IPAC2017 - List of Authors (Jing, C.-J.)

Paper	Title	Page
TUPAB074	Measurements of Thermal Emittance for Cesium Telluride Photocathodes in an L-Band RF Gun	1491
	L.M. Zheng, W. Gai, C.-X. Tang TUB, Beijing, People's Republic of China W. Gai, C.-J. Jing, W. Liu, N.R. Neveu, J.G. Power, J.H. Shao, E.E. Wisniewski ANL, Argonne, Illinois, USA W. Liu Euclid TechLabs, LLC, Solon, Ohio, USA
	The thermal emittance is a major contributor to the final emittance of an electron beam in a photocathode RF gun. In this paper we present measurement results of thermal emittance for the cesium telluride photocathode at the Argonne Wakefield Accelerator (AWA) facility using the quadrupole scan method. Measurements of the thermal emittance vs. the laser spot size are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB132	Research Program and Recent Results at the Argonne Wakefield Accelerator Facility (AWA)	2885
	M.E. Conde, S.P. Antipov, D.S. Doran, W. Gai, Q. Gao, G. Ha, C.-J. Jing, W. Liu, N.R. Neveu, J.G. Power, J.Q. Qiu, J.H. Shao, Y.R. Wang, C. Whiteford, E.E. Wisniewski, L.M. Zheng ANL, Argonne, Illinois, USA S.P. Antipov, C.-J. Jing, J.Q. Qiu Euclid TechLabs, LLC, Solon, Ohio, USA Q. Gao, L.M. Zheng TUB, Beijing, People's Republic of China G. Ha POSTECH, Pohang, Kyungbuk, Republic of Korea N.R. Neveu IIT, Chicago, Illinois, USA Y.R. Wang IMP/CAS, Lanzhou, People's Republic of China
	Funding: Work supported by the U.S. Department of Energy under contract No. DE-AC02-06CH11357 We give an overview of the research program at the Argonne Wakefield Accelerator Facility (AWA), including some highlights of recent experiments. The AWA facility is dedicated to the study of beam physics and the development of technology for future particle accelerators. Two independent electron linacs are used to study wakefield acceleration: 70 MeV high charge electron bunches of up to 100 nC are used to drive wakefields, which can be probed by bunches originating from the same linac or from the 15 MeV linac. Recent Two-Beam-Acceleration (TBA) experiments operating at 11.7 GHz reached accelerating gradients of up to 150 MV/m. No indication of witness beam quality degradation was observed, and bunch charge was preserved during the acceleration process. Two identical TBA setups were used in series in order to demonstrate staging capabilities. Dielectric loaded structures operating at 26 GHz are also used in TBA experiments. Another main thrust of the research program consists of exploring and developing techniques to manipulate the phase space of electron bunches. These efforts include bunch shaping and the exchange of emittances in the transverse and the longitudinal phase spaces
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB132
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA022	RECENT TWO-BEAM ACCELERATION ACTIVITIES AT ARGONNE WAKEFIELD ACCELERATOR FACILITY	3305
	J.H. Shao, S.P. Antipov, M.E. Conde, W. Gai, Q. Gao, G. Ha, W. Liu, N.R. Neveu, J.G. Power, Y.R. Wang, E.E. Wisniewski, L.M. Zheng ANL, Argonne, Illinois, USA C.-J. Jing, J.Q. Qiu Euclid TechLabs, LLC, Solon, Ohio, USA J. Shi, D. Wang TUB, Beijing, People's Republic of China
	The Two-Beam Acceleration (TBA) is a modified approach to the structure-based wakefield acceleration which may meet the luminosity, efficiency, and cost requirement of a future linear collider. Recently, various TBA experiments have been carried out at the Argonne Wakefield Accelerator Facility (AWA). With X-band metallic power extractors and accelerators, a 70 MeV/m average accelerating gradient has been demonstrated in two stages while a 150 MeV/m gradient as well as 300 MW extracted power have been achieved in a single stage. In addition, low cost K-band dielectric power extractor and accelerator have also been developed. The preliminary results show power extraction of 55 MW and an average accelerating gradient of 28 MeV/m.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA148	Inexpensive Brazeless RF Accelerator	4812
	S.P. Antipov, C.-J. Jing, R.A. Kostin, S.V. Kuzikov, J.Q. Qiu Euclid TechLabs, LLC, Solon, Ohio, USA A.A. Vikharev IAP/RAS, Nizhny Novgorod, Russia
	Funding: DOE SBIR A simple, inexpensive way to manufacture a standard radio frequency (RF) driven particle accelerator is presented. The simplification comes from two innovations: utilization of LCLS gun - type RF design to avoid an expensive brazing process and copper plating of stainless steel that further reduces manufacturing cost. This is realized by a special structure design where accelerating structure cells are made out of copper plated stainless steel with knife edges and structure irises - copper disks acts also as gaskets for vacuum and RF seal. Besides the reduced cost, brazeless assembly allows integration of effective cooling and magnet optics elements into accelerator cells.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA148
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Measurements of Thermal Emittance for Cesium Telluride Photocathodes in an L-Band RF Gun

1491

L.M. Zheng, W. Gai, C.-X. Tang
TUB, Beijing, People's Republic of China
W. Gai, C.-J. Jing, W. Liu, N.R. Neveu, J.G. Power, J.H. Shao, E.E. Wisniewski
ANL, Argonne, Illinois, USA
W. Liu
Euclid TechLabs, LLC, Solon, Ohio, USA

The thermal emittance is a major contributor to the final emittance of an electron beam in a photocathode RF gun. In this paper we present measurement results of thermal emittance for the cesium telluride photocathode at the Argonne Wakefield Accelerator (AWA) facility using the quadrupole scan method. Measurements of the thermal emittance vs. the laser spot size are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPAB074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB132

Research Program and Recent Results at the Argonne Wakefield Accelerator Facility (AWA)

2885

M.E. Conde, S.P. Antipov, D.S. Doran, W. Gai, Q. Gao, G. Ha, C.-J. Jing, W. Liu, N.R. Neveu, J.G. Power, J.Q. Qiu, J.H. Shao, Y.R. Wang, C. Whiteford, E.E. Wisniewski, L.M. Zheng
ANL, Argonne, Illinois, USA
S.P. Antipov, C.-J. Jing, J.Q. Qiu
Euclid TechLabs, LLC, Solon, Ohio, USA
Q. Gao, L.M. Zheng
TUB, Beijing, People's Republic of China
G. Ha
POSTECH, Pohang, Kyungbuk, Republic of Korea
N.R. Neveu
IIT, Chicago, Illinois, USA
Y.R. Wang
IMP/CAS, Lanzhou, People's Republic of China

Funding: Work supported by the U.S. Department of Energy under contract No. DE-AC02-06CH11357
We give an overview of the research program at the Argonne Wakefield Accelerator Facility (AWA), including some highlights of recent experiments. The AWA facility is dedicated to the study of beam physics and the development of technology for future particle accelerators. Two independent electron linacs are used to study wakefield acceleration: 70 MeV high charge electron bunches of up to 100 nC are used to drive wakefields, which can be probed by bunches originating from the same linac or from the 15 MeV linac. Recent Two-Beam-Acceleration (TBA) experiments operating at 11.7 GHz reached accelerating gradients of up to 150 MV/m. No indication of witness beam quality degradation was observed, and bunch charge was preserved during the acceleration process. Two identical TBA setups were used in series in order to demonstrate staging capabilities. Dielectric loaded structures operating at 26 GHz are also used in TBA experiments. Another main thrust of the research program consists of exploring and developing techniques to manipulate the phase space of electron bunches. These efforts include bunch shaping and the exchange of emittances in the transverse and the longitudinal phase spaces

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPAB132

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA022

RECENT TWO-BEAM ACCELERATION ACTIVITIES AT ARGONNE WAKEFIELD ACCELERATOR FACILITY

3305

J.H. Shao, S.P. Antipov, M.E. Conde, W. Gai, Q. Gao, G. Ha, W. Liu, N.R. Neveu, J.G. Power, Y.R. Wang, E.E. Wisniewski, L.M. Zheng
ANL, Argonne, Illinois, USA
C.-J. Jing, J.Q. Qiu
Euclid TechLabs, LLC, Solon, Ohio, USA
J. Shi, D. Wang
TUB, Beijing, People's Republic of China

The Two-Beam Acceleration (TBA) is a modified approach to the structure-based wakefield acceleration which may meet the luminosity, efficiency, and cost requirement of a future linear collider. Recently, various TBA experiments have been carried out at the Argonne Wakefield Accelerator Facility (AWA). With X-band metallic power extractors and accelerators, a 70 MeV/m average accelerating gradient has been demonstrated in two stages while a 150 MeV/m gradient as well as 300 MW extracted power have been achieved in a single stage. In addition, low cost K-band dielectric power extractor and accelerator have also been developed. The preliminary results show power extraction of 55 MW and an average accelerating gradient of 28 MeV/m.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPVA148

Inexpensive Brazeless RF Accelerator

4812

S.P. Antipov, C.-J. Jing, R.A. Kostin, S.V. Kuzikov, J.Q. Qiu
Euclid TechLabs, LLC, Solon, Ohio, USA
A.A. Vikharev
IAP/RAS, Nizhny Novgorod, Russia

Funding: DOE SBIR
A simple, inexpensive way to manufacture a standard radio frequency (RF) driven particle accelerator is presented. The simplification comes from two innovations: utilization of LCLS gun - type RF design to avoid an expensive brazing process and copper plating of stainless steel that further reduces manufacturing cost. This is realized by a special structure design where accelerating structure cells are made out of copper plated stainless steel with knife edges and structure irises - copper disks acts also as gaskets for vacuum and RF seal. Besides the reduced cost, brazeless assembly allows integration of effective cooling and magnet optics elements into accelerator cells.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPVA148

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)