IPAC2013 - List of Authors (Chen, X.)

Paper	Title	Page
WEPWO025	Preliminary Design of 325 MHz Half-Wave Resonator	2369
	X.Y. Zhang, X. Chen, Z.Q. Li, Q. Ma, W.M. Pan, Y. Sun, G.W. Wang, Q.Y. Wang, B. Xu, G.Y. Zhao IHEP, Beijing, People's Republic of China
	Funding: This work is supported by the "Strategic Priority Research Program" of CAS. The Half-Wave Resonator (HWR) has been widely used in proton and heavy ion accelerators, for it has particular advantages of accelerating low energy charged particles. Preliminary design of a 325 MHz β=0.12 superconducting HWR cavity has been proposed at Institute of High Energy Physics (IHEP). The basic geometric parameters choices of the cavity are based upon theoretical model and numerical calculation, and then the RF performances are optimized by extensive electromagnetic simulations. In this paper, the detailed mechanical analysis, frequency control, and the considerations for fabrication of the 325 MHz HWR cavity are also presented.

THPWO041	The development of a high power input coupler for China ADS injector I RFQ	3857
	T.M. Huang, X. Chen, R. Guo, H.Y. Lin, Q. Ma, F. Meng, H.F. Ouyang, W.M. Pan, X.H. Peng, Z. Zhang, G.Y. Zhao IHEP, Beijing, People's Republic of China
	A 325 MHz RFQ is designed to accelerate a beam current of 15 mA in CW mode with injection energy of 35 keV and output energy of 3.2 MeV for China Accelerator Driven sub-critical System (ADS) injector I. Total RF power of 320 kW has to be delivered into the RFQ cavity. For reliable operation, four input couplers are adopted to share the driven power. A coaxial loop type input coupler is developed. The coupler features a Tristan type RF window, a doorknob to realize the transition from a half-height WR2300 waveguide to a coaxial line and a coaxial line with a coupling antenna loop. Two prototypes of the window and inner conductor assemblies have been fabricated and received high power test. The prototypes were tested up to 100 kW CW RF power in traveling wave mode. This paper will describe the design, fabrication and high power test of the coupler in details.

Paper

Title

Page

Preliminary Design of 325 MHz Half-Wave Resonator

2369

X.Y. Zhang, X. Chen, Z.Q. Li, Q. Ma, W.M. Pan, Y. Sun, G.W. Wang, Q.Y. Wang, B. Xu, G.Y. Zhao
IHEP, Beijing, People's Republic of China

Funding: This work is supported by the "Strategic Priority Research Program" of CAS.
The Half-Wave Resonator (HWR) has been widely used in proton and heavy ion accelerators, for it has particular advantages of accelerating low energy charged particles. Preliminary design of a 325 MHz β=0.12 superconducting HWR cavity has been proposed at Institute of High Energy Physics (IHEP). The basic geometric parameters choices of the cavity are based upon theoretical model and numerical calculation, and then the RF performances are optimized by extensive electromagnetic simulations. In this paper, the detailed mechanical analysis, frequency control, and the considerations for fabrication of the 325 MHz HWR cavity are also presented.

THPWO041

The development of a high power input coupler for China ADS injector I RFQ

3857

T.M. Huang, X. Chen, R. Guo, H.Y. Lin, Q. Ma, F. Meng, H.F. Ouyang, W.M. Pan, X.H. Peng, Z. Zhang, G.Y. Zhao
IHEP, Beijing, People's Republic of China

A 325 MHz RFQ is designed to accelerate a beam current of 15 mA in CW mode with injection energy of 35 keV and output energy of 3.2 MeV for China Accelerator Driven sub-critical System (ADS) injector I. Total RF power of 320 kW has to be delivered into the RFQ cavity. For reliable operation, four input couplers are adopted to share the driven power. A coaxial loop type input coupler is developed. The coupler features a Tristan type RF window, a doorknob to realize the transition from a half-height WR2300 waveguide to a coaxial line and a coaxial line with a coupling antenna loop. Two prototypes of the window and inner conductor assemblies have been fabricated and received high power test. The prototypes were tested up to 100 kW CW RF power in traveling wave mode. This paper will describe the design, fabrication and high power test of the coupler in details.