IPAC2013 - List of Authors (Lopes, R.)

Paper	Title	Page
WEPFI005	Simulations and RF Measurements of the Fundamental and Higher Order Modes of the ThomX 500 MHz Cavity	2711
	M. El Khaldi, I.V. Drebot, P. Lepercq, R. Marie, B. Mercier, T. Roulet, A. Variola, F. Wicek LAL, Orsay, France H.D. Dias, M.D. Diop, M.E. El Ajjouri, R. Lopes, A. Loulergue, P. Marchand, F. Ribeiro, R. Sreedharan SOLEIL, Gif-sur-Yvette, France
	The RF system of the ThomX* storage ring consists in a 500 MHz single cell copper cavity of the ELETTRA type, powered with a 50 kW CW solid state amplifier, and the associated Low Level RF feedback and control loops. The low operating energy of 50 – 70 MeV makes the impedances of the cavity higher order modes (HOMs) particularly critical for the beam stability. Their parasitic effects on the beam can be cured by HOM frequency shifting techniques, based on a fine temperature tuning and a dedicated plunger. A typical cavity temperature stability of ± 0.05°C within a range from 35 up to 80 °C can be achieved by a precise control of its water cooling temperature. On the other hand, the tuning of the cavity fundamental mode is achieved by changing its axial length by means of a mechanical tuner. In order to insure a fine control of the HOM frequencies, a good knowledge of their characteristics is mandatory. The main parameters of the fundamental and of the HOMs up to 4 GHz have been calculated using the HFSS and CST MWS codes. Preliminary measurements results have been obtained and show a good agreement with the simulations. * A.Variola, “The ThomX Project”, Proceedings of IPAC2011, San Sebastián, Spain

Paper

Title

Page

Simulations and RF Measurements of the Fundamental and Higher Order Modes of the ThomX 500 MHz Cavity

2711

M. El Khaldi, I.V. Drebot, P. Lepercq, R. Marie, B. Mercier, T. Roulet, A. Variola, F. Wicek
LAL, Orsay, France
H.D. Dias, M.D. Diop, M.E. El Ajjouri, R. Lopes, A. Loulergue, P. Marchand, F. Ribeiro, R. Sreedharan
SOLEIL, Gif-sur-Yvette, France

The RF system of the ThomX* storage ring consists in a 500 MHz single cell copper cavity of the ELETTRA type, powered with a 50 kW CW solid state amplifier, and the associated Low Level RF feedback and control loops. The low operating energy of 50 – 70 MeV makes the impedances of the cavity higher order modes (HOMs) particularly critical for the beam stability. Their parasitic effects on the beam can be cured by HOM frequency shifting techniques, based on a fine temperature tuning and a dedicated plunger. A typical cavity temperature stability of ± 0.05°C within a range from 35 up to 80 °C can be achieved by a precise control of its water cooling temperature. On the other hand, the tuning of the cavity fundamental mode is achieved by changing its axial length by means of a mechanical tuner. In order to insure a fine control of the HOM frequencies, a good knowledge of their characteristics is mandatory. The main parameters of the fundamental and of the HOMs up to 4 GHz have been calculated using the HFSS and CST MWS codes. Preliminary measurements results have been obtained and show a good agreement with the simulations.
* A.Variola, “The ThomX Project”, Proceedings of IPAC2011, San Sebastián, Spain