IPAC2012 - List of Authors (Sato, Y.)

Paper

Title

Page

Simulation Calculation of Longitudinal Beam Distribution in J-PARC MR

2949

K. Hara, T. Koseki, C. Ohmori
KEK, Tokai, Ibaraki, Japan
Y. Sato
J-PARC, KEK & JAEA, Ibaraki-ken, Japan

The J-PARC accelerator complex consists of 3 accelerators, a linear accelerator, a rapid cycle synchrotron (RCS) and a Main Ring (MR) synchrotron. Simulation calculation of longitudinal beam distribution in J-PARC Main Ring has been performed. The effect that RF voltage pattern, space charge, and beam loading gave was examined.

TUOBA02

Beam Commissioning and Operation of New Linac Injector for RIKEN RI-beam Factory

1071

K. Yamada, S. Arai, M. Fujimaki, T. Fujinawa, H. Fujisawa, N. Fukunishi, Y. Higurashi, E. Ikezawa, H. Imao, O. Kamigaito, M. Kase, M. Komiyama, K. Kumagai, T. Maie, T. Nakagawa, J. Ohnishi, H. Okuno, N. Sakamoto, K. Suda, H. Watanabe, T. Watanabe, Y. Watanabe, H. Yamasawa
RIKEN Nishina Center, Wako, Japan
A. Goto
NIRS, Chiba-shi, Japan
Y. Sato
J-PARC, KEK & JAEA, Ibaraki-ken, Japan

A new linac injector called RILAC2* has successfully commissioned at the RIKEN RI beam factory (RIBF). The RILAC2 can accelerate very heavy ions with m/q of 7, such as 124Xe¹⁹⁺ and 238U³⁵⁺ from a 28 GHz superconducting ECR ion source**, up to an energy of 680 keV/nucleon in the cw mode. Ions are directory injected into the RIKEN Ring Cyclotron without charge stripping in order to increase the beam intensity, as well as performing independent RIBF experiments and super-heavy-element synthesis. The key features of RILAC2 are the powerful ECRIS, higher extraction voltage of the ECRIS compared to the voltage of the existing injector linac to reduce the space charge effect, improvement of the rf voltage and phase stability, improvement of the vacuum level to reduce the loss by charge exchange, and the compact equipments yet to be installed in the existing AVF cyclotron vault. The first beam acceleration was achieved on December 21, 2010. After the several beam acceleration tests in 2011, we started to operate the RILAC2 to supply beams for the RIBF experiments.
* O. Kamigaito et al., Proc. of PASJ3-LAM31, WP78, p. 502 (2006); K. Yamada et al., Proc. of IPAC'10, MOPD046, p.789 (2010).
** T. Nakagawa et al., Rev. Sci. Instrum. 79, 02A327 (2008).

Slides TUOBA02 [9.947 MB]

TUPPC019

Beam Dynamics Simulations of J-PARC Main Ring for Damage Recovery from the Tohoku Earthquake in Japan and Upgrade Plan of Fast Extraction Operation

1200

Y. Sato, K. Hara, S. Igarashi, T. Koseki, K. Ohmi, C. Ohmori
KEK, Ibaraki, Japan
H. Hotchi
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan

Magnets of Japan Proton Accelerator Research Complex (J-PARC) were shaken by the Tohoku Earthquake in Japan on March 11th, 2011. The alignment of J-PARC Main Ring (MR) received 20 mm displacement horizontally and 6 mm vertically. Beam dynamics simulations were performed to estimate the effect of the displacement on closed orbit distortions and beam loss in fast extraction (FX) operation of J-PARC MR. Based on the simulation results, we concluded that re-alignment of J-PARC MR was needed to achieve high-power beam. The re-alignment of MR was finished on October 28th, 2011. We also considered the effects of the earthquake on the upstream of MR to establish our upgrade plan, which was based on beam dynamics simulations optimizing collimator balance of injection beam transport (3-50BT) and MR, and RF patterns. J-PARC MR FX operation was resumed from December 2011.

TUPPP016

Recent Development of PF Ring and PF-AR

1641

Y. Tanimoto, T. Aoto, S. Asaoka, K. Endo, K. Haga, K. Harada, T. Honda, Y. Honda, M. Izawa, Y. Kobayashi, A. Mishina, T. Miyajima, H. Miyauchi, S. Nagahashi, N. Nakamura, T. Nogami, T. Obina, T. Ozaki, C.O. Pak, H. Sakai, S. Sakanaka, H. Sasaki, Y. Sato, K. Satoh, M. Shimada, K. Shinoe, T. Shioya, M. Tadano, T. Tahara, T. Takahashi, R. Takai, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, M. Yamamoto
KEK, Ibaraki, Japan
H. Takaki
ISSP/SRL, Chiba, Japan

After the earthquake of March 11, two light sources of KEK, PF ring and PF-AR, have recovered the regular operation from October, 2011. We installed tandem variably-polarized undulators at PF ring in 2009. Recently, the orbit switching system has been completed with sufficient feed-forward orbit compensation at 10-Hz. PF ring is usually operated at 450 mA with a top-up injection using the pulsed sextupole magnet instead of the conventional kicker magnets. The transverse and longitudinal instabilities are suppressed by a digital feedback system using the iGp signal processor. In the longitudinal direction, we observed unstable quadrupole mode oscillation which could not be controlled by the feedback system. We had applied the phase modulation of the main RF cavity to stabilize the quadrupole oscillation before. Old-type RF-shielded gate valves damaged by the earthquake were removed from the ring during the summer maintenance. In the operation after autumn, the quadrupole oscillation can be cured by dividing the bunch train of partial-filling. Without the phase modulation, the effective brightness of SR beam has been improved especially at beam lines of finite dispersion function.

THPPP080

Beam Halo Reduction in the J-PARC 3-GeV RCS

3918

H. Hotchi, H. Harada, P.K. Saha, Y. Shobuda, F. Tamura, K. Yamamoto, M. Yamamoto, M. Yoshimoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
Y. Irie, T. Koseki, Y. Sato, M.J. Shirakata
KEK, Ibaraki, Japan
K. Satou
J-PARC, KEK & JAEA, Ibaraki-ken, Japan

The J-PARC RCS (3-GeV rapid cycling synchrotron) has two functions as a proton driver to the MLF (Materials and life science facility) and an injector to the MR (50-GeV main ring synchrotron). One of important issues in the current RCS bam tuning is to suppress the beam halo formation, which is essential especially to reduce the beam loss at the MR. In this paper, we present beam study results on the formation mechanism and reduction of the beam halo in the RCS.

Paper	Title	Page
WEPPR007	Simulation Calculation of Longitudinal Beam Distribution in J-PARC MR	2949
	K. Hara, T. Koseki, C. Ohmori KEK, Tokai, Ibaraki, Japan Y. Sato J-PARC, KEK & JAEA, Ibaraki-ken, Japan
	The J-PARC accelerator complex consists of 3 accelerators, a linear accelerator, a rapid cycle synchrotron (RCS) and a Main Ring (MR) synchrotron. Simulation calculation of longitudinal beam distribution in J-PARC Main Ring has been performed. The effect that RF voltage pattern, space charge, and beam loading gave was examined.

TUOBA02	Beam Commissioning and Operation of New Linac Injector for RIKEN RI-beam Factory	1071
	K. Yamada, S. Arai, M. Fujimaki, T. Fujinawa, H. Fujisawa, N. Fukunishi, Y. Higurashi, E. Ikezawa, H. Imao, O. Kamigaito, M. Kase, M. Komiyama, K. Kumagai, T. Maie, T. Nakagawa, J. Ohnishi, H. Okuno, N. Sakamoto, K. Suda, H. Watanabe, T. Watanabe, Y. Watanabe, H. Yamasawa RIKEN Nishina Center, Wako, Japan A. Goto NIRS, Chiba-shi, Japan Y. Sato J-PARC, KEK & JAEA, Ibaraki-ken, Japan
	A new linac injector called RILAC2* has successfully commissioned at the RIKEN RI beam factory (RIBF). The RILAC2 can accelerate very heavy ions with m/q of 7, such as 124Xe¹⁹⁺ and 238U³⁵⁺ from a 28 GHz superconducting ECR ion source*, up to an energy of 680 keV/nucleon in the cw mode. Ions are directory injected into the RIKEN Ring Cyclotron without charge stripping in order to increase the beam intensity, as well as performing independent RIBF experiments and super-heavy-element synthesis. The key features of RILAC2 are the powerful ECRIS, higher extraction voltage of the ECRIS compared to the voltage of the existing injector linac to reduce the space charge effect, improvement of the rf voltage and phase stability, improvement of the vacuum level to reduce the loss by charge exchange, and the compact equipments yet to be installed in the existing AVF cyclotron vault. The first beam acceleration was achieved on December 21, 2010. After the several beam acceleration tests in 2011, we started to operate the RILAC2 to supply beams for the RIBF experiments. O. Kamigaito et al., Proc. of PASJ3-LAM31, WP78, p. 502 (2006); K. Yamada et al., Proc. of IPAC'10, MOPD046, p.789 (2010). ** T. Nakagawa et al., Rev. Sci. Instrum. 79, 02A327 (2008).
	Slides TUOBA02 [9.947 MB]

TUPPC019	Beam Dynamics Simulations of J-PARC Main Ring for Damage Recovery from the Tohoku Earthquake in Japan and Upgrade Plan of Fast Extraction Operation	1200
	Y. Sato, K. Hara, S. Igarashi, T. Koseki, K. Ohmi, C. Ohmori KEK, Ibaraki, Japan H. Hotchi JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
	Magnets of Japan Proton Accelerator Research Complex (J-PARC) were shaken by the Tohoku Earthquake in Japan on March 11th, 2011. The alignment of J-PARC Main Ring (MR) received 20 mm displacement horizontally and 6 mm vertically. Beam dynamics simulations were performed to estimate the effect of the displacement on closed orbit distortions and beam loss in fast extraction (FX) operation of J-PARC MR. Based on the simulation results, we concluded that re-alignment of J-PARC MR was needed to achieve high-power beam. The re-alignment of MR was finished on October 28th, 2011. We also considered the effects of the earthquake on the upstream of MR to establish our upgrade plan, which was based on beam dynamics simulations optimizing collimator balance of injection beam transport (3-50BT) and MR, and RF patterns. J-PARC MR FX operation was resumed from December 2011.

TUPPP016	Recent Development of PF Ring and PF-AR	1641
	Y. Tanimoto, T. Aoto, S. Asaoka, K. Endo, K. Haga, K. Harada, T. Honda, Y. Honda, M. Izawa, Y. Kobayashi, A. Mishina, T. Miyajima, H. Miyauchi, S. Nagahashi, N. Nakamura, T. Nogami, T. Obina, T. Ozaki, C.O. Pak, H. Sakai, S. Sakanaka, H. Sasaki, Y. Sato, K. Satoh, M. Shimada, K. Shinoe, T. Shioya, M. Tadano, T. Tahara, T. Takahashi, R. Takai, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, M. Yamamoto KEK, Ibaraki, Japan H. Takaki ISSP/SRL, Chiba, Japan
	After the earthquake of March 11, two light sources of KEK, PF ring and PF-AR, have recovered the regular operation from October, 2011. We installed tandem variably-polarized undulators at PF ring in 2009. Recently, the orbit switching system has been completed with sufficient feed-forward orbit compensation at 10-Hz. PF ring is usually operated at 450 mA with a top-up injection using the pulsed sextupole magnet instead of the conventional kicker magnets. The transverse and longitudinal instabilities are suppressed by a digital feedback system using the iGp signal processor. In the longitudinal direction, we observed unstable quadrupole mode oscillation which could not be controlled by the feedback system. We had applied the phase modulation of the main RF cavity to stabilize the quadrupole oscillation before. Old-type RF-shielded gate valves damaged by the earthquake were removed from the ring during the summer maintenance. In the operation after autumn, the quadrupole oscillation can be cured by dividing the bunch train of partial-filling. Without the phase modulation, the effective brightness of SR beam has been improved especially at beam lines of finite dispersion function.

THPPP080	Beam Halo Reduction in the J-PARC 3-GeV RCS	3918
	H. Hotchi, H. Harada, P.K. Saha, Y. Shobuda, F. Tamura, K. Yamamoto, M. Yamamoto, M. Yoshimoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan Y. Irie, T. Koseki, Y. Sato, M.J. Shirakata KEK, Ibaraki, Japan K. Satou J-PARC, KEK & JAEA, Ibaraki-ken, Japan
	The J-PARC RCS (3-GeV rapid cycling synchrotron) has two functions as a proton driver to the MLF (Materials and life science facility) and an injector to the MR (50-GeV main ring synchrotron). One of important issues in the current RCS bam tuning is to suppress the beam halo formation, which is essential especially to reduce the beam loss at the MR. In this paper, we present beam study results on the formation mechanism and reduction of the beam halo in the RCS.