HB2012 - List of Authors (Shi, H.)

Paper	Title	Page
MOP214	Test System and Characteristics Studies of Ferrite Cores for the CSNS RCS RF System	81
	H. Shi, W.L. Huang, X. Li, W. Long, H. Sun, J.Y. Tang, C.L. Zhang IHEP, Beijing, People's Republic of China
	A two-ring ferrite test system for ferrite-loaded cavities of Rapid Cycling Synchrotron (RCS) of China Spallation Neutron Source (CSNS) has been developed. By this system, the RF characteristics of full-sized ferrite cores of RCS cavities have been studied. On dc bias current, the swept frequency range and thresholds of High Loss Effect (HLE) have been presented. On ac bias current of 25 Hz, although the shunt impedance of the cores satisfies the CSNS cavity, comparing with the dc bias, more power dissipation and more required bias current have been observed because the induced magnetic anisotropy of the ferrite cores disappears. Consequently, it is important to evaluate the dynamic features of the cores with 25 Hz bias current for designing the cavities, the power supplies and the bias current sources.

Paper

Title

Page

Test System and Characteristics Studies of Ferrite Cores for the CSNS RCS RF System

81

H. Shi, W.L. Huang, X. Li, W. Long, H. Sun, J.Y. Tang, C.L. Zhang
IHEP, Beijing, People's Republic of China

A two-ring ferrite test system for ferrite-loaded cavities of Rapid Cycling Synchrotron (RCS) of China Spallation Neutron Source (CSNS) has been developed. By this system, the RF characteristics of full-sized ferrite cores of RCS cavities have been studied. On dc bias current, the swept frequency range and thresholds of High Loss Effect (HLE) have been presented. On ac bias current of 25 Hz, although the shunt impedance of the cores satisfies the CSNS cavity, comparing with the dc bias, more power dissipation and more required bias current have been observed because the induced magnetic anisotropy of the ferrite cores disappears. Consequently, it is important to evaluate the dynamic features of the cores with 25 Hz bias current for designing the cavities, the power supplies and the bias current sources.