SLAC, Menlo Park, California, USA
The FEL of the Linac Coherent Light Source (LCLS) at SLAC is generated in a 132 m long undulator. By introducing a kink in the undulator setup and launching different electron pulses with a small kick, we achieved two FEL beams with a separation of about 10 σ. These beams were separated at down stream mirrors and brought to the entrances of the soft and hard X-ray hutches. This was done at low energy creating soft X-rays which require only a shorter length to get to saturation. At high energy the whole undulator has to be "re-pointed" pulse by pulse. This can be done using 33 undulator correctors creating two straight lines for the photons with small angle to point the FEL to different mirrors pulse by pulse even at high energy. Experiments will be presented and further ideas discussed to get different energy photons created and sent to the soft and hard X-ray mirrors and experiments.
SLAC, Menlo Park, California, USA
Understanding and controlling the transverse size and distribution of FEL X-ray radiation of the LCLS at the SLAC National Accelerator Laboratory is discussed. Understanding divergence, source size, and distributions under various conditions is a convolution of many effects such as the electron distribution, the undulator alignment, micro-bunching suppression, and beta-match. Measurements of transverse size along the X-ray pulse and other studies designed to sort out the dominant effects are presented and discussed.
