• Y. Feng, J.B. Hastings, J. Krzywinski, M. Rowen, J. Wu
  SLAC, Menlo Park, California
• P.A. Heimann
  LBNL, Berkeley, California

A complete optical system including grating monochromator and mirrors was designed to provide self-seeding of the soft X-ray undulators to be possibly built as part of the LCLS-II project. The grating monochromator consisted of a cylindrical horizontally focusing mirror, a plane vertically deflecting pre-mirror, a variable-line-spacing plane vertically deflecting grating, a horizontal exit slits, and a spherical vertically collimating mirror. The grating monochromator was designed to operate in the fixed-focus mode and tuning of the energy was designed to be achieved by rotations of only the pre-mirror and the grating. Only one ruling of 2200 l/mm was needed to cover the energy range from 200 to 2000 eV with an almost constant resolving power of greater than 22700. The monochromator would produce fully transform-limited pulses of 12 fs (rms) long at 2000 eV or 120 fs (rms) long at 200 eV with sufficient power to allow seeding. The optical system produced a slightly energy-dependent time delay of about 10 ps. The transverse size of the input beam was preserved in the horizontal direction, but was reduced in the vertical direction depending on the tuning energy.