IPAC2012 - List of Authors (Marusic, A.)

Paper	Title	Page
MOPPC022	Off-momentum Dynamic Aperture for Lattices in the RHIC Heavy Ion Runs	175
	Y. Luo, M. Bai, M. Blaskiewicz, W. Fischer, X. Gu, A. Marusic, T. Roser, S. Tepikian, S.Y. Zhang BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In this article we calculate and compare the off-momentum dynamic aperture for lattices with different phase advances per FODO cell in the RHIC heavy ion runs. A lattice with an increased phase advance was adopted in 2008-2011 to reduce transverse emittance growth rates from intra-beam scattering. However, during these runs, a large beam loss was observed with longitudinal RF re-bucketing which increased the momentum spread. With operational transverse stochastic cooling in the 2011 RHIC heavy ion run, the transverse intra-beam scattering emittance growth was eliminated, and the beam loss during stores was determined by the off-momentum aperture and burn-off from luminosity. We investigate the possibilities to increase the off-momentum dynamic aperture that would lead to an increase in the integrated luminosity.

MOPPC028	Coherent Beam-Beam Effects Observation and Mitigation at the RHIC Collider	193
	S.M. White, M. Bai, W. Fischer, Y. Luo, A. Marusic, M.G. Minty BNL, Upton, Long Island, New York, USA
	Funding: Work partially supported by Brookhaven Science Associates, LARP, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In polarized proton operation in RHIC coherent beam-beam modes are routinely observed with beam transfer function measurements in the vertical plane. With the existence of coherent modes a larger space is required in the tune diagram than without them and stable conditions can be compromised for operation with high intensity beams as foreseen for future luminosity upgrades. We report on experiments and simulations carried out to understand the existence of coherent modes in the vertical plane and their absence in the horizontal plane, and investigate possible mitigation strategies.

MOPPC029	Off-momentum Beat-beat Correction in the RHIC Proton Run	196
	Y. Luo, M. Bai, W. Fischer, A. Marusic, K. Mernick, S.M. White BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In this article we will present the measurement and correction of the off-momentum β^*-beat in the RHIC proton run. The beta-beat will be measured with the AC dipole and by shifting RF frequency. We will focus on the correction of the off-momentum beta-beat at the interaction points IP6 and IP8 with the arc chromatic sextupole families. The effects of the off-momentum beta-beat correction on the global chromaticities and dynamic aperture will be estimated through beam experiments and the numerical simulation.

MOPPC025	RHIC Polarized Proton Operation in Run 12	184
	V. Schoefer, L. A. Ahrens, A. Anders, E.C. Aschenauer, G. Atoian, M. Bai, J. Beebe-Wang, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, R. Connolly, T. D'Ottavio, A. Dion, K.A. Drees, W. Fischer, C.J. Gardner, J.W. Glenn, X. Gu, M. Harvey, T. Hayes, L.T. Hoff, H. Huang, R.L. Hulsart, A. Kirleis, J.S. Laster, C. Liu, Y. Luo, Y. Makdisi, G.J. Marr, A. Marusic, F. Méot, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, S. Nemesure, A. Poblaguev, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, T. Roser, W.B. Schmidke, F. Severino, D. Smirnov, K.S. Smith, D. Steski, S. Tepikian, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, G. Wang, M. Wilinski, K. Yip, A. Zaltsman, A. Zelenski, K. Zeno, S.Y. Zhang BNL, Upton, Long Island, New York, USA
	Successful RHIC operation with polarized protons requires meeting demanding and sometimes competing goals for maximizing both luminosity and beam polarization. In Run 12 we sought to fully integrate into operation the many systems that were newly commissioned in Run 11 as well as to enhance collider performance with incremental improvements throughout the acceleration cycle. For luminosity maximization special attention was paid to several possible source of emittance dilution along the injector chain, in particular to optical matching during transfer between accelerators. Possible sources of depolarization in the AGS and RHIC were also investigated including the effects of local coupling and low frequency (10 Hz) oscillations in the vertical equilibrium orbit during the RHIC ramp. The results of a fine storage energy scan made in an effort to improve store polarization lifetime are also reported in this note.

MOPPD070	A SVD-based Orbit Steering Algorithm for RHIC Injection	523
	C. Liu, A. Marusic, M.G. Minty, V. Ptitsyn BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The RHIC physics programs involve experiments with polarized proton and several species of ion beams. In the past, when switching between physics programs, first turn and circulating beam in RHIC was established manually by adjustments to the corrector dipoles for minimum beam loss. In this report, we introduce a new steering scheme based on an SVD algorithm which uses a single-pass orbit response matrix for first turn steering. The new scheme was implemented into the controls system and demonstrated successfully in Run-11. Establishing circulating beam using this automated approach has been shown to dramatically reduce the beam setup time.

TUPPC061	Commissioning of a beta∗ Knob for Dynamic IR Correction at RHIC	1314
	G. Robert-Demolaize, A. Marusic, S. Tepikian, S.M. White BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. In addition to the recent optics correction technique demonstrated at CERN and applied at RHIC, it is important to have a separate tool to control the value of the beta functions at the collision point (beta∗). This becomes even more relevant when trying to reach high level of integrated luminosity while dealing with emittance blow-up over the length of a store, or taking advantage of compensation processes like stochastic cooling. Algorithms have been developed to allow modifying independently the beta function in each plane for each beam without significant increase in beam losses. The following reviews the principle of such algorithms and their experimental implementation as a dynamic beta-squeeze procedure.

WEPPP083	Near Real-time Response Matrix Calibration for 10-Hz GOFB	2903
	C. Liu, R.L. Hulsart, A. Marusic, K. Mernick, R.J. Michnoff, M.G. Minty BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The 10-Hz global orbit feedback, for damping the trajectory perturbation (~10 Hz) due to the vibrations of the triplets, is operational for injection and store in RHIC. The operation of the system has been performed using transfer functions between the beam position monitors and correctors obtained from the online optics model and a correction algorithm based on singular value decomposition (SVD). Calibration of the transfer functions by measuring the beam position oscillations while modulating the dedicated correctors has been carried out. The feedback results with model matrix and measured matrix will be compared.

WEPPP084	Weighted SVD Algorithm for Close-Orbit Correction and 10 Hz Feedback in RHIC	2906
	C. Liu, R.L. Hulsart, A. Marusic, R.J. Michnoff, M.G. Minty, V. Ptitsyn BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Measurements of the beam position along an accelerator are typically treated equally using standard SVD-based orbit correction algorithms so distributing the residual errors, modulo the local beta function, equally at the measurement locations. However, sometimes a more stable orbit at select locations is desirable. In this paper, we introduce an algorithm for weighting the beam position measurements to achieve a more stable local orbit. The results of its application to close-orbit correction and 10-Hz orbit feedback will be shown and analyzed.

THPPP026	Experimental Effects of Orbit on Polarization Loss in RHIC	3788
	V.H. Ranjbar Tech-X, Boulder, Colorado, USA M. Bai, H. Huang, A. Marusic, M.G. Minty, V. Ptitsyn BNL, Upton, Long Island, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. We are performing several experiments during the RHIC ramp to better understand the impact of orbit errors on the polarization at our current working point. These will be conducted by exciting specified orbit harmonics during the final two large intrinsic resonance crossing in RHIC during the 250 GeV polarized proton ramp. The resultant polarization response will then be measured.

Paper

Title

Page

Off-momentum Dynamic Aperture for Lattices in the RHIC Heavy Ion Runs

175

Y. Luo, M. Bai, M. Blaskiewicz, W. Fischer, X. Gu, A. Marusic, T. Roser, S. Tepikian, S.Y. Zhang
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In this article we calculate and compare the off-momentum dynamic aperture for lattices with different phase advances per FODO cell in the RHIC heavy ion runs. A lattice with an increased phase advance was adopted in 2008-2011 to reduce transverse emittance growth rates from intra-beam scattering. However, during these runs, a large beam loss was observed with longitudinal RF re-bucketing which increased the momentum spread. With operational transverse stochastic cooling in the 2011 RHIC heavy ion run, the transverse intra-beam scattering emittance growth was eliminated, and the beam loss during stores was determined by the off-momentum aperture and burn-off from luminosity. We investigate the possibilities to increase the off-momentum dynamic aperture that would lead to an increase in the integrated luminosity.

MOPPC028

Coherent Beam-Beam Effects Observation and Mitigation at the RHIC Collider

193

S.M. White, M. Bai, W. Fischer, Y. Luo, A. Marusic, M.G. Minty
BNL, Upton, Long Island, New York, USA

Funding: Work partially supported by Brookhaven Science Associates, LARP, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In polarized proton operation in RHIC coherent beam-beam modes are routinely observed with beam transfer function measurements in the vertical plane. With the existence of coherent modes a larger space is required in the tune diagram than without them and stable conditions can be compromised for operation with high intensity beams as foreseen for future luminosity upgrades. We report on experiments and simulations carried out to understand the existence of coherent modes in the vertical plane and their absence in the horizontal plane, and investigate possible mitigation strategies.

MOPPC029

Off-momentum Beat-beat Correction in the RHIC Proton Run

196

Y. Luo, M. Bai, W. Fischer, A. Marusic, K. Mernick, S.M. White
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In this article we will present the measurement and correction of the off-momentum β^*-beat in the RHIC proton run. The beta-beat will be measured with the AC dipole and by shifting RF frequency. We will focus on the correction of the off-momentum beta-beat at the interaction points IP6 and IP8 with the arc chromatic sextupole families. The effects of the off-momentum beta-beat correction on the global chromaticities and dynamic aperture will be estimated through beam experiments and the numerical simulation.

MOPPC025

RHIC Polarized Proton Operation in Run 12

184

V. Schoefer, L. A. Ahrens, A. Anders, E.C. Aschenauer, G. Atoian, M. Bai, J. Beebe-Wang, M. Blaskiewicz, J.M. Brennan, K.A. Brown, D. Bruno, R. Connolly, T. D'Ottavio, A. Dion, K.A. Drees, W. Fischer, C.J. Gardner, J.W. Glenn, X. Gu, M. Harvey, T. Hayes, L.T. Hoff, H. Huang, R.L. Hulsart, A. Kirleis, J.S. Laster, C. Liu, Y. Luo, Y. Makdisi, G.J. Marr, A. Marusic, F. Méot, K. Mernick, R.J. Michnoff, M.G. Minty, C. Montag, J. Morris, S. Nemesure, A. Poblaguev, V. Ptitsyn, V.H. Ranjbar, G. Robert-Demolaize, T. Roser, W.B. Schmidke, F. Severino, D. Smirnov, K.S. Smith, D. Steski, S. Tepikian, D. Trbojevic, N. Tsoupas, J.E. Tuozzolo, G. Wang, M. Wilinski, K. Yip, A. Zaltsman, A. Zelenski, K. Zeno, S.Y. Zhang
BNL, Upton, Long Island, New York, USA

Successful RHIC operation with polarized protons requires meeting demanding and sometimes competing goals for maximizing both luminosity and beam polarization. In Run 12 we sought to fully integrate into operation the many systems that were newly commissioned in Run 11 as well as to enhance collider performance with incremental improvements throughout the acceleration cycle. For luminosity maximization special attention was paid to several possible source of emittance dilution along the injector chain, in particular to optical matching during transfer between accelerators. Possible sources of depolarization in the AGS and RHIC were also investigated including the effects of local coupling and low frequency (10 Hz) oscillations in the vertical equilibrium orbit during the RHIC ramp. The results of a fine storage energy scan made in an effort to improve store polarization lifetime are also reported in this note.

MOPPD070

A SVD-based Orbit Steering Algorithm for RHIC Injection

523

C. Liu, A. Marusic, M.G. Minty, V. Ptitsyn
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The RHIC physics programs involve experiments with polarized proton and several species of ion beams. In the past, when switching between physics programs, first turn and circulating beam in RHIC was established manually by adjustments to the corrector dipoles for minimum beam loss. In this report, we introduce a new steering scheme based on an SVD algorithm which uses a single-pass orbit response matrix for first turn steering. The new scheme was implemented into the controls system and demonstrated successfully in Run-11. Establishing circulating beam using this automated approach has been shown to dramatically reduce the beam setup time.

TUPPC061

Commissioning of a beta∗ Knob for Dynamic IR Correction at RHIC

1314

G. Robert-Demolaize, A. Marusic, S. Tepikian, S.M. White
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
In addition to the recent optics correction technique demonstrated at CERN and applied at RHIC, it is important to have a separate tool to control the value of the beta functions at the collision point (beta∗). This becomes even more relevant when trying to reach high level of integrated luminosity while dealing with emittance blow-up over the length of a store, or taking advantage of compensation processes like stochastic cooling. Algorithms have been developed to allow modifying independently the beta function in each plane for each beam without significant increase in beam losses. The following reviews the principle of such algorithms and their experimental implementation as a dynamic beta-squeeze procedure.

WEPPP083

Near Real-time Response Matrix Calibration for 10-Hz GOFB

2903

C. Liu, R.L. Hulsart, A. Marusic, K. Mernick, R.J. Michnoff, M.G. Minty
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The 10-Hz global orbit feedback, for damping the trajectory perturbation (~10 Hz) due to the vibrations of the triplets, is operational for injection and store in RHIC. The operation of the system has been performed using transfer functions between the beam position monitors and correctors obtained from the online optics model and a correction algorithm based on singular value decomposition (SVD). Calibration of the transfer functions by measuring the beam position oscillations while modulating the dedicated correctors has been carried out. The feedback results with model matrix and measured matrix will be compared.

WEPPP084

Weighted SVD Algorithm for Close-Orbit Correction and 10 Hz Feedback in RHIC

2906

C. Liu, R.L. Hulsart, A. Marusic, R.J. Michnoff, M.G. Minty, V. Ptitsyn
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
Measurements of the beam position along an accelerator are typically treated equally using standard SVD-based orbit correction algorithms so distributing the residual errors, modulo the local beta function, equally at the measurement locations. However, sometimes a more stable orbit at select locations is desirable. In this paper, we introduce an algorithm for weighting the beam position measurements to achieve a more stable local orbit. The results of its application to close-orbit correction and 10-Hz orbit feedback will be shown and analyzed.

THPPP026

Experimental Effects of Orbit on Polarization Loss in RHIC

3788

V.H. Ranjbar
Tech-X, Boulder, Colorado, USA
M. Bai, H. Huang, A. Marusic, M.G. Minty, V. Ptitsyn
BNL, Upton, Long Island, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
We are performing several experiments during the RHIC ramp to better understand the impact of orbit errors on the polarization at our current working point. These will be conducted by exciting specified orbit harmonics during the final two large intrinsic resonance crossing in RHIC during the 250 GeV polarized proton ramp. The resultant polarization response will then be measured.