| Paper | Title | Page |
|---|---|---|
| MOPCH136 | China Spallation Neutron Source Accelerators: Design, Research, and Development | 366 |
|
||
| The Beijing Spallation Neutron Source (BSNS) is a newly approved high power accelerator project based on a H- linear accelerator and a rapid cycling synchrotron. During the past year, several major revisions were made to the design including the type of the front end, linac frequency, transport layout, ring lattice, and type of ring components. Possible upgrade paths were also laid out: based on an extension of the warm linac, the ring injection energy and the beam current could be raised doubling the beam power on target to reach 200 kW; an extension with a superconducting RF linac of similar length could raise the beam power near 0.5 MW. Based on these considerations, research and development activities are started. In this paper, we discuss the rationale of design revisions and summarize the recent work. | ||
| MOPCH137 | An Anti-symmetric Lattice for High Intensity Rapid-cycling Synchrotrons | 369 |
|
||
| Rapid cycling synchrotrons are used in many high power facilities like spallation neutron sources and proton drivers. In such accelerators, beam collimation plays a crucial role in reducing the uncontrolled beam loss. Furthermore, the injection and extraction section needs to reside in dispersion-free region to avoid couplings; a significant amount of drift space is needed to house the RF accelerating cavities; orbit, tune, and chromatic corrections are needed; long, uninterrupted straights are desired to ease injection tuning and to raise collimation efficiency. Finally, the machine circumference needs to be small to reduce construction costs. In this paper, we present a lattice designed to satisfy these needs. The lattice contains a drift created by a missing dipole near the peak dispersion to facilitate longitudinal collimation. The compact FODO arc allows easy orbit, tune, coupling, and chromatic correction. The doublet straight provides long uninterrupted straights. The four-fold lattice symmetry separates injection, extraction, and collimation to different straights. This lattice is chosen for the Beijing Spallation Neutron Source synchrotron. | ||
| MOPLS021 | Beam Pipe Desorption Rate in RHIC | 583 |
|
||
| Increase of beam intensity in RHIC has caused several decades of pressure rises in the warm sections during operation. This has been a major factor limiting the RHIC luminosity. About 250 meters of NEG coated beam pipes have been installed in many warm sections to ameliorate this problem. Beam ion induced desorption is one possible cause of pressure rises. A series beam studies in RHIC has been dedicated to estimate the desorption rate of various beam pipes (regular and NEG coated) at various warm sections. Correctors were used to generate local beam losses and consequently local pressure rises. The experiment results are presented and analyzed in this paper. | ||
| TUPLS115 | Transverse Phase Space Painting for the CSNS Injection | 1774 |
|
||
| The CSNS accelerators consist of an 80 MeV proton Linac, and a 1.6 GeV rapid cycling synchrotron (RCS). The ring accumulates 1.88*1013 protons via H－stripping injection in the phase CSNS-I. The injected beam is painted into the large transverse phase space to alleviate space-charge effects. The uniformity of beam emittance is important in reducing the tune shift/spread due to space charge effect. The paper introduces two parameters to evaluate the uniformity of a distribution. To satisfy the low-loss design criteria, extensive comparison of different painting scenarios has been carried out by using the simulation code ORBIT. This paper gives detailed studies on painting schemes and the dependence on the lattice tune, the injection peak current, and also chopping rate. | ||
| TUPLS116 | Extraction System Design for the CSNS/RCS | 1777 |
|
||
| The CSNS extraction system takes use one of the four dispersion-free straight sections. Five vertical kickers and one Lambertson septum magnet are used for the one-turn extraction. The rise time of less 250 ns and the total kicking angle of 20 mrad are required for the kickers that are grouped into two tanks. The design for the kicker magnets and the PFN is also given. To reduce the low beam loss in the extraction channels due to large halo emittance, large apertures are used for both the kickers and septum. Stray magnetic field inside and at the two ends of the circulating path of the Lambertson magnet and its effect to the beam has been studied. | ||
| TUPLS117 | Beam Transport Lines for the CSNS | 1780 |
|
||
| This paper presents the design of two beam transport lines at the CSNS: one is the injection line from the linac to the RCS and the other is the target line from the RCS to the target station. In the injection beam line, space charge effects, transverse halo collimation, momentum tail collimation and debunching are the main concerned topics. A new method of using triplet cells and stripping foils is used to collimate transverse halo. A long straight section is reserved for the future upgrading linac and debuncher. In the target beam line, large halo emittance, beam stability at the target due to kicker failures and beam jitters, shielding of back-scattering neutrons from the target are main concerned topics. Special bi-gap magnets will be used to reduce beam losses in the collimators in front of the target. | ||
| WEPCH033 | Single Particle Beam Dynamics Design of CSNS/RCS | 1996 |
|
||
| Rapid Cycling Synchrotron (RCS) is a key component of Beijing Spallation Neutron Source (BSNS). It accumulates and accelerates protons to design energy of 1.6 GeV and extracts high energy beam to the target. As a high beam density and high beam power machine, low beam loss is also a basic requirement. An optimal lattice design is essential for the cost and the future operation. The lattice design of BSNS is presented, and the related dynamics issues are discussed. The injection/extraction scheme and the beam collimation system design are introduced. | ||
| WEPCH065 | Lattices for High-power Proton Beam Acceleration and Secondary Beam Collection, Cooling, and Deceleration | 2074 |
|
||
| Rapid-cycling synchrotrons are used to accelerate high-intensity proton beams to energies of tens of GeV for secondary beam production. After primary beam collision with a target, the secondary beam can be collected, cooled, accelerated or decelerated by ancillary synchrotrons for various applications. In this paper, we first present a lattice for the main synchrotron. This lattice has: a) flexible momentum compaction to avoid transition and to facilitate RF gymnastics b) long straight sections for low-loss injection, extraction, and high-efficiency collimation c) dispersion-free straights to avoid longitudinal-transverse coupling, and d) momentum cleaning at locations of large dispersion with missing dipoles. Then, we present a lattice for a cooler ring for the secondary beam. The momentum compaction across half of this ring is near zero, while for the other half it is normal. Thus, bad mixing is minimized while good mixing is maintained for stochastic beam cooling. | ||
| THPCH028 | Crystalline Beams at High Energies | 2841 |
|
||
|
Previously it was shown that by crystallizing each of the two counter-circulating beams, a much larger beam-beam tune shift can be tolerated during the beam-beam collisions; thus a higher luminosity can be reached for colliding beams*. On the other hand, crystalline beams can only be formed at energies below the transition energy of the circular accelerators**. In this paper, we investigate the formation of crystals in two types of high-transition-energy lattices, one realized by three-cell missing dipole modules and the other with negative bends. The latter type satisfies the maintenance condition for a crystalline beam***.
*J. Wei and A.M. Sessler, “Colliding crystalline beams”, EPAC98, p. 862. **J. Wei et al. Physical Review Letters, 73 (1994) p. 3089.***J. Wei et al. Physical Review Letters, 80 (1998) p. 2606. |
||
| MOPLS025 | Experience in Reducing Electron Cloud and Dynamic Pressure Rise in Warm and Cold Regions in RHIC | 595 |
|
||
| Significant improvement has been achieved for reducing electron cloud and dynamic pressure rise at RHIC over several years; however, there remain to be factors limiting luminosity. The large scale application of non-evaporable getter (NEG) coating in RHIC has been proven effective in reducing electron multipacting and dynamic pressure rise. This will be reported together with the study of the saturated NEG coatings. Since beams with increased intensity and shorter bunch spacing became possible in operation, the electron cloud effects on beam, such as the emittance growth,are an increasing concern. Observations and studies are reported. We also report the study results relevant to the RHIC electron cloud and pressure rise improvement, such as the effect of anti-grazing ridges on electron cloud in warm sections, and the effect of pre-pumping in cryogenic regions. | ||
| TUPLS118 | Injection System Design for the CSNS/RCS | 1783 |
|
||
| The CSNS injection system is designed to take one uninterrupted long drift in one of the four dispersion-free straight sections to host all the injection devices. Painting bumper magnets are used for both horizontal and vertical phase space painting. Closed-orbit bumper magnets are used for facilitating the installation of the injection septa and decreasing proton traversal in the stripping foil. Even with large beam emittance of about 300 pmm.mrad used, BSNS/RCS still approaches the space charge limit during the injection/trapping phase for the accumulated particles of 1.9*1013 and at the low injection energy of 80 MeV. Uniform-like beam distribution by well-designed painting scheme is then obtained to decrease the tune shift/spread. ORBIT code is used for the 3D simulations. Upgrading to higher injection energy has also been considered. | ||
| TUPLS140 | An Overview of the SNS Accelerator Mechanical Engineering | 1831 |
|
||
| The Spallation Neutron Source (SNS) is an accelerator-based neutron source currently nearing completion at Oak Ridge National Laboratory. When completed in 2006, the SNS will provide a 1GeV, 1.44MW proton beam to a liquid mercury target for neutron production. SNS is a collaborative effort between six U.S. Department of Energy national laboratories and offered a unique opportunity for the mechanical engineers to work with their peers from across the country. This paper presents an overview of the overall success of the collaboration concentrating on the accelerator ring mechanical engineering along with some discussion regarding the relative merits of such a collaborative approach. Also presented are a status of the mechanical engineering installation and a review of the associated installation costs. | ||
| WEPCH141 | Accelerator Physics Code Web Repository | 2254 |
|
||
| In the framework of the CARE HHH European Network, we have developed a web-based dynamic accelerator-physics code repository. We describe the design, structure and contents of this web repository, illustrate its usage, and discuss our future plans. |