IPAC2017 - List of Authors (Sunesson, A.)

Paper	Title	Page
MOPIK040	Value Engineering of an Accelerator Design During Construction	592
	E. Bargalló, M. Eshraqi, M. Lindroos, S. Molloy, D.C. Plostinar, A. Sunesson ESS, Lund, Sweden F. Gerigk CERN, Geneva, Switzerland
	Value engineering is an important part of the process of designing and realising large-scale installations such as high power accelerators. This typically occurs during the later part of the design stage of the system, however such exercises may also be requested by funding bodies at later stages in order to manage project contingency. Naturally, the later this is done, the more challenging it becomes. In this paper we report on a recently concluded Value Engineering effort at the European Spallation Source. The challenges presented by the initiation of such an exercise during the construction phase are discussed. In addition, we present and discuss the various options that we examined, and indicate the philosophy and figures of merit used to narrow down these options. The final conclusion will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK040
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK109	The RF Distribution System for the ESS	4352
	T.R. Edgecock, N. Turner University of Huddersfield, Huddersfield, United Kingdom P. Aden, D. Naeem, R. Smith STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom A. Sunesson, R.A. Yogi ESS, Lund, Sweden
	The RF distribution system for the European Spallation Source will be one of the largest systems ever built. It will distribute the power from 146 power sources to the two types of ESS cavity at two different frequencies and will use one line per cavity for resilience. It will consist of a total of around 3.5 km of waveguide and coaxial line and over 1500 hundred bends. It is designed to transport this RF power over a distance of up to 40m per line, while minimising losses, avoiding reflections and allowing the monitoring of performance. This contribution will give an overview of the design of the system and its status. Installation is due to start in September 2017.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK109
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Value Engineering of an Accelerator Design During Construction

592

E. Bargalló, M. Eshraqi, M. Lindroos, S. Molloy, D.C. Plostinar, A. Sunesson
ESS, Lund, Sweden
F. Gerigk
CERN, Geneva, Switzerland

Value engineering is an important part of the process of designing and realising large-scale installations such as high power accelerators. This typically occurs during the later part of the design stage of the system, however such exercises may also be requested by funding bodies at later stages in order to manage project contingency. Naturally, the later this is done, the more challenging it becomes. In this paper we report on a recently concluded Value Engineering effort at the European Spallation Source. The challenges presented by the initiation of such an exercise during the construction phase are discussed. In addition, we present and discuss the various options that we examined, and indicate the philosophy and figures of merit used to narrow down these options. The final conclusion will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK040

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPIK109

The RF Distribution System for the ESS

4352

T.R. Edgecock, N. Turner
University of Huddersfield, Huddersfield, United Kingdom
P. Aden, D. Naeem, R. Smith
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
A. Sunesson, R.A. Yogi
ESS, Lund, Sweden

The RF distribution system for the European Spallation Source will be one of the largest systems ever built. It will distribute the power from 146 power sources to the two types of ESS cavity at two different frequencies and will use one line per cavity for resilience. It will consist of a total of around 3.5 km of waveguide and coaxial line and over 1500 hundred bends. It is designed to transport this RF power over a distance of up to 40m per line, while minimising losses, avoiding reflections and allowing the monitoring of performance. This contribution will give an overview of the design of the system and its status. Installation is due to start in September 2017.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPIK109

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)