Author: Delayen, J.R.
Paper Title Page
WEPWA078 Compact Accelerator Design for a Compton Light Source 2292
  • T. Satogata, K.E. Deitrick, J.R. Delayen, B.R.P. Gamage, K.G. Hernández-Chahín, C.S. Hopper, G.A. Krafft, R.G. Olave
    ODU, Norfolk, Virginia, USA
  • K.G. Hernández-Chahín
    DCI-UG, León, Mexico
  • G.A. Krafft, T. Satogata
    JLAB, Newport News, Virginia, USA
  Funding: Partially authored by Jefferson Science Associates, LLC under U.S. DOE contract NO. DE-AC05-06OR23177.
A compact electron accelerator suitable for Compton source applications is in design at the Center for Accelerator Science at Old Dominion University and Jefferson Lab. The design includes a KE=1.55 MeV low-emittance, optimized superconducting electron gun; a 23.45 MeV linac with multi-spoke 4.2 K superconducting cavities; and transport that combines magnetic longitudinal bunch compressor and transverse final focus. We report on the initial designs of each element, including end to end simulations with ASTRA and elegant, and expected beam parameters.
WEPWO072 HOM Damping Coupler Design for the 400-MHz RF Dipole Compact Crab Cavity for the LHC HiLumi Upgrade 2468
  • Z. Li, L. Ge
    SLAC, Menlo Park, California, USA
  • S.U. De Silva, J.R. Delayen
    ODU, Norfolk, Virginia, USA
  Funding: Work partially supported by the US DOE through the US LHC Accelerator Research Program (LARP), and by US DOE under contract number DE-AC02-76SF00515.
Crab cavities are adapted as the baseline design for the LHC HiLumi upgrade to achieve head-on beam-beam collisions for further improvement in luminosity. A 400-MHz compact RF dipole crab cavity design was developed by a joint effort between Old Dominion University and SLAC under the support of US LARP program. This design has shown very favorable RF parameters and can fit into the available beamline spacing for either vertical and horizontal crabbing schemes. A niobium prototype cavity based on such a design has been manufactured for vertical test. In addition, there are stringent wakefield requirements that needed to be met for such a cavity in order to preserve the quality of the circulating beams. In this paper, we will discuss different damping schemes for such a compact design and present the HOM coupler designs to meet the damping requirements.
WEPWO079 Superconducting Single-spoke Cavities for High-velocity Applications 2480
  • C.S. Hopper, J.R. Delayen, R.G. Olave
    ODU, Norfolk, Virginia, USA
  Spoke cavities have been investigated for particle acceleration in the high-velocity regime. As part of these efforts, single-spoke cavities for particles traveling at the speed of light are being designed and built for proof-of-principle demonstration. We report here on the results of electromagnetic properties, design optimization, multipacting analysis, field non-linearities and higher order mode spectrum for a single-spoke cavity operating at 325 MHz.  
WEPWO080 Compact Superconducting RF-dipole Cavity Designs for Deflecting and Crabbing Applications 2483
  • S.U. De Silva, A. Castilla, J.R. Delayen
    ODU, Norfolk, Virginia, USA
  • A. Castilla
    DCI-UG, León, Mexico
  Over the years the superconducting parallel-bar design has evolved into an rf-dipole cavity with improved properties. The new rf-dipole design is considered for number of deflecting and crabbing applications. Some of those applications are the 499 MHz rf separator system for the Jefferson Lab 12 GeV upgrade, 400 MHz crabbing cavity system for the proposed LHC high luminosity upgrade, and 750 MHz crabbing cavity for the medium energy electron-ion collider in Jefferson Lab. In this paper we present the optimized rf design in terms of rf performance including rf properties, higher order mode properties, multipacting, multipole expansion for the above mentioned applications.