FEL2011 - List of Authors (Will, I.)

Paper	Title	Page
THPA18	Operation of the FLASH Photoinjector Laser System	507
	S. Schreiber, M. Görler, K. Klose, T. Schulz, M. Staack DESY, Hamburg, Germany G. Klemz, G. Koss DESY Zeuthen, Zeuthen, Germany I.H. Templin, I. Will, H. Willert MBI, Berlin, Germany
	The photoinjector of FLASH uses an RF gun equipped with caesium telluride photocathodes illuminated by appropriate UV laser pulses as a source of ultra-bright electron beams. The superconducting accelerator of FLASH is able to accelerate thousands of electron bunches per second in burst mode. This puts special demands on the design of the electron source, especially the laser system. The fully diode pumped laser system is based on Nd:YLF and produces a train of 2400 UV pulses in a burst of 0.8 ms length with a repetition rate of 5 Hz and 800 pulses with 10 Hz. The single pulse energy is up to 25 μJ per pulse at 262 nm. The laser uses a pulsed oscillator synchronized to the master RF with a stability of better than 200 fs in arrival time at the RF gun. Special care has been taken to produce a uniform and stable pulse train in terms of pulse energy, shape, and phase. Since FLASH is a free-electron laser user facility, the laser is designed to operate for more than 8000 h per year without operator intervention and little maintenance. We report on operational experience with the new system brought in operation in spring 2010.

THPA06	Emittance for Different Bunch Charges at the Upgraded PITZ Facility	473
	S. Rimjaem, G. Asova, H.-J. Grabosch, M. Groß, L. Hakobyan, I.I. Isaev, Ye. Ivanisenko, M.A. Khojoyan, G. Klemz, M. Krasilnikov, M. Mahgoub, D. Malyutin, A. Oppelt, M. Otevřel, B. Petrosyan, A. Shapovalov, F. Stephan, G. Vashchenko, S. Weidinger DESY Zeuthen, Zeuthen, Germany M. Hoffmann, H. Schlarb DESY, Hamburg, Germany M.A. Nozdrin JINR, Dubna, Moscow Region, Russia D. Richter HZB, Berlin, Germany I.H. Templin, I. Will MBI, Berlin, Germany
	Optimizations of electron sources for short-wavelength Free Electron Laser (FELs) at the Photo Injector Test facility at DESY, location Zeuthen (PITZ) have been continued with a new radio frequency (RF) gun cavity, a new post-accelerating Cut Disk Structure (CDS) booster cavity and several upgraded diagnostic components. The new booster cavity allows stable operation with higher acceleration and longer pulse trains than the operation with the previous TESLA type cavity. Electron beams with a maximum mean momentum of about 25 MeV/c can be produced with the setup described in this paper. Together with the upgraded RF system for the gun and the new CDS booster cavity, the electron beam stability was significantly improved. A large fraction of the measurement program in 2010-2011was devoted to study the dependence of the transverse projected emittance on the bunch charge. Measurement results using this upgraded facility are reported and discussed.

THPA08	An Option of High Charge Operation for the European XFEL	481
	M. Krasilnikov, H.-J. Grabosch, M. Groß, L. Hakobyan, Ye. Ivanisenko, G. Klemz, M. Mahgoub, D. Malyutin, A. Oppelt, M. Otevřel, B. Petrosyan, S. Rimjaem, F. Stephan, G. Vashchenko, S. Weidinger DESY Zeuthen, Zeuthen, Germany G. Asova INRNE, Sofia, Bulgaria I.I. Isaev, A. Shapovalov MEPhI, Moscow, Russia M.A. Khojoyan ANSL, Yerevan, Armenia D. Richter HZB, Berlin, Germany E. Schneidmiller, M.V. Yurkov DESY, Hamburg, Germany I.H. Templin, I. Will MBI, Berlin, Germany
	The 1.3 GHz superconducting accelerator developed in the framework of TESLA and the European XFEL project holds potential to accelerate high charge electron beams. This feature has been successfully demonstrated during the first run of the free electron laser at the TESLA Test Facility with lasing driven by electron bunches with a charge of up to 4 nC. Currently DESY and the European XFEL GmbH perform revision of the baseline parameters for the electron beam. In this report we discuss a potential option of operation of the European XFEL driven by high charge (1 nC to 3 nC) electron beams. We present the results of the production and characterization of high charge electron bunches. Experiments have been performed at PITZ and demonstrated good properties of the electron beam in terms of emittance. Simulations of the radiation properties of SASE FELs show that application of high charge electron beams will open up the possibility to generate radiation pulse energies up to a few hundred milli-Joule level.

Paper

Title

Page

Operation of the FLASH Photoinjector Laser System

507

S. Schreiber, M. Görler, K. Klose, T. Schulz, M. Staack
DESY, Hamburg, Germany
G. Klemz, G. Koss
DESY Zeuthen, Zeuthen, Germany
I.H. Templin, I. Will, H. Willert
MBI, Berlin, Germany

The photoinjector of FLASH uses an RF gun equipped with caesium telluride photocathodes illuminated by appropriate UV laser pulses as a source of ultra-bright electron beams. The superconducting accelerator of FLASH is able to accelerate thousands of electron bunches per second in burst mode. This puts special demands on the design of the electron source, especially the laser system. The fully diode pumped laser system is based on Nd:YLF and produces a train of 2400 UV pulses in a burst of 0.8 ms length with a repetition rate of 5 Hz and 800 pulses with 10 Hz. The single pulse energy is up to 25 μJ per pulse at 262 nm. The laser uses a pulsed oscillator synchronized to the master RF with a stability of better than 200 fs in arrival time at the RF gun. Special care has been taken to produce a uniform and stable pulse train in terms of pulse energy, shape, and phase. Since FLASH is a free-electron laser user facility, the laser is designed to operate for more than 8000 h per year without operator intervention and little maintenance. We report on operational experience with the new system brought in operation in spring 2010.

THPA06

Emittance for Different Bunch Charges at the Upgraded PITZ Facility

473

S. Rimjaem, G. Asova, H.-J. Grabosch, M. Groß, L. Hakobyan, I.I. Isaev, Ye. Ivanisenko, M.A. Khojoyan, G. Klemz, M. Krasilnikov, M. Mahgoub, D. Malyutin, A. Oppelt, M. Otevřel, B. Petrosyan, A. Shapovalov, F. Stephan, G. Vashchenko, S. Weidinger
DESY Zeuthen, Zeuthen, Germany
M. Hoffmann, H. Schlarb
DESY, Hamburg, Germany
M.A. Nozdrin
JINR, Dubna, Moscow Region, Russia
D. Richter
HZB, Berlin, Germany
I.H. Templin, I. Will
MBI, Berlin, Germany

Optimizations of electron sources for short-wavelength Free Electron Laser (FELs) at the Photo Injector Test facility at DESY, location Zeuthen (PITZ) have been continued with a new radio frequency (RF) gun cavity, a new post-accelerating Cut Disk Structure (CDS) booster cavity and several upgraded diagnostic components. The new booster cavity allows stable operation with higher acceleration and longer pulse trains than the operation with the previous TESLA type cavity. Electron beams with a maximum mean momentum of about 25 MeV/c can be produced with the setup described in this paper. Together with the upgraded RF system for the gun and the new CDS booster cavity, the electron beam stability was significantly improved. A large fraction of the measurement program in 2010-2011was devoted to study the dependence of the transverse projected emittance on the bunch charge. Measurement results using this upgraded facility are reported and discussed.

THPA08

An Option of High Charge Operation for the European XFEL

481

M. Krasilnikov, H.-J. Grabosch, M. Groß, L. Hakobyan, Ye. Ivanisenko, G. Klemz, M. Mahgoub, D. Malyutin, A. Oppelt, M. Otevřel, B. Petrosyan, S. Rimjaem, F. Stephan, G. Vashchenko, S. Weidinger
DESY Zeuthen, Zeuthen, Germany
G. Asova
INRNE, Sofia, Bulgaria
I.I. Isaev, A. Shapovalov
MEPhI, Moscow, Russia
M.A. Khojoyan
ANSL, Yerevan, Armenia
D. Richter
HZB, Berlin, Germany
E. Schneidmiller, M.V. Yurkov
DESY, Hamburg, Germany
I.H. Templin, I. Will
MBI, Berlin, Germany

The 1.3 GHz superconducting accelerator developed in the framework of TESLA and the European XFEL project holds potential to accelerate high charge electron beams. This feature has been successfully demonstrated during the first run of the free electron laser at the TESLA Test Facility with lasing driven by electron bunches with a charge of up to 4 nC. Currently DESY and the European XFEL GmbH perform revision of the baseline parameters for the electron beam. In this report we discuss a potential option of operation of the European XFEL driven by high charge (1 nC to 3 nC) electron beams. We present the results of the production and characterization of high charge electron bunches. Experiments have been performed at PITZ and demonstrated good properties of the electron beam in terms of emittance. Simulations of the radiation properties of SASE FELs show that application of high charge electron beams will open up the possibility to generate radiation pulse energies up to a few hundred milli-Joule level.