FEL2013 - List of Authors (Joehri, H.)

Paper	Title	Page
TUPSO22	Status of SwissFEL Undulator Lines	263
	R. Ganter, M. Aiba, H.-H. Braun, M. Calvi, P. Heimgartner, G. Janzi, H. Jöhri, R. Kobler, F. Löhl, M. Negrazus, L. Patthey, E. Prat, S. Reiche, S. Sanfilippo, U. Schaer, T. Schmidt, L. Schulz, V. Vranković, J. Wickstroem PSI, Villigen PSI, Switzerland
	An overview of the Aramis Hard-X ray FEL line of SwissFEL is presented, showing its future integration in the tunnel as well as the space reservation for possible future upgrades: Athos Soft X-ray FEL line, post-undulator deflecting cavities. The design of the FEL components like the energy collimator, the matching sections or the dog leg transfer line linking the linac to the future Athos line are almost completed. The characterization of the in-vacuum undulator prototype is described in a companion paper. The installation of the components will start in spring 2015 while the first photons are planned for December 2016 with the alignment and adjustment of the undulators foreseen for first SASE operation by spring 2017 .

TUPSO43	Status of the SwissFEL C-band Linear Accelerator	317
	F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro PSI, Villigen PSI, Switzerland U. Ellenberger Paul Scherrer Institute, Villigen PSI, Switzerland
	This paper will summarize the status of the linear accelerator of the Swiss free-electron laser SwissFEL. It will be based on C-band technology and will use solid-state modulators and a novel type of C-band accelerating structures which has been designed at PSI. Initial test results of first 2 m long structures will be presented together with measurements performed with the first BOC-type pulse compressors. Furthermore, we will present first results of a water cooling system for the accelerating structures and the pulse compressors.

Paper

Title

Page

Status of SwissFEL Undulator Lines

263

R. Ganter, M. Aiba, H.-H. Braun, M. Calvi, P. Heimgartner, G. Janzi, H. Jöhri, R. Kobler, F. Löhl, M. Negrazus, L. Patthey, E. Prat, S. Reiche, S. Sanfilippo, U. Schaer, T. Schmidt, L. Schulz, V. Vranković, J. Wickstroem
PSI, Villigen PSI, Switzerland

An overview of the Aramis Hard-X ray FEL line of SwissFEL is presented, showing its future integration in the tunnel as well as the space reservation for possible future upgrades: Athos Soft X-ray FEL line, post-undulator deflecting cavities. The design of the FEL components like the energy collimator, the matching sections or the dog leg transfer line linking the linac to the future Athos line are almost completed. The characterization of the in-vacuum undulator prototype is described in a companion paper. The installation of the components will start in spring 2015 while the first photons are planned for December 2016 with the alignment and adjustment of the undulators foreseen for first SASE operation by spring 2017 .

TUPSO43

Status of the SwissFEL C-band Linear Accelerator

317

F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro
PSI, Villigen PSI, Switzerland
U. Ellenberger
Paul Scherrer Institute, Villigen PSI, Switzerland

This paper will summarize the status of the linear accelerator of the Swiss free-electron laser SwissFEL. It will be based on C-band technology and will use solid-state modulators and a novel type of C-band accelerating structures which has been designed at PSI. Initial test results of first 2 m long structures will be presented together with measurements performed with the first BOC-type pulse compressors. Furthermore, we will present first results of a water cooling system for the accelerating structures and the pulse compressors.