IPAC2012 - List of Authors (Wheelhouse, A.E.)

Paper	Title	Page
WEPPC031	Completed Assembly of the Daresbury International ERL Cryomodule and its Implementation on ALICE	2272
	P.A. McIntosh, M.A. Cordwell, P.A. Corlett, P. Davies, E. Frangleton, P. Goudket, K.J. Middleman, S.M. Pattalwar, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom S.A. Belomestnykh BNL, Upton, Long Island, New York, USA A. Büchner, F.G. Gabriel, P. Michel HZDR, Dresden, Germany J.N. Corlett, D. Li, S.M. Lidia LBNL, Berkeley, California, USA G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin, V. Veshcherevich CLASSE, Ithaca, New York, USA T.J. Jones, J. Strachan STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom R.E. Laxdal TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada D. Proch, J.K. Sekutowicz DESY, Hamburg, Germany T.I. Smith Stanford University, Stanford, California, USA
	The completion of an optimised SRF cryomodule for application on ERL accelerators has now culminated with the successful assembly of an integrated cryomodule, following an intensive 5 years of development evolution. The cryomodule, which incorporates 2 x 7-cell 1.3 GHz accelerating structures, 3 separate layers of magnetic shielding, fully adjustable & high power input couplers and fast piezo tuners, has been installed on the ALICE ERL facility at Daresbury Laboratory. It is intended that this will permit operational optimisation for maximised efficiency demonstration, through increased Qext adjustment whilst retaining both effective energy recovery and IR-FEL lasing. The collaborative design processes employed in completing this new cryomodule development are explained, along with the assembly and implementation procedures used to facilitate its successful installation on the ALICE ERL facility.

THPPC026	A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF	3335
	G. Burt Cockcroft Institute, Lancaster University, Lancaster, United Kingdom S.R. Buckley, P. Goudket, C. Hill, P.A. McIntosh, J.W. McKenzie, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	The Electron Beam Test Facility (EBTF) at Daresbury Laboratory will deliver low energy (5/6 MeV) short bunches (~40 fs) to a number of industrial experimental stations and for scientific research. In order to measure the longitudinal profile of the bunch an S-band transverse deflecting cavity will be inserted into the beamline. A transverse kick of around 5 MV is required hence a 9 cell design has been chosen. The design of the transverse deflecting cavity has been influence by the competing demands of high RF efficiency and minimising the unwanted transverse kick at the entrance and exit of the cavity which cause the electrons to be displaced while traversing the cavity. This has led to a shortened end cell structure design to minimise the kick applied at the entrance and exit to the cavity. In order to minimise the impact of the input coupler a dummy waveguide has been placed on the opposing side of the cavity to minimise the monopole component of the RF fields in the coupling cell. The coupler is located at the central cell of the cavity to avoid exciting the nearby modes. Tracking of the beam is performed in GPT including space charge, due to the low energy of the electrons.

THPPR044	A New Electron Beam Test Facility (EBTF) at Daresbury Laboratory for Industrial Accelerator System Development	4074
	P.A. McIntosh, D. Angal-Kalinin, S.R. Buckley, J.A. Clarke, A.R. Goulden, C. Hill, S.P. Jamison, J.K. Jones, A. Kalinin, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, T.T. Ng, B.J.A. Shepherd, R.J. Smith, S.L. Smith, N. Thompson, A.E. Wheelhouse STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom N. Bliss, G.P. Diakun, A. Gleeson, T.J. Jones, B.G. Martlew, A.J. Moss, L. Nicholson, M.D. Roper, C.J. White STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
	Recent UK government funding has facilitated the implementation of a unique accelerator test facility which can provide enabling infrastructures targeted for the development and testing of novel and compact accelerator technologies, specifically through partnership with industry and aimed at addressing applications for medicine, health, security, energy and industrial processing. The infrastructure provision on the Daresbury Science and Innovation Campus (DSIC) will permit research into areas of accelerator technologies which have the potential to revolutionise the cost, compactness and efficiency of such systems. The main element of the infrastructure will be a high performance and flexible electron beam injector facility, feeding customised state-of-the-art testing enclosures and associated support infrastructure. The facility operating parameters and implementation status will be described, along with primary areas of commercialised technology development opportunities.

Paper

Title

Page

Completed Assembly of the Daresbury International ERL Cryomodule and its Implementation on ALICE

2272

P.A. McIntosh, M.A. Cordwell, P.A. Corlett, P. Davies, E. Frangleton, P. Goudket, K.J. Middleman, S.M. Pattalwar, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
S.A. Belomestnykh
BNL, Upton, Long Island, New York, USA
A. Büchner, F.G. Gabriel, P. Michel
HZDR, Dresden, Germany
J.N. Corlett, D. Li, S.M. Lidia
LBNL, Berkeley, California, USA
G.H. Hoffstaetter, M. Liepe, H. Padamsee, P. Quigley, J. Sears, V.D. Shemelin, V. Veshcherevich
CLASSE, Ithaca, New York, USA
T.J. Jones, J. Strachan
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
R.E. Laxdal
TRIUMF, Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada
D. Proch, J.K. Sekutowicz
DESY, Hamburg, Germany
T.I. Smith
Stanford University, Stanford, California, USA

The completion of an optimised SRF cryomodule for application on ERL accelerators has now culminated with the successful assembly of an integrated cryomodule, following an intensive 5 years of development evolution. The cryomodule, which incorporates 2 x 7-cell 1.3 GHz accelerating structures, 3 separate layers of magnetic shielding, fully adjustable & high power input couplers and fast piezo tuners, has been installed on the ALICE ERL facility at Daresbury Laboratory. It is intended that this will permit operational optimisation for maximised efficiency demonstration, through increased Qext adjustment whilst retaining both effective energy recovery and IR-FEL lasing. The collaborative design processes employed in completing this new cryomodule development are explained, along with the assembly and implementation procedures used to facilitate its successful installation on the ALICE ERL facility.

THPPC026

A Transverse Deflecting Cavity for the Measurement of Short Low Energy Bunches at EBTF

3335

G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
S.R. Buckley, P. Goudket, C. Hill, P.A. McIntosh, J.W. McKenzie, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

The Electron Beam Test Facility (EBTF) at Daresbury Laboratory will deliver low energy (5/6 MeV) short bunches (~40 fs) to a number of industrial experimental stations and for scientific research. In order to measure the longitudinal profile of the bunch an S-band transverse deflecting cavity will be inserted into the beamline. A transverse kick of around 5 MV is required hence a 9 cell design has been chosen. The design of the transverse deflecting cavity has been influence by the competing demands of high RF efficiency and minimising the unwanted transverse kick at the entrance and exit of the cavity which cause the electrons to be displaced while traversing the cavity. This has led to a shortened end cell structure design to minimise the kick applied at the entrance and exit to the cavity. In order to minimise the impact of the input coupler a dummy waveguide has been placed on the opposing side of the cavity to minimise the monopole component of the RF fields in the coupling cell. The coupler is located at the central cell of the cavity to avoid exciting the nearby modes. Tracking of the beam is performed in GPT including space charge, due to the low energy of the electrons.

THPPR044

A New Electron Beam Test Facility (EBTF) at Daresbury Laboratory for Industrial Accelerator System Development

4074

P.A. McIntosh, D. Angal-Kalinin, S.R. Buckley, J.A. Clarke, A.R. Goulden, C. Hill, S.P. Jamison, J.K. Jones, A. Kalinin, J.W. McKenzie, K.J. Middleman, B.L. Militsyn, T.T. Ng, B.J.A. Shepherd, R.J. Smith, S.L. Smith, N. Thompson, A.E. Wheelhouse
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
N. Bliss, G.P. Diakun, A. Gleeson, T.J. Jones, B.G. Martlew, A.J. Moss, L. Nicholson, M.D. Roper, C.J. White
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom

Recent UK government funding has facilitated the implementation of a unique accelerator test facility which can provide enabling infrastructures targeted for the development and testing of novel and compact accelerator technologies, specifically through partnership with industry and aimed at addressing applications for medicine, health, security, energy and industrial processing. The infrastructure provision on the Daresbury Science and Innovation Campus (DSIC) will permit research into areas of accelerator technologies which have the potential to revolutionise the cost, compactness and efficiency of such systems. The main element of the infrastructure will be a high performance and flexible electron beam injector facility, feeding customised state-of-the-art testing enclosures and associated support infrastructure. The facility operating parameters and implementation status will be described, along with primary areas of commercialised technology development opportunities.