BIW2012 - List of Authors (Padrazo, D.)

Paper	Title	Page
MOPG004	NSLS-II Beam Intensity Measurement	26
	D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, G.M. Wang BNL, Upton, Long Island, New York, USA
	Beam intensity, also named beam charge or beam current, is one of the most important beam parameters for synchrotron light sources. At NSLS-II, there are at least two types of beam intensity monitors including Bergoz ICT, and Bergoz NPCT. The requirements of beam intensity measurements and the distribution of beam monitors are described. The EPICS-based controls and data acquisition systems for all intensity monitors are presented.

TUPG019	NSLS-II Injector System Diagnostics Update for LINAC Commissioning	173
	D. Padrazo, R.P. Fliller, Y. Hu, B.N. Kosciuk, I. Pinayev, S. Seletskiy, T.V. Shaftan, O. Singh BNL, Upton, Long Island, New York, USA
	The NSLS-II Injector System Diagnostics will provide adequate instrumentation in the LINAC, and LTB (LINAC To Booster), to perform staged commissioning of NSLS-II LINAC. This instrumentation will provide sufficient diagnostics to determine bunch charge, length, transverse size, position, and beam losses. The LTB will include key instruments to be used for beam commissioning and tune-up, particularly, BPM, Beam Dumps / Faraday Cup, ICT, FCT, Flags, and Energy Slit. Measurements of beam charge, bunch train, bunch charge, energy jitter, emittance, and energy spread, as well as measurements for beam current, bunch train pattern, tune and chromaticity can be achieved. This paper will detail the implementation and status of these diagnostics components for the NSLS-II injector system.

Paper

Title

Page

NSLS-II Beam Intensity Measurement

26

D. Padrazo, B. Bacha, Y. Hu, I. Pinayev, G.M. Wang
BNL, Upton, Long Island, New York, USA

Beam intensity, also named beam charge or beam current, is one of the most important beam parameters for synchrotron light sources. At NSLS-II, there are at least two types of beam intensity monitors including Bergoz ICT, and Bergoz NPCT. The requirements of beam intensity measurements and the distribution of beam monitors are described. The EPICS-based controls and data acquisition systems for all intensity monitors are presented.

TUPG019

NSLS-II Injector System Diagnostics Update for LINAC Commissioning

173

D. Padrazo, R.P. Fliller, Y. Hu, B.N. Kosciuk, I. Pinayev, S. Seletskiy, T.V. Shaftan, O. Singh
BNL, Upton, Long Island, New York, USA

The NSLS-II Injector System Diagnostics will provide adequate instrumentation in the LINAC, and LTB (LINAC To Booster), to perform staged commissioning of NSLS-II LINAC. This instrumentation will provide sufficient diagnostics to determine bunch charge, length, transverse size, position, and beam losses. The LTB will include key instruments to be used for beam commissioning and tune-up, particularly, BPM, Beam Dumps / Faraday Cup, ICT, FCT, Flags, and Energy Slit. Measurements of beam charge, bunch train, bunch charge, energy jitter, emittance, and energy spread, as well as measurements for beam current, bunch train pattern, tune and chromaticity can be achieved. This paper will detail the implementation and status of these diagnostics components for the NSLS-II injector system.