilab, Batavia, USA C.M. Ankenbrandt Muons. Inc., USA S.A. Bogacz JLAB, Newport News, Virginia, USA J.-P. Delahaye SLAC, Menlo Park, California, USA P. Huber Virginia Polytechnic Institute and State University, Blacksburg, USA D.M. Kaplan, P. Snopok Illinois Institute of Technology, Chicago, Illinois, USA H.G. Kirk, R.B. Palmer BNL, Upton, Long Island, New York, USA R.D. Ryne LBNL, Berkeley, California, USA
	Funding: Work supported by the U.S. Department of Energy and the U.S. National Science Foundation Muon accelerator technology offers a unique and very promising avenue to a facility capable of producing high intensity muon beams for neutrino factory and multi-TeV lepton collider applications. The goal of the US Muon Accelerator Program is to provide an assessment, within the next 6 years, of the physics potential and technical feasibility of such a facility. This talk will describe the physics opportunities that are envisioned, along with the R&D efforts that are being undertaken to address key accelerator physics and technology questions.

TUPFI086	A Tapered Six Dimensional Cooling Lattice for a Muon Collider	1547
	D. Stratakis, R.C. Fernow, R.B. Palmer BNL, Upton, Long Island, New York, USA
	Designs for Neutrino Factories and Muon Colliders use ionization cooling to reduce the emittance of the muon beam prior to acceleration. Two lattices based on the original RFOFO ring design representing different configurations of the magnetic field are considered. One is with a flip magnetic field and one with a non-flip magnetic field configuration that is used to eliminate for possible space-charge effects. The details of the G4Beamline tracking studies of both channels are presented and compared to the independent ICOOL code.

TUPFI088	Space-charge Studies for Ionization Cooling Lattices	1553
	D. Stratakis, R.B. Palmer BNL, Upton, Long Island, New York, USA D.P. Grote LLNL, Livermore, California, USA
	Funding: This work is funded by US Dept. of Energy grant numbers DE AC02-98CH10886 Intense muon beams provide a promising solution to a variety of applications ranging from nanotechnology to nuclear detections systems and from medical sciences to high energy physics. Production of such intense beam requires the beam to be cooled and ionization cooling via particle matter interaction is considered one of the most practical methods. Here a theoretical and numerical study on space-charge effects on such ionization cooling channels is presented. We show that space-charge can strongly affect the design of muon cooling systems by limiting their minimum cooling rate. Space-charge compensation solutions are discussed and the minimum cooling emittance as a function of the beam charge and pulse width is identified.

WEPFI073	A Modular Cavity for Muon Ionization Cooling R&D	2860
	D.L. Bowring, A.J. DeMello, A.R. Lambert, D. Li, S.P. Virostek, M.S. Zisman LBNL, Berkeley, California, USA C. Adolphsen, L. Ge, A.A. Haase, K.H. Lee, Z. Li, D.W. Martin SLAC, Menlo Park, California, USA D.M. Kaplan Illinois Institute of Technology, Chicago, Illinois, USA T.H. Luo, D.J. Summers UMiss, University, Mississippi, USA A. Moretti, M.A. Palmer, R.J. Pasquinelli, Y. Torun Fermilab, Batavia, USA R.B. Palmer BNL, Upton, Long Island, New York, USA
	The Muon Accelerator Program (MAP) collaboration is developing an ionization cooling channel for muon beams. Ionization cooling channel designs call for the operation of high-gradient, normal-conducting RF cavities in multi-Tesla solenoidal magnetic fields. However, strong magnetic fields have been shown to limit the maximum achievable gradient in RF cavities. This gradient limit is characterized by RF breakdown and damage to the cavity surface. To study this issue, we have developed an experimental program based on a modular pillbox cavity operating at 805 MHz. The modular cavity design allows for the evaluation of different cavity materials - such as beryllium - which may ameliorate or circumvent RF breakdown triggers. Modular cavity components may furthermore be prepared with different surface treatments, such as high-temperature baking or chemical polishing. This poster presents the design and experimental status of the modular cavity, as well as future plans for the experimental program.

Paper

Title

Page

Muon Accelerators for the Next Generation of High Energy Physics Experiments

1475

M.A. Palmer, S. Brice, A.D. Bross, D.S. Denisov, E. Eichten, R.J. Lipton, D.V. Neuffer
Fermilab, Batavia, USA
C.M. Ankenbrandt
Muons. Inc., USA
S.A. Bogacz
JLAB, Newport News, Virginia, USA
J.-P. Delahaye
SLAC, Menlo Park, California, USA
P. Huber
Virginia Polytechnic Institute and State University, Blacksburg, USA
D.M. Kaplan, P. Snopok
Illinois Institute of Technology, Chicago, Illinois, USA
H.G. Kirk, R.B. Palmer
BNL, Upton, Long Island, New York, USA
R.D. Ryne
LBNL, Berkeley, California, USA

Funding: Work supported by the U.S. Department of Energy and the U.S. National Science Foundation
Muon accelerator technology offers a unique and very promising avenue to a facility capable of producing high intensity muon beams for neutrino factory and multi-TeV lepton collider applications. The goal of the US Muon Accelerator Program is to provide an assessment, within the next 6 years, of the physics potential and technical feasibility of such a facility. This talk will describe the physics opportunities that are envisioned, along with the R&D efforts that are being undertaken to address key accelerator physics and technology questions.

TUPFI086

A Tapered Six Dimensional Cooling Lattice for a Muon Collider

1547

D. Stratakis, R.C. Fernow, R.B. Palmer
BNL, Upton, Long Island, New York, USA

Designs for Neutrino Factories and Muon Colliders use ionization cooling to reduce the emittance of the muon beam prior to acceleration. Two lattices based on the original RFOFO ring design representing different configurations of the magnetic field are considered. One is with a flip magnetic field and one with a non-flip magnetic field configuration that is used to eliminate for possible space-charge effects. The details of the G4Beamline tracking studies of both channels are presented and compared to the independent ICOOL code.

TUPFI088

Space-charge Studies for Ionization Cooling Lattices

1553

D. Stratakis, R.B. Palmer
BNL, Upton, Long Island, New York, USA
D.P. Grote
LLNL, Livermore, California, USA

Funding: This work is funded by US Dept. of Energy grant numbers DE AC02-98CH10886
Intense muon beams provide a promising solution to a variety of applications ranging from nanotechnology to nuclear detections systems and from medical sciences to high energy physics. Production of such intense beam requires the beam to be cooled and ionization cooling via particle matter interaction is considered one of the most practical methods. Here a theoretical and numerical study on space-charge effects on such ionization cooling channels is presented. We show that space-charge can strongly affect the design of muon cooling systems by limiting their minimum cooling rate. Space-charge compensation solutions are discussed and the minimum cooling emittance as a function of the beam charge and pulse width is identified.

WEPFI073

A Modular Cavity for Muon Ionization Cooling R&D

2860

D.L. Bowring, A.J. DeMello, A.R. Lambert, D. Li, S.P. Virostek, M.S. Zisman
LBNL, Berkeley, California, USA
C. Adolphsen, L. Ge, A.A. Haase, K.H. Lee, Z. Li, D.W. Martin
SLAC, Menlo Park, California, USA
D.M. Kaplan
Illinois Institute of Technology, Chicago, Illinois, USA
T.H. Luo, D.J. Summers
UMiss, University, Mississippi, USA
A. Moretti, M.A. Palmer, R.J. Pasquinelli, Y. Torun
Fermilab, Batavia, USA
R.B. Palmer
BNL, Upton, Long Island, New York, USA

The Muon Accelerator Program (MAP) collaboration is developing an ionization cooling channel for muon beams. Ionization cooling channel designs call for the operation of high-gradient, normal-conducting RF cavities in multi-Tesla solenoidal magnetic fields. However, strong magnetic fields have been shown to limit the maximum achievable gradient in RF cavities. This gradient limit is characterized by RF breakdown and damage to the cavity surface. To study this issue, we have developed an experimental program based on a modular pillbox cavity operating at 805 MHz. The modular cavity design allows for the evaluation of different cavity materials - such as beryllium - which may ameliorate or circumvent RF breakdown triggers. Modular cavity components may furthermore be prepared with different surface treatments, such as high-temperature baking or chemical polishing. This poster presents the design and experimental status of the modular cavity, as well as future plans for the experimental program.