IPAC2017 - List of Authors (Pfingstner, J.)

Paper	Title	Page
TUPIK097	Improving the Performance of an Orbit Feed-forward Based on Quadrupole Motion at the KEK ATF	1931
	D.R. Bett, C. Charrondière, M. Patecki, J. Pfingstner, D. Schulte, R. Tomás CERN, Geneva, Switzerland P. Burrows, G.B. Christian, C. Perry JAI, Oxford, United Kingdom A. Jeremie IN2P3-LAPP, Annecy-le-Vieux, France K. Kubo, S. Kuroda, T. Naito, T. Okugi, T.T. Tauchi, N. Terunuma KEK, Ibaraki, Japan
	The high luminosity requirement for a future linear collider sets a demanding limit on the beam quality at the Interation Point (IP). Even the natural motion of the ground could misalign the quadrupole magnets to such an extent that the resulting dipole kicks would require compensation. The novel technique described in this paper uses seismometers to measure the positions of the quadrupole magnets in real time and a kicker to counteract the effect of their misalignment. The prototype system deployed at the Accelerator Test Facility (ATF) at KEK in Japan has already demonstrated a reduction in the pulse-to-pulse vertical position jitter of the beam by about 10%. Based on the observed correlation of the beam position to the quadrupole positions the maximum possible jitter reduction from such a system is estimated to be about 25%. This paper details the latest improvements made to the system with the aim of achieving this limit.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK097
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK111	IP Feedback Ground Motion Simulation Studies for the ILC	1983
	R.M. Bodenstein, N. Blaskovic Kraljevic, T. Bromwich, P. Burrows, G.B. Christian, C. Perry, R.L. Ramjiawan JAI, Oxford, United Kingdom J. Pfingstner CERN, Geneva, Switzerland
	The International Linear Collider (ILC), as described in its Technical Design Report (TDR), must maintain strict control of its electron and positron beams in order to achieve the desired luminosity at each of its proposed center-of-mass energies. Controlling the beam parameters requires a dynamic system, capable of adjusting to a myriad of perturbations and errors. One of the components used to control the beam is the Interaction Point (IP) feedback system, which is used to dynamically steer the beams back into collision within nanoseconds. This work will show the simulation of the IP Feedback system's compensation for ground motion model K at the ILC.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK111
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPIK077	Impact of Dynamical Stray Fields on CLIC	708
	E. Marín, D. Schulte CERN, Geneva, Switzerland B. Heilig MFGI, Budapest, Hungary J. Pfingstner University of Oslo, Oslo, Norway
	In this paper we estimate the tolerances of stray-fields variations on the Compact Linear Collider (CLIC), discuss possible sources and propose several solutions. The Beam Delivery System (BDS) is the most sensitive system of CLIC to unwanted magnetic field variations, already variations of 1 nT would reduce the luminosity by 10% at wavelengths comparable to the BDS without considering any correction mechanism. Two sources of magnetic field variations are considered, natural and man-made. Precise magnetic field measurements at Earth's surface under a typical geomagnetic storm are presented. Additionally, stray field measurements have been conducted at CERN, to inspect B-field variations due to technical equipment in an accelerator environment. Different solutions are proposed to minimise the impact of stray fields on the CLIC performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK077
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPIK078	Narrow-Band, Wide-Range Tuneable THz Source Based on the Slotted-Foil Technique	712
	J. Pfingstner, E. Adli, H. Holmestad University of Oslo, Oslo, Norway S. Bettoni, S. Reiche PSI, Villigen PSI, Switzerland
	The FEL user community has expressed a strong interest in a THz source for the excitation of their samples in pump probe experiments. The demanded THz properties are challenging to achieve, as they include a narrow bandwidth of <5-10%, the possibility of frequency tuning between 1 and 20 THz, a THz pulse energy of about 100 uJ, and a fixed phase relation from shot-to-shot. To fulfil these specifications, an accelerator-based source is proposed in this paper. It utilises the slotted-foil technique to create a pre-bunched electron beam that is injected into a helical undulator. Detailed simulation studies presented in this paper show that the corresponding undulator radiation has the demanded properties.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK078
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK098	Micrometric Propagation of Error Using Overlapping Streched Wires for the CLIC Pre-Alignment	1935
	H. Mainaud Durand CERN, Geneva, Switzerland J. Pfingstner University of Oslo, Oslo, Norway V. Rude ESGT-CNAM, Le Mans, France
	The geodetic network for the Compact LInear collider (CLIC) will consist of a combination of overlapping wires stretched in parallel and Wire Positioning Sensors (WPS). Such a configuration will limit the propagation of errors (maximum deviation w.r.t. a fit line) below 10 micrometres over 200 metres. These first results were obtained through simulations in 2009, with hypotheses remaining to be validated. New experimental results have been obtained allowing to reconsider the precision and accuracy of WPS sensors and the knowledge of stretched wires. This paper presents the experimental results obtained on dedicated calibration benches and on a facility made of three overlapping stretched wires over a length of 140 metres including WPS sensors measurements. It confirms the possibility to have a propagation of error below 10 micrometres using overlapping stretched wires combined with WPS sensors.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK098
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Improving the Performance of an Orbit Feed-forward Based on Quadrupole Motion at the KEK ATF

1931

D.R. Bett, C. Charrondière, M. Patecki, J. Pfingstner, D. Schulte, R. Tomás
CERN, Geneva, Switzerland
P. Burrows, G.B. Christian, C. Perry
JAI, Oxford, United Kingdom
A. Jeremie
IN2P3-LAPP, Annecy-le-Vieux, France
K. Kubo, S. Kuroda, T. Naito, T. Okugi, T.T. Tauchi, N. Terunuma
KEK, Ibaraki, Japan

The high luminosity requirement for a future linear collider sets a demanding limit on the beam quality at the Interation Point (IP). Even the natural motion of the ground could misalign the quadrupole magnets to such an extent that the resulting dipole kicks would require compensation. The novel technique described in this paper uses seismometers to measure the positions of the quadrupole magnets in real time and a kicker to counteract the effect of their misalignment. The prototype system deployed at the Accelerator Test Facility (ATF) at KEK in Japan has already demonstrated a reduction in the pulse-to-pulse vertical position jitter of the beam by about 10%. Based on the observed correlation of the beam position to the quadrupole positions the maximum possible jitter reduction from such a system is estimated to be about 25%. This paper details the latest improvements made to the system with the aim of achieving this limit.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK097

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK111

IP Feedback Ground Motion Simulation Studies for the ILC

1983

R.M. Bodenstein, N. Blaskovic Kraljevic, T. Bromwich, P. Burrows, G.B. Christian, C. Perry, R.L. Ramjiawan
JAI, Oxford, United Kingdom
J. Pfingstner
CERN, Geneva, Switzerland

The International Linear Collider (ILC), as described in its Technical Design Report (TDR), must maintain strict control of its electron and positron beams in order to achieve the desired luminosity at each of its proposed center-of-mass energies. Controlling the beam parameters requires a dynamic system, capable of adjusting to a myriad of perturbations and errors. One of the components used to control the beam is the Interaction Point (IP) feedback system, which is used to dynamically steer the beams back into collision within nanoseconds. This work will show the simulation of the IP Feedback system's compensation for ground motion model K at the ILC.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK111

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPIK077

Impact of Dynamical Stray Fields on CLIC

708

E. Marín, D. Schulte
CERN, Geneva, Switzerland
B. Heilig
MFGI, Budapest, Hungary
J. Pfingstner
University of Oslo, Oslo, Norway

In this paper we estimate the tolerances of stray-fields variations on the Compact Linear Collider (CLIC), discuss possible sources and propose several solutions. The Beam Delivery System (BDS) is the most sensitive system of CLIC to unwanted magnetic field variations, already variations of 1 nT would reduce the luminosity by 10% at wavelengths comparable to the BDS without considering any correction mechanism. Two sources of magnetic field variations are considered, natural and man-made. Precise magnetic field measurements at Earth's surface under a typical geomagnetic storm are presented. Additionally, stray field measurements have been conducted at CERN, to inspect B-field variations due to technical equipment in an accelerator environment. Different solutions are proposed to minimise the impact of stray fields on the CLIC performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK077

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPIK078

Narrow-Band, Wide-Range Tuneable THz Source Based on the Slotted-Foil Technique

712

J. Pfingstner, E. Adli, H. Holmestad
University of Oslo, Oslo, Norway
S. Bettoni, S. Reiche
PSI, Villigen PSI, Switzerland

The FEL user community has expressed a strong interest in a THz source for the excitation of their samples in pump probe experiments. The demanded THz properties are challenging to achieve, as they include a narrow bandwidth of <5-10%, the possibility of frequency tuning between 1 and 20 THz, a THz pulse energy of about 100 uJ, and a fixed phase relation from shot-to-shot. To fulfil these specifications, an accelerator-based source is proposed in this paper. It utilises the slotted-foil technique to create a pre-bunched electron beam that is injected into a helical undulator. Detailed simulation studies presented in this paper show that the corresponding undulator radiation has the demanded properties.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK078

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK098

Micrometric Propagation of Error Using Overlapping Streched Wires for the CLIC Pre-Alignment

1935

H. Mainaud Durand
CERN, Geneva, Switzerland
J. Pfingstner
University of Oslo, Oslo, Norway
V. Rude
ESGT-CNAM, Le Mans, France

The geodetic network for the Compact LInear collider (CLIC) will consist of a combination of overlapping wires stretched in parallel and Wire Positioning Sensors (WPS). Such a configuration will limit the propagation of errors (maximum deviation w.r.t. a fit line) below 10 micrometres over 200 metres. These first results were obtained through simulations in 2009, with hypotheses remaining to be validated. New experimental results have been obtained allowing to reconsider the precision and accuracy of WPS sensors and the knowledge of stretched wires. This paper presents the experimental results obtained on dedicated calibration benches and on a facility made of three overlapping stretched wires over a length of 140 metres including WPS sensors measurements. It confirms the possibility to have a propagation of error below 10 micrometres using overlapping stretched wires combined with WPS sensors.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK098

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)