FEL2014 - List of Authors (Ellenberger, U.)

Paper

Title

Page

The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements

859

U. Ellenberger, H. Blumer, M. Heusser, M. Kleeb, L. Paly, M. Probst, T. Stapf
Paul Scherrer Institute, Villigen PSI, Switzerland
M. Bopp, A. Citterio, R. Zennaro
PSI, Villigen PSI, Switzerland

A pulse compressor is required to compress the RF power distributed to the four accelerating structures of a single C-band (5712 GHz) module of the SwissFEL. The pulse compressor is of the barrel open cavity (BOC) type. A total of 26 BOC devices are necessary to operate the linear accelerator (26 modules or 10⁴ C-band structures) of SwissFEL X-ray laser. The C-band BOC combines the advantages of compactness and large RF efficiency i.e. large compression factor. Key features of the BOC are described and how they have been implemented in the manufacturing and tuning processes. RF measurements of the BOC are presented to account for the mechanical precision reached by manufacturing. Up to August 2014 about 6 BOCs have been manufactured in-house and one has been high power tested in a RF test stand to simulate the operation in SwissFEL.

TUA04

Status of the SwissFEL C-band Linac

322

F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach
PSI, Villigen PSI, Switzerland

The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.

Slides TUA04 [11.482 MB]

Paper	Title	Page
THP056	The SwissFEL C-band RF Pulse Compressor: Manufacturing and Proof of Precision by RF Measurements	859
	U. Ellenberger, H. Blumer, M. Heusser, M. Kleeb, L. Paly, M. Probst, T. Stapf Paul Scherrer Institute, Villigen PSI, Switzerland M. Bopp, A. Citterio, R. Zennaro PSI, Villigen PSI, Switzerland
	A pulse compressor is required to compress the RF power distributed to the four accelerating structures of a single C-band (5712 GHz) module of the SwissFEL. The pulse compressor is of the barrel open cavity (BOC) type. A total of 26 BOC devices are necessary to operate the linear accelerator (26 modules or 10⁴ C-band structures) of SwissFEL X-ray laser. The C-band BOC combines the advantages of compactness and large RF efficiency i.e. large compression factor. Key features of the BOC are described and how they have been implemented in the manufacturing and tuning processes. RF measurements of the BOC are presented to account for the mechanical precision reached by manufacturing. Up to August 2014 about 6 BOCs have been manufactured in-house and one has been high power tested in a RF test stand to simulate the operation in SwissFEL.

TUA04	Status of the SwissFEL C-band Linac	322
	F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach PSI, Villigen PSI, Switzerland
	The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.
	Slides TUA04 [11.482 MB]