• I. Marneris, S. V. Badea, R. Bonati, T. Roser, J. Sandberg
  BNL, Upton, Long Island, New York

The Brookhaven AGS Main Magnet Power Supply (MMPS) is a thyristor control supply rated at 5500 Amps, ±9000 Volts. The peak magnet power is 50 MWatts. The power supply is fed from a motor/generator manufactured by Siemens. The generator is 3 phase 7500 Volts rated at 50 MVA. The peak power requirements come from the stored energy in the rotor of the motor/generator. The motor generator is about 45 years old and Siemens is not manufacturing similar machines in the future. We are therefore investigating different ways of storing energy for future AGS MMPS operation. This paper will present simulations of a power supply where energy is stored in capacitor banks. Two dc to dc converters will be presented. The switching elements would be IGCT's made by ABB. The simulation program used is called PSIM Version 6.1. The control system of the power supply will also be presented. The average power from the Long Island Power Authority (LIPA) into the power supply will be kept constant during the pulsing of the magnets at ±50 MW. The reactive power will also be kept constant below 1.5 MVAR. Waveforms will be presented.

• W. Zhang, I. Marneris, J. Sandberg
  BNL, Upton, Long Island, New York

Large accelerator main magnet system consists of hundreds, even thousands, of dipole magnets. They are linked together under selected configurations to provide highly uniform dipole fields when powered. Distributed capacitance, insulation resistance, coil resistance, magnet inductance, and coupling inductance of upper and lower pancakes make each magnet a complex network. When all dipole magnets are chained together in a circle, they become a coupled pair of very high order complex ladder networks. In this study, a network of more than thousand inductive, capacitive or resistive elements are used to model an actual system. The circuit is a large scale network. Its equivalent polynomial form has several hundred degrees. Analysis of this high order circuit and simulation of the response of any or all components is often computationally infeasible. We present methods to use frequency decomposition approach to effectively simulate and analyze magnet configuration and power supply topologies.

• W. Zhang, I. Marneris, J. Sandberg
  BNL, Upton, Long Island, New York

A main magnet chain forms a pair of transmission lines. Pulse-reflection-caused voltage and current differentiation throughout the magnet chain can have adverse effect on main magnet field quality. This effect is associated with magnet system configuration, coupling efficiency, and parasitic parameters. A better understanding of this phenomenon will help us in new design and existing system upgrade. In this paper, we exam the transmission line effect due to different input functions as well as configuration, coupling, and other parameters.