IPAC2013 - List of Authors (Hsu, S.Y.)

Paper	Title	Page
MOPWA044	TLS Booster Measurement and Observation by New BPM Electronics	768
	P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo NSRRC, Hsinchu, Taiwan
	Taiwan Light Source (TLS) is a 1.5 GeV synchrotron based light source and its booster synchrotron was delivered in 1992. Due to the new project Taiwan Photon Source proceeded at the same site, some up-to-date device are available now before TPS civil construction complete and temporarily adapted for TLS booster to improve its operations. The major parameters of the TLS booster synchrotron are measured. It also provides a chance to experience for the TPS project booster diagnostic.

MOPWA045	The Pulsed Power Supply System for TPS Project	771
	C.-S. Fann, C.L. Chen, K.T. Hsu, S.Y. Hsu, A.P. Lee, K.-K. Lin, K.L. Tsai NSRRC, Hsinchu, Taiwan
	The pulsed power supply system for TPS project consists of three types of pulser for booster injection/extraction and storage ring injection. Categorizing by the delivered peak current, pulse shape base-width, they are for: 1) booster kicker: 500 A, square, 1 μs; 2) storage ring kicker: 5 kA, half-sine, 5 μs; 3) transfer line septum: 10 kA, half-sine, 300 μs; respectively. All together, there are 10 units constructed for the associated pulsed magnets. In this report, the test results of the pulsed power supplies will be summarized and the measured results of their performance are presented.

Paper

Title

Page

TLS Booster Measurement and Observation by New BPM Electronics

768

P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo
NSRRC, Hsinchu, Taiwan

Taiwan Light Source (TLS) is a 1.5 GeV synchrotron based light source and its booster synchrotron was delivered in 1992. Due to the new project Taiwan Photon Source proceeded at the same site, some up-to-date device are available now before TPS civil construction complete and temporarily adapted for TLS booster to improve its operations. The major parameters of the TLS booster synchrotron are measured. It also provides a chance to experience for the TPS project booster diagnostic.

MOPWA045

The Pulsed Power Supply System for TPS Project

771

C.-S. Fann, C.L. Chen, K.T. Hsu, S.Y. Hsu, A.P. Lee, K.-K. Lin, K.L. Tsai
NSRRC, Hsinchu, Taiwan

The pulsed power supply system for TPS project consists of three types of pulser for booster injection/extraction and storage ring injection. Categorizing by the delivered peak current, pulse shape base-width, they are for: 1) booster kicker: 500 A, square, 1 μs; 2) storage ring kicker: 5 kA, half-sine, 5 μs; 3) transfer line septum: 10 kA, half-sine, 300 μs; respectively. All together, there are 10 units constructed for the associated pulsed magnets. In this report, the test results of the pulsed power supplies will be summarized and the measured results of their performance are presented.