IPAC2017 - List of Authors (Tsakanian, A.V.)

Paper	Title	Page
TUPAB020	AREAL 50 MeV Electron Accelerator Project for THz and Middle IR FEL	1355
	G.A. Amatuni, Z.G. Amirkhanyan, V.S. Avagyan, A. Azatyan, V. Danielyan, H. Davtyan, S.G. Dekhtiarov, N. Ghazaryan, B. Grigoryan, L. Hakobyan, M. Ivanyan, V.G. Khachatryan, E.M. Laziev, T. Markosyan, N. Martirosyan, Sh.A. Mehrabyan, T. Melkumyan, T.H. Mkrtchyan, V.H. Petrosyan, V. Sahakyan, A. Sargsyan, A.S. Simonyan, A.V. Tsakanian, V.M. Tsakanov, A. Vardanyan, Ta.S. Vardanyan, T.L. Vardanyan, V. V. Vardanyan, A.S. Yeremyan, G.S. Zanyan CANDLE SRI, Yerevan, Armenia P.S. Manukyan SEUA, Yerevan, Armenia A.V. Tsakanian HZB, Berlin, Germany
	Advanced Research Electron Accelerator Laboratory (AREAL) is an electron accelerator project based on photo cathode RF gun. First phase of the facility is a 5 MeV energy RF photogun, which is currently under operation. The facility development implies energy upgrade to 50 MeV with further delivery of the electron beam to the undulator sections for Free Electron Laser and coherent undulator radiation generation in MIR and THz frequency ranges respectively. In this report the design study of AREAL 50 MeV facility main systems along with the beam dynamics and characteristics of expected radiation are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA052	Study on HOM Power Levels in the BESSY VSR Module	982
	A.V. Tsakanian, H.-W. Glock, J. Knobloch, A.V. Vélez HZB, Berlin, Germany
	The BESSY VSR upgrade of the BESSY II light source represents a novel approach to simultaneously store of long (ca. 15ps) and short (ca. 1.5ps) bunches in the storage ring with the 'standard' user optics. This challenging goal requires installation of four new SRF cavities (2x1.5GHz and 2x1.75GHz) in a single module to minimize space requirements. These cavities are equipped with strong waveguide and beam tube HOM dampers necessary for stable operation. The expected HOM power and spectrum has been analyzed for the complete module. This study is performed for various BESSY VSR bunch filling patterns with 300 mA beam current. In the module different cavity arrangements are analyzed to reach the optimal operation conditions with equally distributed power portions in warm HOM loads and tolerable beam coupling impedance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA052
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA053	The SRF Module Developments for BESSY VSR	986
	A.V. Vélez, H.-W. Glock, F. Glöckner, B.D.S. Hall, J. Knobloch, A. Neumann, P. Schnizer, E. Sharples, A.V. Tsakanian HZB, Berlin, Germany
	Helmholtz-Zentrum Berlin is developing BESSY VSR, a novel upgrade of the BESSY II facility to provide highly flexible pulse lengths while maintaining the flux and brilliance. The project goal is to simultaneously circulate both standard (some 10 ps long) and short (ps and sub-ps long) pulses offering the BESSY user community picosecond dynamics and high-resolution experiments. The concept relies on the installation of high-voltage SRF cavities operating at the 3rd and 3.5th harmonic whereby the beating of the two frequencies provides RF buckets for long and short bunches. Since these cavities will operate in CW and with high beam current (Ib=300 mA), the cavity design represents a challenging goal. In addition the need to avoid coupled bunch instabilities (CBI's), the installation of the VSR Cryomodule must fit in one of the available 4-m long low beta straights. To address the technological and engineering challenges techniques such as waveguide-damped cavities have been developed. First prototypes have been produced. In this paper, the present SRF developments are presented, including the cavities, high power couplers, higher-order mode absorbers and the cryomodule design.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA130	Development of Waveguide HOM Loads for BERLinPro and BESSY-VSR SRF Cavities	1160
	J. Guo, F. Fors, J. Henry, R.A. Rimmer, H. Wang JLab, Newport News, Virginia, USA H.-W. Glock, A. Neumann, A.V. Tsakanian, A.V. Vélez HZB, Berlin, Germany
	Two ongoing accelerator projects at Helmholtz-Zentrum Berlin (HZB), BERLinPro and BESSY-VSR, need to design three different SRF cavities, a 1.3GHz cavity in BERLinPro and 1.5GHz/1.75GHz cavities in BESSY-VSR. These cavities have adopted waveguide HOM dampers in their design, with a few tens of watts HOM power in each load for BERLinPro and a few hundred watts for BESSY-VSR. JLab is collaborating with HZB prototyping these HOM loads. In this paper, we will report on the integrated RF-thermal-mechanical design of the loads, as well as the fabrication and testing results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA130
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK001	Copper Accelerating Structure Fabrication With Controled Cu-Ag Joining Conditions	4104
	V. Danielyan, V.S. Avagyan, S.G. Dekhtiarov, T.H. Mkrtchyan, S. Naghdalyan, A.S. Simonyan, V. V. Vardanyan CANDLE SRI, Yerevan, Armenia A.V. Tsakanian HZB, Berlin, Germany
	The paper is devoted to the development of technological processes of copper accelerating structures fabrication from oxygen-free copper. The experimental set-up for vacuum brazing of long accelerating structures with optimal Cu-Ag joining conditions is described. The experimental results of precise machining and subsequent vacuum brazing of Ag-Cu eutectic are presented
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK014	Travelling Wave Accelerating Structure for Areal 50 MeV Energy Upgrade	4130
	A. Vardanyan, V. Danielyan, S.G. Dekhtiarov, B. Grigoryan, L. Hakobyan, T. Markosyan, A.S. Simonyan CANDLE SRI, Yerevan, Armenia W. Ackermann TEMF, TU Darmstadt, Darmstadt, Germany A.V. Tsakanian HZB, Berlin, Germany
	AREAL facility development implies energy upgrade to 50 MeV in order to drive a THz free electron laser. To reach this goal, the installation of two 1.6 m long S-Band travelling wave accelerating sections, with nominal accel-erating gradient of 15 MV/m, are foreseen. In this paper the design study of accelerating sections along with the matching performance of RF couplers are presented. The simulations are performed using the CST Microwave Studio. The first results of the accelerating structure proto-type fabrication are discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK014
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

AREAL 50 MeV Electron Accelerator Project for THz and Middle IR FEL

1355

G.A. Amatuni, Z.G. Amirkhanyan, V.S. Avagyan, A. Azatyan, V. Danielyan, H. Davtyan, S.G. Dekhtiarov, N. Ghazaryan, B. Grigoryan, L. Hakobyan, M. Ivanyan, V.G. Khachatryan, E.M. Laziev, T. Markosyan, N. Martirosyan, Sh.A. Mehrabyan, T. Melkumyan, T.H. Mkrtchyan, V.H. Petrosyan, V. Sahakyan, A. Sargsyan, A.S. Simonyan, A.V. Tsakanian, V.M. Tsakanov, A. Vardanyan, Ta.S. Vardanyan, T.L. Vardanyan, V. V. Vardanyan, A.S. Yeremyan, G.S. Zanyan
CANDLE SRI, Yerevan, Armenia
P.S. Manukyan
SEUA, Yerevan, Armenia
A.V. Tsakanian
HZB, Berlin, Germany

Advanced Research Electron Accelerator Laboratory (AREAL) is an electron accelerator project based on photo cathode RF gun. First phase of the facility is a 5 MeV energy RF photogun, which is currently under operation. The facility development implies energy upgrade to 50 MeV with further delivery of the electron beam to the undulator sections for Free Electron Laser and coherent undulator radiation generation in MIR and THz frequency ranges respectively. In this report the design study of AREAL 50 MeV facility main systems along with the beam dynamics and characteristics of expected radiation are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA052

Study on HOM Power Levels in the BESSY VSR Module

982

A.V. Tsakanian, H.-W. Glock, J. Knobloch, A.V. Vélez
HZB, Berlin, Germany

The BESSY VSR upgrade of the BESSY II light source represents a novel approach to simultaneously store of long (ca. 15ps) and short (ca. 1.5ps) bunches in the storage ring with the 'standard' user optics. This challenging goal requires installation of four new SRF cavities (2x1.5GHz and 2x1.75GHz) in a single module to minimize space requirements. These cavities are equipped with strong waveguide and beam tube HOM dampers necessary for stable operation. The expected HOM power and spectrum has been analyzed for the complete module. This study is performed for various BESSY VSR bunch filling patterns with 300 mA beam current. In the module different cavity arrangements are analyzed to reach the optimal operation conditions with equally distributed power portions in warm HOM loads and tolerable beam coupling impedance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA052

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA053

The SRF Module Developments for BESSY VSR

986

A.V. Vélez, H.-W. Glock, F. Glöckner, B.D.S. Hall, J. Knobloch, A. Neumann, P. Schnizer, E. Sharples, A.V. Tsakanian
HZB, Berlin, Germany

Helmholtz-Zentrum Berlin is developing BESSY VSR, a novel upgrade of the BESSY II facility to provide highly flexible pulse lengths while maintaining the flux and brilliance. The project goal is to simultaneously circulate both standard (some 10 ps long) and short (ps and sub-ps long) pulses offering the BESSY user community picosecond dynamics and high-resolution experiments. The concept relies on the installation of high-voltage SRF cavities operating at the 3rd and 3.5th harmonic whereby the beating of the two frequencies provides RF buckets for long and short bunches. Since these cavities will operate in CW and with high beam current (Ib=300 mA), the cavity design represents a challenging goal. In addition the need to avoid coupled bunch instabilities (CBI's), the installation of the VSR Cryomodule must fit in one of the available 4-m long low beta straights. To address the technological and engineering challenges techniques such as waveguide-damped cavities have been developed. First prototypes have been produced. In this paper, the present SRF developments are presented, including the cavities, high power couplers, higher-order mode absorbers and the cryomodule design.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA130

Development of Waveguide HOM Loads for BERLinPro and BESSY-VSR SRF Cavities

1160

J. Guo, F. Fors, J. Henry, R.A. Rimmer, H. Wang
JLab, Newport News, Virginia, USA
H.-W. Glock, A. Neumann, A.V. Tsakanian, A.V. Vélez
HZB, Berlin, Germany

Two ongoing accelerator projects at Helmholtz-Zentrum Berlin (HZB), BERLinPro and BESSY-VSR, need to design three different SRF cavities, a 1.3GHz cavity in BERLinPro and 1.5GHz/1.75GHz cavities in BESSY-VSR. These cavities have adopted waveguide HOM dampers in their design, with a few tens of watts HOM power in each load for BERLinPro and a few hundred watts for BESSY-VSR. JLab is collaborating with HZB prototyping these HOM loads. In this paper, we will report on the integrated RF-thermal-mechanical design of the loads, as well as the fabrication and testing results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA130

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK001

Copper Accelerating Structure Fabrication With Controled Cu-Ag Joining Conditions

4104

V. Danielyan, V.S. Avagyan, S.G. Dekhtiarov, T.H. Mkrtchyan, S. Naghdalyan, A.S. Simonyan, V. V. Vardanyan
CANDLE SRI, Yerevan, Armenia
A.V. Tsakanian
HZB, Berlin, Germany

The paper is devoted to the development of technological processes of copper accelerating structures fabrication from oxygen-free copper. The experimental set-up for vacuum brazing of long accelerating structures with optimal Cu-Ag joining conditions is described. The experimental results of precise machining and subsequent vacuum brazing of Ag-Cu eutectic are presented

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK014

Travelling Wave Accelerating Structure for Areal 50 MeV Energy Upgrade

4130

A. Vardanyan, V. Danielyan, S.G. Dekhtiarov, B. Grigoryan, L. Hakobyan, T. Markosyan, A.S. Simonyan
CANDLE SRI, Yerevan, Armenia
W. Ackermann
TEMF, TU Darmstadt, Darmstadt, Germany
A.V. Tsakanian
HZB, Berlin, Germany

AREAL facility development implies energy upgrade to 50 MeV in order to drive a THz free electron laser. To reach this goal, the installation of two 1.6 m long S-Band travelling wave accelerating sections, with nominal accel-erating gradient of 15 MV/m, are foreseen. In this paper the design study of accelerating sections along with the matching performance of RF couplers are presented. The simulations are performed using the CST Microwave Studio. The first results of the accelerating structure proto-type fabrication are discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK014

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)