IPAC2012 - List of Authors (Toral, F.)

Paper	Title	Page
TUPPR016	Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings	1843
	C. Belver-Aguilar, A. Faus-Golfe IFIC, Valencia, Spain M.J. Barnes CERN, Geneva, Switzerland F. Toral CIEMAT, Madrid, Spain
	Funding: IDC-20101074 and FPA2010-21456-C02-01 The CLIC design relies on the presence of Pre-Damping Rings (PDR) and Damping Rings (DR) to achieve, through synchrotron radiation, the very low emittance needed to fulfill the luminosity requirements. Kicker systems are required to inject and extract the beam from the Pre-Damping and Damping Rings. In order to achieve low beam coupling impedance and reasonable broadband impedance matching to the electrical circuit, striplines have been chosen for the kicker elements. In this paper the final design for the DR kicker is presented, including an optimization of the geometric parameters to achieve the requirements for both characteristic impedance and field homogeneity. In addition, a sensitivity analysis of characteristic impedance and field homogeneity to geometric parameters is reported.

TUPPR018	Beam Impedance Study of the Stripline Kicker for the CLIC Damping Ring	1849
	C. Belver-Aguilar, A. Faus-Golfe IFIC, Valencia, Spain M.J. Barnes CERN, Geneva, Switzerland I. Podadera, F. Toral CIEMAT, Madrid, Spain
	Funding: FPA2010-21456-C02-01 CLIC Pre-Damping (PDR) and Damping Rings (DR) are required for reducing the emittance of the electron and positron beams before being accelerated in the main linac. Several stripline kicker systems are used to inject and extract the beam from the PDR and DR. Wakefields produced by the charged particles when passing through the aperture of the stripline kickers may become an important source of emittance growth; for this reason, simulations of longitudinal and transverse beam impedance in the frequency domain, and their equivalent in the time domain are needed. First analytical approaches, future simulations and tests planned are presented in this paper.

Paper

Title

Page

Final Cross Section Design of the Stripline Kicker for the CLIC Damping Rings

1843

C. Belver-Aguilar, A. Faus-Golfe
IFIC, Valencia, Spain
M.J. Barnes
CERN, Geneva, Switzerland
F. Toral
CIEMAT, Madrid, Spain

Funding: IDC-20101074 and FPA2010-21456-C02-01
The CLIC design relies on the presence of Pre-Damping Rings (PDR) and Damping Rings (DR) to achieve, through synchrotron radiation, the very low emittance needed to fulfill the luminosity requirements. Kicker systems are required to inject and extract the beam from the Pre-Damping and Damping Rings. In order to achieve low beam coupling impedance and reasonable broadband impedance matching to the electrical circuit, striplines have been chosen for the kicker elements. In this paper the final design for the DR kicker is presented, including an optimization of the geometric parameters to achieve the requirements for both characteristic impedance and field homogeneity. In addition, a sensitivity analysis of characteristic impedance and field homogeneity to geometric parameters is reported.

TUPPR018

Beam Impedance Study of the Stripline Kicker for the CLIC Damping Ring

1849

C. Belver-Aguilar, A. Faus-Golfe
IFIC, Valencia, Spain
M.J. Barnes
CERN, Geneva, Switzerland
I. Podadera, F. Toral
CIEMAT, Madrid, Spain

Funding: FPA2010-21456-C02-01
CLIC Pre-Damping (PDR) and Damping Rings (DR) are required for reducing the emittance of the electron and positron beams before being accelerated in the main linac. Several stripline kicker systems are used to inject and extract the beam from the PDR and DR. Wakefields produced by the charged particles when passing through the aperture of the stripline kickers may become an important source of emittance growth; for this reason, simulations of longitudinal and transverse beam impedance in the frequency domain, and their equivalent in the time domain are needed. First analytical approaches, future simulations and tests planned are presented in this paper.