IPAC2017 - List of Authors (Hostettler, M.)

Paper	Title	Page
MOPAB110	Comparison of Transverse Emittance Measurements in the LHC	377
	M. Hostettler, R. Alemany-Fernández, F. Alessio, M. Ferro-Luzzi, K. Fuchsberger, G. Iadarola, R. Matev, S. Papadopoulou, Y. Papaphilippou, G. Papotti, G. Trad CERN, Geneva, Switzerland F. Antoniou The University of Liverpool, Liverpool, United Kingdom G.R. Coombs University of Glasgow, Glasgow, United Kingdom T.B. Hadavizadeh Oxford University, Physics Department, Oxford, Oxon, United Kingdom
	Transverse emittance measurement in a collider is of crucial importance for understanding beam dynamics observations and evaluating the machine performance. Devices measuring the beam emittance face the challenge of dealing with considerable systematic errors that can compromise the quality of the measurement. Having different instruments or techniques that provide beam size estimations in order to compare the outcome and give an unbiased value of the emittance is very important in a collider. The comparison of the different results is as well very useful to identify possible problems in a given equipment which could remain unnoticed if such device is the only source of emittance reconstruction. In the LHC several of these instruments and techniques are available; wire scanners, synchrotron light monitors, emittance reconstruction from transverse convolved beam sizes extracted from luminosity scans at the LHC collision points and from beam-gas imaging in the vertex detector of the LHCb experiment. Those systems are briefly presented in this paper together with the comparison of the emittances reconstructed by each of them during physics production over the 2016 LHC run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB110
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB130	Cross-Calibration of the LHC Transverse Beam-Profile Monitors	437
	R. Alemany-Fernández, F. Alessio, A. Alexopoulos, C. Barschel, F.S. Carlier, J.M. Coello de Portugal, M. Ferro-Luzzi, A. Garcia-Tabares, M. Hostettler, O. Karacheban, E.H. Maclean, R. Matev, T. Persson, P.K. Skowroński, R. Tomás, G. Trad, S. Vlachos, B. Würkner CERN, Geneva, Switzerland G.R. Coombs EPFL, Lausanne, Switzerland T.B. Hadavizadeh Oxford University, Physics Department, Oxford, Oxon, United Kingdom M. Hofer TU Vienna, Wien, Austria L. van Riesen-Haupt University of Oxford, Oxford, United Kingdom
	Calibration of a transverse beam profile monitor is of fundamental importance to guarantee the best possible accuracy and reliability of the instrument over time. In LHC the calibration standard for transverse-profile measurements are the wire scanners. Other profile monitors such as beam synchrotron light telescopes and interferometers are calibrated with respect to them. Additional information about single-bunch sizes can be obtained from beam-gas imaging in the LHCb vertex detector, from the transverse convolved beam sizes extracted from luminosity scans at the collision points, and from the evolution of the luminous-region parameters as reconstructed by ATLAS and CMS inner tracker detectors during such scans. For the first time in LHC, a dedicated cross-calibration of all the above-mentioned systems was carried out with beam in 2016. Additionally, dedicated optics measurements were also performed in order to determine with the highest possible accuracy the amplitude function at the interaction points and at the position of the profile monitors. Results of these measurements are presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB130
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK087	Phase Advance Interlocking Throughout the Whole LHC Cycle	1901
	K. Fuchsberger, A. Calia, M.A. Galilée, G.H. Hemelsoet, M. Hostettler, D. Jacquet, J. Makai, M. Schaumann CERN, Geneva, Switzerland
	Each beam of CERN's Large Hadron Collider (LHC) stores 360 MJ at design energy and design intensity. In the unlikely event of an asynchronous beam dump, not all particles would be extracted immediately. They would still take one turn around the ring, oscillating with potentially high amplitudes. In case the beam would hit one of the experimental detectors or the collimators close to the interaction points, severe damage could occur. In order to minimize the risk during such a scenario, a new interlock system was put in place in 2016. This system guarantees a phase advance of zero degrees (within tolerances) between the extraction kicker and the interaction point. This contribution describes the motivation for this new system as well as the technical implementation and the strategies used to derive appropriate tolerances to allow sufficient protection without risking false beam dump triggers.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK087
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA044	Modelling and Measurements of Bunch Profiles at the LHC	2167
	S. Papadopoulou, F. Antoniou, T. Argyropoulos, M. Hostettler, Y. Papaphilippou CERN, Geneva, Switzerland M. Fitterer Fermilab, Batavia, Illinois, USA
	The bunch profiles in the LHC are often observed to be non-Gaussian, both at Flat Bottom (FB) and Flat Top (FT) energies. Especially at FT, an evolution of the tail population in time is observed. In this respect, the Monte-Carlo Software for IBS and Radiation effects (SIRE) is used to track different types of beam distributions. The impact of the distribution shape on the evolution of bunch characteristics is studied. The results are compared with observations from the LHC Run 2 data.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA044
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB042	Long-Range Beam-Beam Orbit Effects in LHC, Simulations and Observations From Machine Operation in 2016	3799
	A.A. Gorzawski, K. Fuchsberger, M. Hostettler, T. Pieloni, J. Wenninger CERN, Geneva, Switzerland
	To limit the number of head on collisions to only one at the interaction point in the Large Hadron Collider (LHC), two beams are colliding with a non zero crossing angle. Under the presence of such angle the closed orbits of the individual bunches in the bunch train varies due to the long-range beam-beam effects. These variations leave a signature as a non zero transverse offset at the collision points visible in the front and trail of the bunch train. When operation team aims for the optimised beam orbit and therefore maximised luminosity, those front and tail bunches due to the overall offset experience reduced luminosity. This paper describes an overview of the existing tool for simulating these effects and compares to operational data. The effects of different operational scenarios (i.e. beam brightness, reduced or asymmetric crossing angles between the interaction points etc.) are simulated and discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB042
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB109	Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation	374
	M. Hostettler LHEP, Bern, Switzerland K. Fuchsberger, G. Papotti CERN, Geneva, Switzerland
	Luminosity scans were regularly performed at the CERN Large Hadron Collider (LHC) as of 2015 as a complementary method for measuring the beam size. The CMS experiment provides bunch-by-bunch luminosities at sufficient rates to allow evaluation of bunch-by-bunch beam sizes, and the scans are performed in the horizontal and vertical plane separately. Closed orbit differences between bunches can also be derived by this analysis. During 2016 LHC operation, these scans were also done in an automated manner on a regular basis, and the analysis was improved to significantly reduce the systematic uncertainty, especially in the crossing plane. This contribution first highlights the recent improvements to the analysis and elaborates on their impact. The measured beam sizes during 2016 proton physics operation are then shown and compared to measurements from synchrotron light telescopes and estimates based on the absolute luminosities of the LHC experiments.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB109
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA005	Impact of the Crossing Angle on Luminosity Asymmetries at the LHC in 2016 Proton Physics Operation	2035
SUSPSIK001	use link to see paper's listing under its alternate paper code
	M. Hostettler LHEP, Bern, Switzerland F. Antoniou, I. Efthymiopoulos, K. Fuchsberger, G. Iadarola, N. Karastathis, M. Lamont, Y. Papaphilippou, G. Papotti, J. Wenninger CERN, Geneva, Switzerland
	During 2016 proton physics operation at the CERN Large Hadron Collider (LHC), an asymmetry of up to 10% was observed between the luminosities measured by the ATLAS and CMS experiments. As the same bunch pairs collide in both experiments, a difference in luminosities must be of either geometric or instrumental origin. This paper quantifies the impact of the crossing angle on this asymmetry. As the beams cross in different planes in the two experiments, non-round beams are expected to yield an asymmetry due to the crossing angle. Results from crossing angle measurements at both experiments are also shown and the impact on the luminosities is evaluated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Comparison of Transverse Emittance Measurements in the LHC

377

M. Hostettler, R. Alemany-Fernández, F. Alessio, M. Ferro-Luzzi, K. Fuchsberger, G. Iadarola, R. Matev, S. Papadopoulou, Y. Papaphilippou, G. Papotti, G. Trad
CERN, Geneva, Switzerland
F. Antoniou
The University of Liverpool, Liverpool, United Kingdom
G.R. Coombs
University of Glasgow, Glasgow, United Kingdom
T.B. Hadavizadeh
Oxford University, Physics Department, Oxford, Oxon, United Kingdom

Transverse emittance measurement in a collider is of crucial importance for understanding beam dynamics observations and evaluating the machine performance. Devices measuring the beam emittance face the challenge of dealing with considerable systematic errors that can compromise the quality of the measurement. Having different instruments or techniques that provide beam size estimations in order to compare the outcome and give an unbiased value of the emittance is very important in a collider. The comparison of the different results is as well very useful to identify possible problems in a given equipment which could remain unnoticed if such device is the only source of emittance reconstruction. In the LHC several of these instruments and techniques are available; wire scanners, synchrotron light monitors, emittance reconstruction from transverse convolved beam sizes extracted from luminosity scans at the LHC collision points and from beam-gas imaging in the vertex detector of the LHCb experiment. Those systems are briefly presented in this paper together with the comparison of the emittances reconstructed by each of them during physics production over the 2016 LHC run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB110

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB130

Cross-Calibration of the LHC Transverse Beam-Profile Monitors

437

R. Alemany-Fernández, F. Alessio, A. Alexopoulos, C. Barschel, F.S. Carlier, J.M. Coello de Portugal, M. Ferro-Luzzi, A. Garcia-Tabares, M. Hostettler, O. Karacheban, E.H. Maclean, R. Matev, T. Persson, P.K. Skowroński, R. Tomás, G. Trad, S. Vlachos, B. Würkner
CERN, Geneva, Switzerland
G.R. Coombs
EPFL, Lausanne, Switzerland
T.B. Hadavizadeh
Oxford University, Physics Department, Oxford, Oxon, United Kingdom
M. Hofer
TU Vienna, Wien, Austria
L. van Riesen-Haupt
University of Oxford, Oxford, United Kingdom

Calibration of a transverse beam profile monitor is of fundamental importance to guarantee the best possible accuracy and reliability of the instrument over time. In LHC the calibration standard for transverse-profile measurements are the wire scanners. Other profile monitors such as beam synchrotron light telescopes and interferometers are calibrated with respect to them. Additional information about single-bunch sizes can be obtained from beam-gas imaging in the LHCb vertex detector, from the transverse convolved beam sizes extracted from luminosity scans at the collision points, and from the evolution of the luminous-region parameters as reconstructed by ATLAS and CMS inner tracker detectors during such scans. For the first time in LHC, a dedicated cross-calibration of all the above-mentioned systems was carried out with beam in 2016. Additionally, dedicated optics measurements were also performed in order to determine with the highest possible accuracy the amplitude function at the interaction points and at the position of the profile monitors. Results of these measurements are presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB130

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK087

Phase Advance Interlocking Throughout the Whole LHC Cycle

1901

K. Fuchsberger, A. Calia, M.A. Galilée, G.H. Hemelsoet, M. Hostettler, D. Jacquet, J. Makai, M. Schaumann
CERN, Geneva, Switzerland

Each beam of CERN's Large Hadron Collider (LHC) stores 360 MJ at design energy and design intensity. In the unlikely event of an asynchronous beam dump, not all particles would be extracted immediately. They would still take one turn around the ring, oscillating with potentially high amplitudes. In case the beam would hit one of the experimental detectors or the collimators close to the interaction points, severe damage could occur. In order to minimize the risk during such a scenario, a new interlock system was put in place in 2016. This system guarantees a phase advance of zero degrees (within tolerances) between the extraction kicker and the interaction point. This contribution describes the motivation for this new system as well as the technical implementation and the strategies used to derive appropriate tolerances to allow sufficient protection without risking false beam dump triggers.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK087

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA044

Modelling and Measurements of Bunch Profiles at the LHC

2167

S. Papadopoulou, F. Antoniou, T. Argyropoulos, M. Hostettler, Y. Papaphilippou
CERN, Geneva, Switzerland
M. Fitterer
Fermilab, Batavia, Illinois, USA

The bunch profiles in the LHC are often observed to be non-Gaussian, both at Flat Bottom (FB) and Flat Top (FT) energies. Especially at FT, an evolution of the tail population in time is observed. In this respect, the Monte-Carlo Software for IBS and Radiation effects (SIRE) is used to track different types of beam distributions. The impact of the distribution shape on the evolution of bunch characteristics is studied. The results are compared with observations from the LHC Run 2 data.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA044

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB042

Long-Range Beam-Beam Orbit Effects in LHC, Simulations and Observations From Machine Operation in 2016

3799

A.A. Gorzawski, K. Fuchsberger, M. Hostettler, T. Pieloni, J. Wenninger
CERN, Geneva, Switzerland

To limit the number of head on collisions to only one at the interaction point in the Large Hadron Collider (LHC), two beams are colliding with a non zero crossing angle. Under the presence of such angle the closed orbits of the individual bunches in the bunch train varies due to the long-range beam-beam effects. These variations leave a signature as a non zero transverse offset at the collision points visible in the front and trail of the bunch train. When operation team aims for the optimised beam orbit and therefore maximised luminosity, those front and tail bunches due to the overall offset experience reduced luminosity. This paper describes an overview of the existing tool for simulating these effects and compares to operational data. The effects of different operational scenarios (i.e. beam brightness, reduced or asymmetric crossing angles between the interaction points etc.) are simulated and discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THPAB042

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB109

Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation

374

M. Hostettler
LHEP, Bern, Switzerland
K. Fuchsberger, G. Papotti
CERN, Geneva, Switzerland

Luminosity scans were regularly performed at the CERN Large Hadron Collider (LHC) as of 2015 as a complementary method for measuring the beam size. The CMS experiment provides bunch-by-bunch luminosities at sufficient rates to allow evaluation of bunch-by-bunch beam sizes, and the scans are performed in the horizontal and vertical plane separately. Closed orbit differences between bunches can also be derived by this analysis. During 2016 LHC operation, these scans were also done in an automated manner on a regular basis, and the analysis was improved to significantly reduce the systematic uncertainty, especially in the crossing plane. This contribution first highlights the recent improvements to the analysis and elaborates on their impact. The measured beam sizes during 2016 proton physics operation are then shown and compared to measurements from synchrotron light telescopes and estimates based on the absolute luminosities of the LHC experiments.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPAB109

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPVA005

Impact of the Crossing Angle on Luminosity Asymmetries at the LHC in 2016 Proton Physics Operation

2035

SUSPSIK001

use link to see paper's listing under its alternate paper code

M. Hostettler
LHEP, Bern, Switzerland
F. Antoniou, I. Efthymiopoulos, K. Fuchsberger, G. Iadarola, N. Karastathis, M. Lamont, Y. Papaphilippou, G. Papotti, J. Wenninger
CERN, Geneva, Switzerland

During 2016 proton physics operation at the CERN Large Hadron Collider (LHC), an asymmetry of up to 10% was observed between the luminosities measured by the ATLAS and CMS experiments. As the same bunch pairs collide in both experiments, a difference in luminosities must be of either geometric or instrumental origin. This paper quantifies the impact of the crossing angle on this asymmetry. As the beams cross in different planes in the two experiments, non-round beams are expected to yield an asymmetry due to the crossing angle. Results from crossing angle measurements at both experiments are also shown and the impact on the luminosities is evaluated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPVA005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)