| Paper | Title | Page |
|---|---|---|
| MOPIK031 | COSY Extraction Line Characterization and Modeling | 567 |
|
||
| COSY is a versatile racetrack-type synchrotron accelerating protons and deuterons in a range of rigidity between 1 T m and 11 T m. Circulating beam can be slowly extracted on a third order resonance and channeled towards different users. New users of the COSY beam have presented new challenges with specific requests, most notably in term of beam shape. This in turn drove a strong interest to develop and improve characterization and modeling methods in the COSY extraction beam line. In this contribution we will present the different beam characterization methods used and their limitations. We will then discuss the modeling of the line and the importance of an accurate and reliable model of the extraction line. Some of the latest beam measurements are presented and compared to modeled results. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK031 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPIK067 | Beam-Dynamics Simulation Studies for the HESR | 3084 |
|
||
|
The High Energy Storage Ring (HESR) is part of the future Facility for Antiproton and Ion Research (FAIR) placed in Darmstadt (Germany). The HESR is designed for antiprotons with a momentum range from 1.5 GeV/c to 15 GeV/c, but will as well be suitable to provide heavy ion beams with a momentum range from approximately 0.6 GeV/c to 5.8 GeV/c. To guarantee smooth operation it is crucial to verify and to optimize the design with beam-dynamics simulations. Within recent studies* calculations based on a variant of the Lyapunov exponent were carried out to estimate the dynamic aperture. The studies could reproduce expected influences as reduced aperture due to tune resonances and tune shifts due to coupling. Thus they can be extended to investigate the dynamic behaviour of the beam and identify the main restrictions to the dynamic aperture near the chosen betatron tune. Furthermore ongoing measurements of the magnetic fields of the already produced bending dipoles and quadrupoles deliver a more precise insight to the harmonic content of these elements. Thus the existing simulations could now be updated by including the new measurement results.
*J. Hetzel, A. Lehrach, U. Bechstedt, J. Böker, B. Lorentz, R. Tölle: Towards Beam-Dynamics Simulations Including More Realistic Field Descriptions for the HESR, IPAC'16 |
||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK067 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
| WEPVA050 | Developments for the Injection Kicker Vacuum System of the HESR at FAIR | 3369 |
|
||
| The Research Center Jülich has taken the leadership of a consortium being responsible for the design and manufacturing of the High-Energy Storage Ring (HESR) going to be part of FAIR. The HESR is designed both for antiprotons and for heavy ion experiments. The injection kicker system of the HESR is located directly behind the septum and consists of two pumping crosses for pumps and measurement devices as well as two vacuum tanks housing the four ferrite magnets which will be operated with 40 kV, 4kA. As well as the magnets, the adjustments frames and the electrical feedthroughs will be installed inside the tanks. Due to the large surface of the magnets the injection kicker system will be very sensitive with regard to the achievable vacuum quality that is expected to be in the order of 10-11 mbar or better. Thus the vacuum system is designed to heat up to 250°C. In order to investigate the achievable end pressure and to develop the heating system a test facility was constructed. The actual vacuum layout of the injection kicker system as well as the experimental test results will be presented and in similar the layout of the control system of the test facility will be described. | ||
| DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA050 | |
| Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |