IPAC2013 - List of Authors (Jiang, B.)

Paper	Title	Page
WEPFI027	The Measurement of the Ferrite Rings for the Mass Production RF Cavity of CSNS RCS	2762
	H. Shi, W.L. Huang, B. Jiang, X. Li, W. Long, W.Y. Song, H. Sun, J.Y. Tang, C.L. Xie, C.L. Zhang, W. Zhang IHEP, Beijing, People's Republic of China
	The Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS) will install 8 ferrite-loaded coaxial resonant cavities. The construction and measurement of prototype cavity have been finished. Based on the existing experiences, the small inner diameter (ID) rings T500/250/25-4M2 (mm) have been adopted for the mass production RF cavity, and the test results have shown that such rings can bear more RF magnetic flux density and have lower power loss. The characteristics of 60 small ID rings have been measured with two-ring test system, and we figured out that the rings have good consistence and the shunt impedance of all rings is above 100 Ω.

Paper

Title

Page

The Measurement of the Ferrite Rings for the Mass Production RF Cavity of CSNS RCS

2762

H. Shi, W.L. Huang, B. Jiang, X. Li, W. Long, W.Y. Song, H. Sun, J.Y. Tang, C.L. Xie, C.L. Zhang, W. Zhang
IHEP, Beijing, People's Republic of China

The Rapid Cycling Synchrotron (RCS) of the China Spallation Neutron Source (CSNS) will install 8 ferrite-loaded coaxial resonant cavities. The construction and measurement of prototype cavity have been finished. Based on the existing experiences, the small inner diameter (ID) rings T500/250/25-4M2 (mm) have been adopted for the mass production RF cavity, and the test results have shown that such rings can bear more RF magnetic flux density and have lower power loss. The characteristics of 60 small ID rings have been measured with two-ring test system, and we figured out that the rings have good consistence and the shunt impedance of all rings is above 100 Ω.