IPAC2013 - List of Authors (Chen, C.L.)

Paper	Title	Page
MOPWA045	The Pulsed Power Supply System for TPS Project	771
	C.-S. Fann, C.L. Chen, K.T. Hsu, S.Y. Hsu, A.P. Lee, K.-K. Lin, K.L. Tsai NSRRC, Hsinchu, Taiwan
	The pulsed power supply system for TPS project consists of three types of pulser for booster injection/extraction and storage ring injection. Categorizing by the delivered peak current, pulse shape base-width, they are for: 1) booster kicker: 500 A, square, 1 μs; 2) storage ring kicker: 5 kA, half-sine, 5 μs; 3) transfer line septum: 10 kA, half-sine, 300 μs; respectively. All together, there are 10 units constructed for the associated pulsed magnets. In this report, the test results of the pulsed power supplies will be summarized and the measured results of their performance are presented.

THPFI077	Construction Status of the TPS Vacuum Systems	3472
	G.-Y. Hsiung, C.K. Chan, C.H. Chang, C.-C. Chang, S.W. Chang, Y.P. Chang, C.L. Chen, J.-R. Chen, Z.W. Chen, C.M. Cheng, Y.T. Cheng, S-N. Hsu, H.P. Hsueh, C.S. Huang, Y.T. Huang, T.Y. Lee, L.H. Wu, Y.C. Yang NSRRC, Hsinchu, Taiwan J.-R. Chen National Tsing Hua University, Hsinchu, Taiwan
	The vacuum systems for the 3 GeV Taiwan Photon Source (TPS) have been constructed since 2010. Most of the vacuum components and equipments have been manufactured and delivered. For the electron storage ring (SR), all the 24 cells of 14 m aluminum vacuum systems have been welded and assembled. The vacuum baking for the cells in the laboratory was undergoing to achieve the ultrahigh vacuum pressure below 1×10^-8 Pa. The vacuum systems accommodated with the insertion devices in the long straight sections have been designed and under manufacturing. For the booster (BR), all the stainless steel chambers including the 0.7 mm elliptical chambers, BPM ducts, and the pumping chambers, have been manufactured. The two transport lines: LTB for Linac to BR and BTS for BR to SR were manufactured. Vacuum chambers for BTS adopt the similar chambers for BR but will be baked to ultrahigh vacuum for connecting with SR without injection window. The beam ducts for LTB will be made of aluminum alloys. The construction works for TPS vacuum systems will be completed before April of 2013 while the installation of the systems in the TPS tunnel will be started immediately.

Paper

Title

Page

The Pulsed Power Supply System for TPS Project

771

C.-S. Fann, C.L. Chen, K.T. Hsu, S.Y. Hsu, A.P. Lee, K.-K. Lin, K.L. Tsai
NSRRC, Hsinchu, Taiwan

The pulsed power supply system for TPS project consists of three types of pulser for booster injection/extraction and storage ring injection. Categorizing by the delivered peak current, pulse shape base-width, they are for: 1) booster kicker: 500 A, square, 1 μs; 2) storage ring kicker: 5 kA, half-sine, 5 μs; 3) transfer line septum: 10 kA, half-sine, 300 μs; respectively. All together, there are 10 units constructed for the associated pulsed magnets. In this report, the test results of the pulsed power supplies will be summarized and the measured results of their performance are presented.

THPFI077

Construction Status of the TPS Vacuum Systems

3472

G.-Y. Hsiung, C.K. Chan, C.H. Chang, C.-C. Chang, S.W. Chang, Y.P. Chang, C.L. Chen, J.-R. Chen, Z.W. Chen, C.M. Cheng, Y.T. Cheng, S-N. Hsu, H.P. Hsueh, C.S. Huang, Y.T. Huang, T.Y. Lee, L.H. Wu, Y.C. Yang
NSRRC, Hsinchu, Taiwan
J.-R. Chen
National Tsing Hua University, Hsinchu, Taiwan

The vacuum systems for the 3 GeV Taiwan Photon Source (TPS) have been constructed since 2010. Most of the vacuum components and equipments have been manufactured and delivered. For the electron storage ring (SR), all the 24 cells of 14 m aluminum vacuum systems have been welded and assembled. The vacuum baking for the cells in the laboratory was undergoing to achieve the ultrahigh vacuum pressure below 1×10^-8 Pa. The vacuum systems accommodated with the insertion devices in the long straight sections have been designed and under manufacturing. For the booster (BR), all the stainless steel chambers including the 0.7 mm elliptical chambers, BPM ducts, and the pumping chambers, have been manufactured. The two transport lines: LTB for Linac to BR and BTS for BR to SR were manufactured. Vacuum chambers for BTS adopt the similar chambers for BR but will be baked to ultrahigh vacuum for connecting with SR without injection window. The beam ducts for LTB will be made of aluminum alloys. The construction works for TPS vacuum systems will be completed before April of 2013 while the installation of the systems in the TPS tunnel will be started immediately.