A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Jeon, D.-O.

Paper Title Page
TUPAN012 High Intensity Heavy Ion Beam Emittance Measurements at the GSI UNILAC 1413
 
  • W. B. Bayer, W. Barth, L. A. Dahl, P. Forck, P. Gerhard, L. Groening, I. Hofmann, S. Yaramyshev
    GSI, Darmstadt
  • D.-O. Jeon
    ORNL, Oak Ridge, Tennessee
  
  Funding: We acknowledge the support of the European Community-Research Infrastructure Activity under the FP6 "Structuring the European Research Area" programme (CARE, contract number RII3-CT-2003-506395).

The GSI UNILAC, a heavy ion linac originally dedicated for low current beam operation, together with the synchrotron SIS 18 will serve as an high current injector for FAIR (International Facility for Antiproton and Ion Research). The UNILAC post stripper accelerator consists of five Alvarez tanks with a final energy of 11.4 MeV/u. In order to meet the requirements of FAIR (15emA 238U28+, transverse normalised emittances of 0.8mm mrad and 2.5mm mrad) an UNILAC upgrade program is foreseen to increase the primary beam intensity as well as the beam brilliance. A detailed understanding of the beam dynamics during acceleration and transport of space charge dominated beams is necessary. For this purpose the study of the beam brilliance dependency on the phase advances in the Alvarez DTL is suited. Machine investigations were performed with various beam diagnostics devices established in the UNILAC. Measurements done in 2006 using an high intensity heavy ion beam coincide with the beam dynamics work package of the European JRA "High Intensity Pulsed Proton Injector" (HIPPI). Results of these measurements are presented as well as corresponding beam dynamics simulations.

 
TUPAS074 Performance of the SNS Front End and Linac 1820
 
  • A. V. Aleksandrov, S. Assadi, W. Blokland, P. Chu, S. M. Cousineau, V. V. Danilov, C. Deibele, J. Galambos, S. Henderson, D.-O. Jeon, M. A. Plum, A. P. Shishlo, M. P. Stockli, Y. Zhang
    ORNL, Oak Ridge, Tennessee
  
  Funding: SNS is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U. S. Department of Energy.

The Spallation Neutron Source accelerator systems will deliver a 1.0 GeV, 1.4 MW proton beam to a liquid mercury target for neutron scattering research. The accelerator complex consists of an H- injector, capable of producing one-ms-long pulses at 60 Hz repetition rate with 38 mA peak current, a 1 GeV linear accelerator, an accumulator ring and associated transport lines. The 2.5 MeV beam from the Front End is accelerated to 86 MeV in the Drift Tube Linac, then to 185 MeV in a Coupled-Cavity Linac and finally to 1 GeV in the Superconducting Linac. With the completion of beam commissioning, the accelerator complex began operation in June 2006 and beam power is being gradually ramped up toward the design goal. Operational experience with the injector and linac will be presented including chopper performance, transverse emittance evolution along the linac, and the results of a beam loss study.