IPAC2017 - List of Authors (Plum, M.A.)

Paper	Title	Page
TUPVA147	Progress on the Proton Power Upgrade of the Spallation Neutron Source	2445
	M.S. Champion, R.A. Dean, J. Galambos, M.P. Howell, M.A. Plum, B.W. Riemer ORNL, Oak Ridge, Tennessee, USA
	Funding: Work performed at (or work supported by) Oak Ridge National Laboratory, which is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. The Proton Power Upgrade Project is underway at the Spallation Neutron Source at Oak Ridge National Laboratory and will double the proton beam power capability from 1.4 MW to 2.8 MW to provide increased neutron intensity at the first target station and to support future operation of the second target station. This will be accomplished by increasing the beam energy to 1.3 GeV and the beam current to 38 mA (average during the macro-pulse). Installation of 28 additional superconducting cavities and their associated technical systems will provide for the energy increase. Increased beam loading throughout the accelerator will be accommodated primarily through the use of existing margin in the RF systems and the installation of 700 kW klystrons to power the new superconducting cavities. Upgrades of a few existing RF stations may also be needed. The injection and extraction regions of the accumulator ring will be upgraded, a ring to second target station tunnel stub will be constructed, and a 2 MW target will be developed for the first target station. The project anticipates attainment of Critical Decision 1 in 2017 to ratify the project conceptual design and cost range.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA147
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA037	Injection of a Self-Consistent Beam at the Spallation Neutron Source	4516
	J.A. Holmes, S.M. Cousineau, T.V. Gorlov, M.A. Plum ORNL, Oak Ridge, Tennessee, USA
	Funding: ORNL is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. This research was supported by the DOE Office of Science, Basic Energy Science. We plan to demonstrate the injection of a self-consistent beam into the Spallation Neutron Source (SNS). Self-consistent beams are defined to be ellipsoidal distributions with uniform density and to retain these properties under all linear transformations. Self-consistent distributions may generate very little halo if realized in practice. Some may also be manipulated to generate flat beams. Self-consistent distributions involve very special relationships between the phase space coordinates, making them difficult to realize experimentally. One self-consistent distribution, the 2D rotating distribution, can be painted into the SNS ring, with slight modification of the lattice. However, it is unknown how robust self-consistent distributions will be under real world transport in the presence of nonlinearities and other collective effects. This paper studies these issues and the mitigation of unwanted effects by applying realistic detailed computational models to the simulation of the injection of rotating beams into SNS. The result is a feasible prescription for the injection of a rotating self-consistent distribution into the SNS ring.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA037
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress on the Proton Power Upgrade of the Spallation Neutron Source

2445

M.S. Champion, R.A. Dean, J. Galambos, M.P. Howell, M.A. Plum, B.W. Riemer
ORNL, Oak Ridge, Tennessee, USA

Funding: Work performed at (or work supported by) Oak Ridge National Laboratory, which is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy.
The Proton Power Upgrade Project is underway at the Spallation Neutron Source at Oak Ridge National Laboratory and will double the proton beam power capability from 1.4 MW to 2.8 MW to provide increased neutron intensity at the first target station and to support future operation of the second target station. This will be accomplished by increasing the beam energy to 1.3 GeV and the beam current to 38 mA (average during the macro-pulse). Installation of 28 additional superconducting cavities and their associated technical systems will provide for the energy increase. Increased beam loading throughout the accelerator will be accommodated primarily through the use of existing margin in the RF systems and the installation of 700 kW klystrons to power the new superconducting cavities. Upgrades of a few existing RF stations may also be needed. The injection and extraction regions of the accumulator ring will be upgraded, a ring to second target station tunnel stub will be constructed, and a 2 MW target will be developed for the first target station. The project anticipates attainment of Critical Decision 1 in 2017 to ratify the project conceptual design and cost range.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA147

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA037

Injection of a Self-Consistent Beam at the Spallation Neutron Source

4516

J.A. Holmes, S.M. Cousineau, T.V. Gorlov, M.A. Plum
ORNL, Oak Ridge, Tennessee, USA

Funding: ORNL is managed by UT-Battelle, LLC, under contract DE-AC05-00OR22725 for the U.S. Department of Energy. This research was supported by the DOE Office of Science, Basic Energy Science.
We plan to demonstrate the injection of a self-consistent beam into the Spallation Neutron Source (SNS). Self-consistent beams are defined to be ellipsoidal distributions with uniform density and to retain these properties under all linear transformations. Self-consistent distributions may generate very little halo if realized in practice. Some may also be manipulated to generate flat beams. Self-consistent distributions involve very special relationships between the phase space coordinates, making them difficult to realize experimentally. One self-consistent distribution, the 2D rotating distribution, can be painted into the SNS ring, with slight modification of the lattice. However, it is unknown how robust self-consistent distributions will be under real world transport in the presence of nonlinearities and other collective effects. This paper studies these issues and the mitigation of unwanted effects by applying realistic detailed computational models to the simulation of the injection of rotating beams into SNS. The result is a feasible prescription for the injection of a rotating self-consistent distribution into the SNS ring.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA037

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)