LBNL, Berkeley, California, USA
SLAC, Menlo Park, California, USA
JLAB, Newport News, Virginia, USA
Fermilab, Batavia, USA
The NGLS collaboration is developing design concepts for a multi-beamline soft x-ray FEL array powered by a superconducting linear accelerator, operating with a high bunch repetition rate of approximately 1 MHz. The CW superconducting linear accelerator design is based on developments of TESLA and ILC technology, and is supplied by an injector based on a high-brightness, high-repetition-rate photocathode electron gun. Electron bunches from the linac are distributed by RF deflecting cavities to the array of independently configurable FEL beamlines with nominal bunch rates of ~100 kHz in each FEL, with uniform pulse spacing, and some FELs capable of operating at the full linac bunch rate. Individual FELs may be configured for different modes of operation, including self-seeded and external-laser-seeded, and each may produce high peak and average brightness x-rays with a flexible pulse format, and with pulse durations ranging from femtoseconds and shorter, to hundreds of femtoseconds. In this paper we describe current design concepts, and progress in R&D activities.
SLAC, Menlo Park, California, USA
LBNL, Berkeley, California, USA
A high-resolution soft X-ray seeding monochromator has been designed for self-seeding the Next-Generation Light Source (NGLS). The seeding monochromator system consists of a single variable-line-spacing grating, three mirrors and an exit slit and operates in the “fixed-focus” mode to achieve complete tuning of the seeding energy in range from 200 to 2000 eV with a nearly constant resolving power of over 2x104. The optical delay is less than 1 ps. The design is based upon a fully coherent treatment of the SASE FEL beam propagating from the upstream SASE undulator through the entire seeding monochromator system. This approach guides the design optimization in order to preserve the transverse beam profile entering the seeding undulator to ensure maximum efficiency.