IPAC2017 - List of Authors (Meng, F.)

Paper	Title	Page
MOPVA079	A 166.6 MHz Superconducting RF System for the HEPS Storage Ring	1049
	P. Zhang, H.X. Hao, T.M. Huang, Z.Q. Li, H.Y. Lin, F. Meng, Z.H. Mi, Y. Sun, G.W. Wang, Q.Y. Wang, X.Y. Zhang IHEP, Beijing, People's Republic of China
	Funding: This work has been supported by HEPS-TF project and partly by Pioneer 'Hundred Talents Program' of Chinese Academy of Science. A superconducting 166.6 MHz quarter-wave β=1 cavity was recently proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. Four 166.6 MHz cavities will be used for main acceleration in the newly planned on-axis beam injection scheme realized by a double-frequency RF system. The fundamental frequency, 166.6 MHz, was dictated by the fast injection kicker technology and the preference of using 499.8 MHz SC RF cavity as the third harmonic. Each 166.6 MHz cavity will be operated at 4.2 K providing 1.2 MV accelerating voltage and 150 kW of power to the electron beam. The input coupler will use single-window coaxial type graded up to 200 kW CW power. Each cavity will be equipped with a 200 kW solid-state amplifier and digital low-level RF system. This paper will describe the 166.6 MHz RF system with a focus on the design and optimization of the RF cavity and its ancillaries, the LLRF system and the status of the solid-state amplifiers.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA079
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA080	HOM Simulations and Damping Scheme for CEPC Cavities	1052
	H.J. Zheng, J. Gao, F. Meng, P. Sha, J.Y. Zhai IHEP, Beijing, People's Republic of China
	In this paper, it will be presented that the higher order mode (HOM) analysis of the 650 MHz cavities for the Circular Electron-Positron Collider (CEPC). The higher order modes excited by the intense beam bunches must be damped to avoid additional cryogenic loss and multi-bunch instabilities. To keep the beam stable, the impedance budget and the HOM damping requirement are given. The conventional coaxial HOM coupler, which will be mounted on the beam pipe, is planned to extract the HOM power below the cut-off frequency of the beam pipe, and the propagating modes will be absorbed by the two HOM absorbers at room temperature outside the cryomodule.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA080
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A 166.6 MHz Superconducting RF System for the HEPS Storage Ring

1049

P. Zhang, H.X. Hao, T.M. Huang, Z.Q. Li, H.Y. Lin, F. Meng, Z.H. Mi, Y. Sun, G.W. Wang, Q.Y. Wang, X.Y. Zhang
IHEP, Beijing, People's Republic of China

Funding: This work has been supported by HEPS-TF project and partly by Pioneer 'Hundred Talents Program' of Chinese Academy of Science.
A superconducting 166.6 MHz quarter-wave β=1 cavity was recently proposed for the High Energy Photon Source (HEPS), a 6 GeV kilometer-scale light source. Four 166.6 MHz cavities will be used for main acceleration in the newly planned on-axis beam injection scheme realized by a double-frequency RF system. The fundamental frequency, 166.6 MHz, was dictated by the fast injection kicker technology and the preference of using 499.8 MHz SC RF cavity as the third harmonic. Each 166.6 MHz cavity will be operated at 4.2 K providing 1.2 MV accelerating voltage and 150 kW of power to the electron beam. The input coupler will use single-window coaxial type graded up to 200 kW CW power. Each cavity will be equipped with a 200 kW solid-state amplifier and digital low-level RF system. This paper will describe the 166.6 MHz RF system with a focus on the design and optimization of the RF cavity and its ancillaries, the LLRF system and the status of the solid-state amplifiers.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA079

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPVA080

HOM Simulations and Damping Scheme for CEPC Cavities

1052

H.J. Zheng, J. Gao, F. Meng, P. Sha, J.Y. Zhai
IHEP, Beijing, People's Republic of China

In this paper, it will be presented that the higher order mode (HOM) analysis of the 650 MHz cavities for the Circular Electron-Positron Collider (CEPC). The higher order modes excited by the intense beam bunches must be damped to avoid additional cryogenic loss and multi-bunch instabilities. To keep the beam stable, the impedance budget and the HOM damping requirement are given. The conventional coaxial HOM coupler, which will be mounted on the beam pipe, is planned to extract the HOM power below the cut-off frequency of the beam pipe, and the propagating modes will be absorbed by the two HOM absorbers at room temperature outside the cryomodule.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPVA080

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)