Author: Chang, Y.P.
Paper Title Page
MOPEA059 The Optimization of Transverse Stripline Kicker 214
 
  • H.P. Hsueh, C.-C. Chang, Y.P. Chang, J.-R. Chen, Y.T. Cheng, G.-Y. Hsiung, Y.C. Yang
    NSRRC, Hsinchu, Taiwan
  • J.-R. Chen
    National Tsing Hua University, Hsinchu, Taiwan
 
  The construction of a new 3 GeV synchrotron facility, Taiwan Photon Source, is ongoing. It is required to install stripline kickers to suppress instability generated by mismatch between injection kickers or imperfect installation of vacuum components all around. First, the design philosophy will be described for transverse stripline kickers. HFSS electromagnetic simulation software is used to optimize all structure parameters like electrode dimensions, electrode distance from vacuum chambers etc. to make transverse stripline kicker working more efficiently and effectively. All simulation results will be presented in this paper and all structure dimension choices will be discussed and the final prototype structure dimensions will be selected from the discussion.  
 
THPFI077 Construction Status of the TPS Vacuum Systems 3472
 
  • G.-Y. Hsiung, C.K. Chan, C.H. Chang, C.-C. Chang, S.W. Chang, Y.P. Chang, C.L. Chen, J.-R. Chen, Z.W. Chen, C.M. Cheng, Y.T. Cheng, S-N. Hsu, H.P. Hsueh, C.S. Huang, Y.T. Huang, T.Y. Lee, L.H. Wu, Y.C. Yang
    NSRRC, Hsinchu, Taiwan
  • J.-R. Chen
    National Tsing Hua University, Hsinchu, Taiwan
 
  The vacuum systems for the 3 GeV Taiwan Photon Source (TPS) have been constructed since 2010. Most of the vacuum components and equipments have been manufactured and delivered. For the electron storage ring (SR), all the 24 cells of 14 m aluminum vacuum systems have been welded and assembled. The vacuum baking for the cells in the laboratory was undergoing to achieve the ultrahigh vacuum pressure below 1×10-8 Pa. The vacuum systems accommodated with the insertion devices in the long straight sections have been designed and under manufacturing. For the booster (BR), all the stainless steel chambers including the 0.7 mm elliptical chambers, BPM ducts, and the pumping chambers, have been manufactured. The two transport lines: LTB for Linac to BR and BTS for BR to SR were manufactured. Vacuum chambers for BTS adopt the similar chambers for BR but will be baked to ultrahigh vacuum for connecting with SR without injection window. The beam ducts for LTB will be made of aluminum alloys. The construction works for TPS vacuum systems will be completed before April of 2013 while the installation of the systems in the TPS tunnel will be started immediately.