A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Lewandowski, J. R.

Paper Title Page
TUPMS047 Results of the SLAC LCLS Gun High-Power RF Tests 1296
 
  • D. Dowell, E. N. Jongewaard, J. R. Lewandowski, Z. Li, C. Limborg-Deprey, J. F. Schmerge, A. E. Vlieks, J. W. Wang, L. Xiao
    SLAC, Menlo Park, California
  
  Funding: SLAC is operated by Stanford University for the Department of Energy under contract number DE-AC03-76SF00515.

The beam quality and operational requirements for the Linac Coherent Light Source (LCLS) currently being constructed at SLAC are exceptional, requiring the design of a new RF photocathode gun for the electron source. Based on operational experience at GTF at SLAC, SDL and ATF at BNL and other laboratories, the 1.6cell s-band (2856MHz) gun was chosen to be the best electron source for the LCLS injector, however a significant re-design was necessary to achieve the challenging parameters. Detailed 3-D analysis and design was used to produce nearly-perfect rotationally symmetric rf fields to achieve the emittance requirement. In addition, the thermo-mechanical design allows the gun to operate at 120Hz and a 140MV/m cathode field, or to an average power dissipation of 4kW. Both average and pulsed heating issues are addressed in the LCLS gun design. The first LCLS gun is now fabricated and has been operated with high-power RF. The results and analysis of these high-power tests will be presented.

 
WEPMS018 Superconducting Materials Testing with a High-Q Copper RF Cavity 2370
 
  • A. Canabal, T. Tajima
    LANL, Los Alamos, New Mexico
  • G. B. Bowden, V. A. Dolgashev, J. R. Lewandowski, C. D. Nantista, S. G. Tantawi
    SLAC, Menlo Park, California
  • I. E. Campisi
    ORNL, Oak Ridge, Tennessee
  
  Magnesium diboride (MgB2) has a transition temperature (Tc) of ~40 K, i.e., about 4 times higher than niobium (Nb) that has been used for recent accelerators. The studies in the last 3 years have shown that it could have about one order of magnitude less RF surface resistance (Rs) than Nb and much less power dependence compared to high-Tc materials such as YBCO up to ~400 Oe. The tests to check the RF critical magnetic field, an important parameter to determine the feasibility for accelerator application, are underway. We are planning to test different thickness films and with different coating methods. This paper describes the results obtained so far. One of the objectives is to verify Gurevich's theory of getting higher critical field than Nb by adding a very thin layer (less than penetration depth) to Nb. In addition, some CW tests on power dependence up to higher magnetic fields are planned and some results will be shown if available at the time of conference.