IPAC2012 - List of Authors (Corsini, R.)

Paper

Title

Page

Experimental Verification of the CLIC Two-beam Scheme, Status and Outlook

1101

R. Corsini
CERN, Geneva, Switzerland

The feasibility of the CLIC novel scheme of two-beam acceleration was extensively tested in the CTF3 facility over the last few years. In particular, efficient full beam loading acceleration, isochronous ring operation, beam recombination by transverse RF deflectors have been fully proven. 12 GHz RF power production by high-current drive beam is now part of CTF3 routine operation, and two-beam acceleration up to 150 MV/m has been achieved. Drive beam deceleration tests were carried out as well. In this paper we summarize the main results obtained, including the more recent ones. We also outline and discuss the future experimental program, both in CTF3 and in other beam facilities, as well as the path to a possible facility needed in the initial stage of the CLIC project, CLIC0.

Slides TUOBC01 [9.921 MB]

TUPPC086

Conceptual Design of the CLIC damping rings

1368

Y. Papaphilippou, F. Antoniou, M.J. Barnes, S. Calatroni, P. Chiggiato, R. Corsini, A. Grudiev, J. Holma, T. Lefèvre, M. Martini, M. Modena, N. Mounet, A. Perin, Y. Renier, G. Rumolo, S. Russenschuck, H. Schmickler, D. Schoerling, D. Schulte, M. Taborelli, G. Vandoni, F. Zimmermann
CERN, Geneva, Switzerland
C. Belver-Aguilar, A. Faus-Golfe
IFIC, Valencia, Spain
A. Bernhard
KIT, Karlsruhe, Germany
M.J. Boland
ASCo, Clayton, Victoria, Australia
A.V. Bragin, E.B. Levichev, S.V. Sinyatkin, P. Vobly, K. Zolotarev
BINP SB RAS, Novosibirsk, Russia
M. Korostelev
Cockcroft Institute, Warrington, Cheshire, United Kingdom
E. Koukovini
EPFL, Lausanne, Switzerland
M.A. Palmer
CLASSE, Ithaca, New York, USA
M.T.F. Pivi, S.R. Smith
SLAC, Menlo Park, California, USA
R.P. Rassool, K.P. Wootton
The University of Melbourne, Melbourne, Australia
L. Rinolfi
JUAS, Archamps, France
A. Vivoli
Fermilab, Batavia, USA

The CLIC damping rings are designed to produce unprecedentedly low-emittances of 500 nm and 5 nm normalized at 2.86 GeV, in all beam dimensions with high bunch charge, necessary for the performance of the collider. The large beam brightness triggers a number of beam dynamics and technical challenges. Ring parameters such as energy, circumference, lattice, momentum compaction, bending and super-conducting wiggler fields are carefully chosen in order to provide the target emittances under the influence of intrabeam scattering but also reduce the impact of collective effects such as space-charge and coherent synchrotron radiation. Mitigation techniques for two stream instabilities have been identified and tested. The low vertical emittance is achieved by modern orbit and coupling correction techniques. Design considerations and plans for technical system, such as damping wigglers, transfer systems, vacuum, RF cavities, instrumentation and feedback are finally reviewed.

TUPPR019

High Power Operation with Beam of a CLIC PETS Equipped with ON/OFF Mechanism

1852

I. Syratchev, R. Corsini, A. Dubrovskiy, P. Skowroński
CERN, Geneva, Switzerland
R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden

One of the feasibility issues of the CLIC two-beam scheme is the possibility of rapidly switching off the RF power production in individual Power Extraction and Transfer Structures (PETS) in case of breakdowns, either in the PETS or one of the main beam accelerating structures. The proposed solution is to use a variable external reflector connected to the PETS. When activated, this scheme allows us to manipulate gradually the RF power transfer to the accelerating structure and to reduce the RF power production in the PETS itself by a factor of 4. Recently the first operation of the Two Beam Test Stand (TBTS) PETS equipped with an on-off mechanism has been performed in CTF3. In this paper we will present the results of the PETS operation when powered by the drive beam up to high peak power levels (>100 MW) and compare them to expectations.

Paper	Title	Page
TUOBC01	Experimental Verification of the CLIC Two-beam Scheme, Status and Outlook	1101
	R. Corsini CERN, Geneva, Switzerland
	The feasibility of the CLIC novel scheme of two-beam acceleration was extensively tested in the CTF3 facility over the last few years. In particular, efficient full beam loading acceleration, isochronous ring operation, beam recombination by transverse RF deflectors have been fully proven. 12 GHz RF power production by high-current drive beam is now part of CTF3 routine operation, and two-beam acceleration up to 150 MV/m has been achieved. Drive beam deceleration tests were carried out as well. In this paper we summarize the main results obtained, including the more recent ones. We also outline and discuss the future experimental program, both in CTF3 and in other beam facilities, as well as the path to a possible facility needed in the initial stage of the CLIC project, CLIC0.
	Slides TUOBC01 [9.921 MB]

TUPPC086	Conceptual Design of the CLIC damping rings	1368
	Y. Papaphilippou, F. Antoniou, M.J. Barnes, S. Calatroni, P. Chiggiato, R. Corsini, A. Grudiev, J. Holma, T. Lefèvre, M. Martini, M. Modena, N. Mounet, A. Perin, Y. Renier, G. Rumolo, S. Russenschuck, H. Schmickler, D. Schoerling, D. Schulte, M. Taborelli, G. Vandoni, F. Zimmermann CERN, Geneva, Switzerland C. Belver-Aguilar, A. Faus-Golfe IFIC, Valencia, Spain A. Bernhard KIT, Karlsruhe, Germany M.J. Boland ASCo, Clayton, Victoria, Australia A.V. Bragin, E.B. Levichev, S.V. Sinyatkin, P. Vobly, K. Zolotarev BINP SB RAS, Novosibirsk, Russia M. Korostelev Cockcroft Institute, Warrington, Cheshire, United Kingdom E. Koukovini EPFL, Lausanne, Switzerland M.A. Palmer CLASSE, Ithaca, New York, USA M.T.F. Pivi, S.R. Smith SLAC, Menlo Park, California, USA R.P. Rassool, K.P. Wootton The University of Melbourne, Melbourne, Australia L. Rinolfi JUAS, Archamps, France A. Vivoli Fermilab, Batavia, USA
	The CLIC damping rings are designed to produce unprecedentedly low-emittances of 500 nm and 5 nm normalized at 2.86 GeV, in all beam dimensions with high bunch charge, necessary for the performance of the collider. The large beam brightness triggers a number of beam dynamics and technical challenges. Ring parameters such as energy, circumference, lattice, momentum compaction, bending and super-conducting wiggler fields are carefully chosen in order to provide the target emittances under the influence of intrabeam scattering but also reduce the impact of collective effects such as space-charge and coherent synchrotron radiation. Mitigation techniques for two stream instabilities have been identified and tested. The low vertical emittance is achieved by modern orbit and coupling correction techniques. Design considerations and plans for technical system, such as damping wigglers, transfer systems, vacuum, RF cavities, instrumentation and feedback are finally reviewed.

TUPPR019	High Power Operation with Beam of a CLIC PETS Equipped with ON/OFF Mechanism	1852
	I. Syratchev, R. Corsini, A. Dubrovskiy, P. Skowroński CERN, Geneva, Switzerland R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden
	One of the feasibility issues of the CLIC two-beam scheme is the possibility of rapidly switching off the RF power production in individual Power Extraction and Transfer Structures (PETS) in case of breakdowns, either in the PETS or one of the main beam accelerating structures. The proposed solution is to use a variable external reflector connected to the PETS. When activated, this scheme allows us to manipulate gradually the RF power transfer to the accelerating structure and to reduce the RF power production in the PETS itself by a factor of 4. Recently the first operation of the Two Beam Test Stand (TBTS) PETS equipped with an on-off mechanism has been performed in CTF3. In this paper we will present the results of the PETS operation when powered by the drive beam up to high peak power levels (>100 MW) and compare them to expectations.