IPAC2017 - List of Authors (Tawada, M.)

Paper	Title	Page
WEPAB044	Construction and Commissioning of Direct Beam Transport Line for PF-AR	2678
	N. Higashi, S. Asaoka, K. Furukawa, K. Haga, K. Harada, T. Higo, T. Honda, H. Honma, N. Iida, H. Iwase, K. Kakihara, T. Kamitani, M. Kikuchi, Y. Kishimoto, Y. Kobayashi, K. Kodama, K. Kudo, T. Kume, K. Mikawa, T. Mimashi, F. Miyahara, H. Miyauchi, S. Nagahashi, H. Nakamura, N. Nakamura, T. Natsui, K.N. Nigorikawa, Y. Niwa, T. Nogami, T. Obina, Y. Ogawa, M. Ono, T. Ozaki, H. Sagehashi, T. Sanami, M. Sato, M. Satoh, T. Suwada, M. Tadano, T. Tahara, R. Takai, H. Takaki, S. Takasaki, M. Tanaka, Y. Tanimoto, M. Tawada, N. Toge, T. Uchiyama, A. Ueda, Y. Yamada, M. Yamamoto, M. Yoshida KEK, Ibaraki, Japan
	PF-AR was constructed as an accumulator ring for TRISTAN, and in the KEKB era it has been revitalized as a 6.5 GeV synchrotron radiation source. The injection energy was 3 GeV and the beam was accelerated to 6.5 GeV prior to the user run. The original beam transport line (BT) from the LINAC to the PF-AR shared its upstream part with the the BT line of KEKB High Energy Ring (HER). The injection-mode change from PF-AR to HER or vice versa needs about 10 minutes for the magnet cycling procedure of the shared part. In SuperKEKB, the upgrade of KEKB, the lifetime of HER is about 10 minutes. The mode-switch operation of the BT is, therefore, not allowed for maintaining the highest luminosity of the SuperKEKB. In order to avoid this problem, a new 6.5 GeV BT line dedicated to PF-AR has been constructed. This also enables the top-up injection for the user run. The commissioning of the new BT line has been completed in this March, and now the first user run has been operated successfully.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK006	Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB	2918
	N. Iida, M. Kikuchi, K. Kodama, T. Mimashi, T. Mori, Y. Ohnishi, K. Oide, H. Sugimoto, M. Tawada KEK, Ibaraki, Japan
	The first commissioning of SuperKEKB, Phase 1, was performed from February 2016 for five months. A Lambertson septum magnet is utilized to vertically extract the aborted beam, kicked by the horizontal abort kickers upstream into a beam dump. This magnet creates unexpected leak field with a non-negligible skew quadrupole component to the stored beam. Two kinds of skew quadrupole magnets are installed on both sides of the Lambertson septum. One is additional skew windings on the sextupole magnet, and the other is a skew quadrupole magnet with permanent magnets. This paper will report that the cancellations of the leak fields was successful and useful for optics correction.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK013	Electron Beam Injection Septum	2943
	T. Mori, N. Iida, M. Kikuchi, T. Mimashi, Y. Sakamoto, S. Takasaki, M. Tawada KEK, Ibaraki, Japan
	The SuperKEKB project is in progress toward the initial physics run in autumn 2018. It assumes the nano-beam scheme, in which the emittance of the colliding beams is 4.6 nm. To achieve such a low emittance, it is vitally important to preserve the emittance during the transport of the beam from the linac to the main ring. One of the most difficult sections is the injection system. Since the dynamic aperture is small for the low emittance, the allowed distances between the stored beam and the injected beam at the injection point are 7.8 mm for the betatron injection and 7.2 mm for the synchrotron injection. The new septum magnets has been constructed and installed in the beam line after the measurement of magnetic flux density and aging test. It has been also checked the septum magnets are capable of design orbit. The initial beam injection succeeded on schedule and they had been operated without any big troubles in the first beam run of Phase-1.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK013
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Construction and Commissioning of Direct Beam Transport Line for PF-AR

2678

N. Higashi, S. Asaoka, K. Furukawa, K. Haga, K. Harada, T. Higo, T. Honda, H. Honma, N. Iida, H. Iwase, K. Kakihara, T. Kamitani, M. Kikuchi, Y. Kishimoto, Y. Kobayashi, K. Kodama, K. Kudo, T. Kume, K. Mikawa, T. Mimashi, F. Miyahara, H. Miyauchi, S. Nagahashi, H. Nakamura, N. Nakamura, T. Natsui, K.N. Nigorikawa, Y. Niwa, T. Nogami, T. Obina, Y. Ogawa, M. Ono, T. Ozaki, H. Sagehashi, T. Sanami, M. Sato, M. Satoh, T. Suwada, M. Tadano, T. Tahara, R. Takai, H. Takaki, S. Takasaki, M. Tanaka, Y. Tanimoto, M. Tawada, N. Toge, T. Uchiyama, A. Ueda, Y. Yamada, M. Yamamoto, M. Yoshida
KEK, Ibaraki, Japan

PF-AR was constructed as an accumulator ring for TRISTAN, and in the KEKB era it has been revitalized as a 6.5 GeV synchrotron radiation source. The injection energy was 3 GeV and the beam was accelerated to 6.5 GeV prior to the user run. The original beam transport line (BT) from the LINAC to the PF-AR shared its upstream part with the the BT line of KEKB High Energy Ring (HER). The injection-mode change from PF-AR to HER or vice versa needs about 10 minutes for the magnet cycling procedure of the shared part. In SuperKEKB, the upgrade of KEKB, the lifetime of HER is about 10 minutes. The mode-switch operation of the BT is, therefore, not allowed for maintaining the highest luminosity of the SuperKEKB. In order to avoid this problem, a new 6.5 GeV BT line dedicated to PF-AR has been constructed. This also enables the top-up injection for the user run. The commissioning of the new BT line has been completed in this March, and now the first user run has been operated successfully.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK006

Cancellation of the Leak Field from Lambertson Septum for the Beam Abort System in the SuperKEKB

2918

N. Iida, M. Kikuchi, K. Kodama, T. Mimashi, T. Mori, Y. Ohnishi, K. Oide, H. Sugimoto, M. Tawada
KEK, Ibaraki, Japan

The first commissioning of SuperKEKB, Phase 1, was performed from February 2016 for five months. A Lambertson septum magnet is utilized to vertically extract the aborted beam, kicked by the horizontal abort kickers upstream into a beam dump. This magnet creates unexpected leak field with a non-negligible skew quadrupole component to the stored beam. Two kinds of skew quadrupole magnets are installed on both sides of the Lambertson septum. One is additional skew windings on the sextupole magnet, and the other is a skew quadrupole magnet with permanent magnets. This paper will report that the cancellations of the leak fields was successful and useful for optics correction.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPIK013

Electron Beam Injection Septum

2943

T. Mori, N. Iida, M. Kikuchi, T. Mimashi, Y. Sakamoto, S. Takasaki, M. Tawada
KEK, Ibaraki, Japan

The SuperKEKB project is in progress toward the initial physics run in autumn 2018. It assumes the nano-beam scheme, in which the emittance of the colliding beams is 4.6 nm. To achieve such a low emittance, it is vitally important to preserve the emittance during the transport of the beam from the linac to the main ring. One of the most difficult sections is the injection system. Since the dynamic aperture is small for the low emittance, the allowed distances between the stored beam and the injected beam at the injection point are 7.8 mm for the betatron injection and 7.2 mm for the synchrotron injection. The new septum magnets has been constructed and installed in the beam line after the measurement of magnetic flux density and aging test. It has been also checked the septum magnets are capable of design orbit. The initial beam injection succeeded on schedule and they had been operated without any big troubles in the first beam run of Phase-1.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPIK013

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)