IBIC2015 - Table of Session: MOCLA (Time Resolved Diagnostics and Synchronization)

Paper

Title

Page

Microbunching Instability in Relativistic Electron Bunches: Direct Observations of the Microstructures Using Ultrafast YBCO Detectors

17

E. Roussel, S. Bielawski, C. Evain, C. Szwaj
PhLAM/CERLA, Villeneuve d'Ascq, France
M. Adachi, M. Katoh, S.I. Kimura, T. Konomi
UVSOR, Okazaki, Japan
M. Hofherr, K.S. Ilin, J. Raasch, A. Scheuring, M. Siegel, P. Thoma, S. Wuensch
KIT, Karlsruhe, Germany
M. Hosaka, Y. Takashima, N. Yamamoto
Nagoya University, Nagoya, Japan
H. Zen
Kyoto University, Kyoto, Japan

Relativistic electron bunches circulating in accelerators are subjected to a dynamical instability leading to microstructures at millimeter to centimeter scale. Although this is a well-known fact, direct experimental observations of the structures, or the field that they emit, remained up to now an open problem. Here, we report the direct, shot-by-shot, time-resolved recording of the shapes (including envelope and carrier) of the pulses of coherent synchrotron radiation that are emitted, and that are a 'signature' of the electron bunch microstructure. The experiments are performed on the UVSOR-III storage ring, using electrical field sensitive YBa2Cu3O7−x thin-film ultrafast detectors. The observed patterns are subjected to permanent drifts, that can be explained from a reasoning in phase space, using macroparticle simulations.
http://dx.doi.org/10.1103/PhysRevLett.113.094801

Slides MOCLA01 [37.745 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOCLA02

Design of a Compact L-band Transverse Deflecting Cavity with Arbitrary Polarisations for the SACLA Injector

22

H. Maesaka, T. Asaka, T. Ohshima, Y. Otake, H. Tanaka
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
S. Matsubara
JASRI/SPring-8, Hyogo, Japan

We are planning to install a transverse deflecting cavity (TCAV) in the injector of the X-ray free electron laser (XFEL) facility, SACLA [*], in order to measure longitudinal bunch profiles after a velocity bunching process. This is because the longitudinal bunch profile in the injector is critically important for reproducing the XFEL performance [**]. The TCAV will be installed at the end of the velocity bunching section, where the bunch length ranges from 10 ps to several 100 ps, the kinetic energy of the beam is approximately 1 MeV, and the transverse beam motion is rotated by solenoid lenses. Considering these conditions, we designed a compact L-band (1428 MHz) TM110-mode pillbox-shape TCAV (~300 mm-diameter and ~100 mm-long) with two input ports intersecting at a right angle. One of the advantages of this TCAV is that the polarisation of a deflecting rf field can be freely chosen, e.g. linear or circular, by changing the amplitude and phase at each rf port. We can select the linear polarisation for linear streaking with an arbitrary direction, or the circular one for axially symmetric deflection to reduce transverse mixing due to a solenoid B-field, depending on the situation.
[*] T. Ishikawa, et al., Nature Photonics 6, 540-544 (2012).
[**] T. Asaka, et al., Proceedings of LINAC2012, 486-488, TUPB006, (2012).

Slides MOCLA02 [11.996 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOCLA03

Fully Intensity and Timing Jitter Compensated Ultra-Fast Experiments at Accelerator-Driven Photonsources at High Repetition Rates

S. Kovalev, M. Gensch, B.W. Green
HZDR, Dresden, Germany
A.S. Fisher
SLAC, Menlo Park, California, USA
T. Golz, N. Stojanovic
DESY, Hamburg, Germany
T. Kampfrath
FHI, Berlin, Germany

Funding: European Union through project EUCALL
Timing jitter and power instabilities are crucial parameters which greatly reduce the applicability of accelerator driven light sources for time-resolved experiments. In this contribution we present a technique that allows achieving few 10 fs time-resolution in experiments operating at cw repetition rates of up to 100 kHz by employing high repetition rate data acquisition. The method employs a fs-level arrival time monitor based on electro-optic sampling* ** of residual pulses from a coherent diffraction radiator and a fast THz detector allowing for pulse to pulse detection of arrival time and pump intensity. The monitor can operate at high repetition rates cw (presently up to a few 100 kHz) and low electron bunch charges (sub pC). The prototype device has been tested at the quasi CW SRF accelerator (ELBE) by performing an ultra-fast THz driven magnetization dynamics experiment***. Our method has high potential to provide few fs level timing on next generation large scale X-ray photon sources based on high repetition rate electron accelerators such as LCLSII. A demonstrator aiming at operation up to 4.7 MHz is under development for the European X-FEL.
* Z. Jiang, X. C. Zhang, IEEE Journal of Quantum Electronics, 36, 1214, 2000
** I. Wilke et al., Phys. Rev. Lett., 88, 124801, 2002.
*** S. Kovalev et. al., under review (2015).

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper	Title	Page
MOCLA01	Microbunching Instability in Relativistic Electron Bunches: Direct Observations of the Microstructures Using Ultrafast YBCO Detectors	17
	E. Roussel, S. Bielawski, C. Evain, C. Szwaj PhLAM/CERLA, Villeneuve d'Ascq, France M. Adachi, M. Katoh, S.I. Kimura, T. Konomi UVSOR, Okazaki, Japan M. Hofherr, K.S. Ilin, J. Raasch, A. Scheuring, M. Siegel, P. Thoma, S. Wuensch KIT, Karlsruhe, Germany M. Hosaka, Y. Takashima, N. Yamamoto Nagoya University, Nagoya, Japan H. Zen Kyoto University, Kyoto, Japan
	Relativistic electron bunches circulating in accelerators are subjected to a dynamical instability leading to microstructures at millimeter to centimeter scale. Although this is a well-known fact, direct experimental observations of the structures, or the field that they emit, remained up to now an open problem. Here, we report the direct, shot-by-shot, time-resolved recording of the shapes (including envelope and carrier) of the pulses of coherent synchrotron radiation that are emitted, and that are a 'signature' of the electron bunch microstructure. The experiments are performed on the UVSOR-III storage ring, using electrical field sensitive YBa2Cu3O7−x thin-film ultrafast detectors. The observed patterns are subjected to permanent drifts, that can be explained from a reasoning in phase space, using macroparticle simulations. http://dx.doi.org/10.1103/PhysRevLett.113.094801
	Slides MOCLA01 [37.745 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOCLA02	Design of a Compact L-band Transverse Deflecting Cavity with Arbitrary Polarisations for the SACLA Injector	22
	H. Maesaka, T. Asaka, T. Ohshima, Y. Otake, H. Tanaka RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan S. Matsubara JASRI/SPring-8, Hyogo, Japan
	We are planning to install a transverse deflecting cavity (TCAV) in the injector of the X-ray free electron laser (XFEL) facility, SACLA [], in order to measure longitudinal bunch profiles after a velocity bunching process. This is because the longitudinal bunch profile in the injector is critically important for reproducing the XFEL performance []. The TCAV will be installed at the end of the velocity bunching section, where the bunch length ranges from 10 ps to several 100 ps, the kinetic energy of the beam is approximately 1 MeV, and the transverse beam motion is rotated by solenoid lenses. Considering these conditions, we designed a compact L-band (1428 MHz) TM110-mode pillbox-shape TCAV (~300 mm-diameter and ~100 mm-long) with two input ports intersecting at a right angle. One of the advantages of this TCAV is that the polarisation of a deflecting rf field can be freely chosen, e.g. linear or circular, by changing the amplitude and phase at each rf port. We can select the linear polarisation for linear streaking with an arbitrary direction, or the circular one for axially symmetric deflection to reduce transverse mixing due to a solenoid B-field, depending on the situation. [] T. Ishikawa, et al., Nature Photonics 6, 540-544 (2012). [**] T. Asaka, et al., Proceedings of LINAC2012, 486-488, TUPB006, (2012).
	Slides MOCLA02 [11.996 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

MOCLA03	Fully Intensity and Timing Jitter Compensated Ultra-Fast Experiments at Accelerator-Driven Photonsources at High Repetition Rates
	S. Kovalev, M. Gensch, B.W. Green HZDR, Dresden, Germany A.S. Fisher SLAC, Menlo Park, California, USA T. Golz, N. Stojanovic DESY, Hamburg, Germany T. Kampfrath FHI, Berlin, Germany
	Funding: European Union through project EUCALL Timing jitter and power instabilities are crucial parameters which greatly reduce the applicability of accelerator driven light sources for time-resolved experiments. In this contribution we present a technique that allows achieving few 10 fs time-resolution in experiments operating at cw repetition rates of up to 100 kHz by employing high repetition rate data acquisition. The method employs a fs-level arrival time monitor based on electro-optic sampling* of residual pulses from a coherent diffraction radiator and a fast THz detector allowing for pulse to pulse detection of arrival time and pump intensity. The monitor can operate at high repetition rates cw (presently up to a few 100 kHz) and low electron bunch charges (sub pC). The prototype device has been tested at the quasi CW SRF accelerator (ELBE) by performing an ultra-fast THz driven magnetization dynamics experiment. Our method has high potential to provide few fs level timing on next generation large scale X-ray photon sources based on high repetition rate electron accelerators such as LCLSII. A demonstrator aiming at operation up to 4.7 MHz is under development for the European X-FEL. Z. Jiang, X. C. Zhang, IEEE Journal of Quantum Electronics, 36, 1214, 2000 I. Wilke et al., Phys. Rev. Lett., 88, 124801, 2002. * S. Kovalev et. al., under review (2015).
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)