IPAC2012 - List of Authors (Xing, Q.Z.)

Paper	Title	Page
THPPC014	Commissioning Status of the 3 MeV RFQ for the Compact Pulsed Hadron Source (CPHS) at Tsinghua University	3305
	Q.Z. Xing, Y.J. Bai, D.T. Bin, J.C. Cai, C. Cheng, L. Du, Q. Du, C. Jiang, Q. Qiang, D. Wang, X.W. Wang, Z.F. Xiong, S.Y. Yang, H.Y. Zhang, S.X. Zheng TUB, Beijing, People's Republic of China J.H. Billen TechSource, Santa Fe, New Mexico, USA W.Q. Guan, Y. He, J. Li NUCTECH, Beijing, People's Republic of China X.L. Guan Tsinghua University, Beijing, People's Republic of China J. Stovall CERN, Geneva, Switzerland L.M. Young AES, Medford, NY, USA
	Funding: Work supported by the “985 Project” of the Ministry of Education of China. We present, in this paper, the commissioning status of a Radio Frequency Quadrupole (RFQ) accelerator for the Compact Pulsed Hadron Source (CPHS) at Tsinghua University. In 2012 the 3-meter-long RFQ will deliver 3 MeV protons to the downstream High Energy Beam Transport (HEBT) with the peak current of 50 mA, pulse length of 0.5 ms and beam duty factor of 2.5%. Braze of the vanes was completed in September, 2011. The final field tuning of the whole cavity was completed in October, 2011. Initial commissioning will be underway at the beginning of 2012.

THPPC015	Design of a Four-vane 325 MHz RFQ Cold Model at Tsinghua University	3308
	L. Du, J.C. Cai, X. Guan, Q.Z. Xing TUB, Beijing, People's Republic of China
	Funding: Work supported by National Natural Science Foundation of China (Project 11175096). The design of a Radio Frequency Quadrupole (RFQ) accelerator cold model at Tsinghua University is presented in this paper. The 1-meter-long aluminium cold model is chosen to be the same as the low-energy part of the 3-meter-long RFQ for the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University. This cold model will be used mainly for the RFQ field study and education. It will work at the RF frequency of 325 MHz. All the simulations are finished by the SUPERFISH and MAFIA codes.

Paper

Title

Page

Commissioning Status of the 3 MeV RFQ for the Compact Pulsed Hadron Source (CPHS) at Tsinghua University

3305

Q.Z. Xing, Y.J. Bai, D.T. Bin, J.C. Cai, C. Cheng, L. Du, Q. Du, C. Jiang, Q. Qiang, D. Wang, X.W. Wang, Z.F. Xiong, S.Y. Yang, H.Y. Zhang, S.X. Zheng
TUB, Beijing, People's Republic of China
J.H. Billen
TechSource, Santa Fe, New Mexico, USA
W.Q. Guan, Y. He, J. Li
NUCTECH, Beijing, People's Republic of China
X.L. Guan
Tsinghua University, Beijing, People's Republic of China
J. Stovall
CERN, Geneva, Switzerland
L.M. Young
AES, Medford, NY, USA

Funding: Work supported by the “985 Project” of the Ministry of Education of China.
We present, in this paper, the commissioning status of a Radio Frequency Quadrupole (RFQ) accelerator for the Compact Pulsed Hadron Source (CPHS) at Tsinghua University. In 2012 the 3-meter-long RFQ will deliver 3 MeV protons to the downstream High Energy Beam Transport (HEBT) with the peak current of 50 mA, pulse length of 0.5 ms and beam duty factor of 2.5%. Braze of the vanes was completed in September, 2011. The final field tuning of the whole cavity was completed in October, 2011. Initial commissioning will be underway at the beginning of 2012.

THPPC015

Design of a Four-vane 325 MHz RFQ Cold Model at Tsinghua University

3308

L. Du, J.C. Cai, X. Guan, Q.Z. Xing
TUB, Beijing, People's Republic of China

Funding: Work supported by National Natural Science Foundation of China (Project 11175096).
The design of a Radio Frequency Quadrupole (RFQ) accelerator cold model at Tsinghua University is presented in this paper. The 1-meter-long aluminium cold model is chosen to be the same as the low-energy part of the 3-meter-long RFQ for the Compact Pulsed Hadron Source (CPHS) project at Tsinghua University. This cold model will be used mainly for the RFQ field study and education. It will work at the RF frequency of 325 MHz. All the simulations are finished by the SUPERFISH and MAFIA codes.