FEL2014 - List of Authors (Krasilnikov, M.)

Paper	Title	Page
MOP055	Start-to-End Simulations for IR/THz Undulator Radiation at PITZ	153
	P. Boonpornprasert, M. Khojoyan, M. Krasilnikov, F. Stephan DESY Zeuthen, Zeuthen, Germany B. Marchetti, E. Schneidmiller, M.V. Yurkov DESY, Hamburg, Germany S. Rimjaem Chiang Mai University, Chiang Mai, Thailand
	High brightness electron sources for modern linac-based Free-Electron Lasers (FELs) have been characterized and optimized at the Photo Injector Test facility at DESY, Zeuthen site (PITZ). Since the time structure of the electron bunches at PITZ is identical to those at the European XFEL, the PITZ accelerator is being considered as a proper machine for the development of an IR/THz source prototype for pump and probe experiments planned at the European XFEL. Tunable IR/THz radiation sources using synchrotron radiation from a dipole magnet, transition radiation, high gain FELs and coherent radiation of tailored or premodulated beams are currently under consideration. This work describes start-to-end simulations for generating the FEL radiation using an APPLE-II undulator with electron beams produced by the PITZ accelerator. Analysis of the physical parameter space has been performed with tools of the FAST program code package. Electron Beam dynamics simulations were performed by using the ASTRA code, while the GENESIS 1.3 code was used to study the SASE process. The results of these studies are presented and discussed in this paper.

THP006	Optimization of the PITZ Photo Injector Towards the Best Achievable Beam Quality	685
	M. Khojoyan, M. Krasilnikov, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany
	Funding: The work is supported by the German Federal Ministry of education and Research, project 05K10CHE and RFBR grant 13-02-91323. Uniform 3D ellipsoids are proven to be the best distributions for high brightness charged particle beam applications due to the linear dependence of the space charge fields on the position within the distribution. Such electron bunches have lower emittance and are less sensitive to the machine settings and, therefore, should allow more reliable operation, which is one of the key requirements for single-pass free-electron lasers (FELs). The Photo Injector test facility at DESY, Zeuthen site (PITZ) is optimizing high brightness electron sources for linac based FELs such as the European XFEL. Recent measurements at PITZ using a photocathode laser with a flat-top temporal profile have revealed record low transverse emittance values at different bunch charges. As a next step towards the further improvement of the high quality beams, a cathode laser system, capable of producing quasi-3D ellipsoidal bunches is intended to be used at PITZ. In this work the beam dynamics optimization results for various bunch charges and for flat-top and 3D ellipsoidal cathode laser shapes are presented. For each working point the relative emittance growth is estimated due to possible deviations of the machine parameters.

THP007	Recent Electron Beam Optimization at PITZ	689
	G. Vashchenko, P. Boonpornprasert, J.D. Good, M. Groß, I.I. Isaev, D.K. Kalantaryan, M. Khojoyan, G. Kourkafas, M. Krasilnikov, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevřel, T. Rublack, F. Stephan DESY Zeuthen, Zeuthen, Germany G. Asova INRNE, Sofia, Bulgaria G. Pathak Uni HH, Hamburg, Germany D. Richter HZB, Berlin, Germany
	High brightness electron sources for linac based freee-lectron lasers operating at short wavelength such as FLASH and the European XFEL are characterized and optimized at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). In the last few years PITZ mainly was used to condition RF guns for their later operation at FLASH and the European XFEL. Only limited time could be spent for beam characterization. However, recently we have performed emittance measurements and optimization for a reduced gun accelerating gradient which is similar to the usual operation conditions at FLASH. The results of these measurements are presented in this paper.

THP060	Design of a Spatio-temporal 3-D Ellipsoidal Photo Cathode Laser System for the High Brightness Photo Injector PITZ	878
	T. Rublack, J.D. Good, M. Khojoyan, M. Krasilnikov, F. Stephan DESY Zeuthen, Zeuthen, Germany A.V. Andrianov, E. Gacheva, E. Khazanov, S. Mironov, A. Poteomkin, V. Zelenogorsky IAP/RAS, Nizhny Novgorod, Russia I. Hartl, S. Schreiber DESY, Hamburg, Germany E. Syresin JINR, Dubna, Moscow Region, Russia
	Funding: German Federal Ministry of education and Research, project 05K10CHE “Development and experimental test of a laser system for producing quasi 3D ellipsoidal laser pulses” and RFBR grant 13-02-91323. Minimized emittance is crucial for improved operation of linac-based free electron lasers. Simulations have thus shown 3-D ellipsoidal photocathode laser pulses are superior to the standard Gaussian or cylindrical laser pulses in this manner. Therefore, in collaboration with the Joint Institute of Nuclear Research (JINR, Dubna, Russia) and the Photo Injector Test facility at DESY, Zeuthen (PITZ), a prototype system capable of producing spatio-temporal 3-D ellipsoidal pulses has been constructed at the Institute of Applied Physics (IAP, Nizhny Novgorod, Russia). The system consists of a dual-output, 1030 nm fiber laser coupled with disc amplifiers, a scheme based on Spatial Light Modulators for spatial and temporal pulse shaping of the primary output, a cross-correlator set up utilizing the secondary output to characterize the primary output, and finally frequency conversion to the UV. A preliminary, temporal ellipsoidal shaped IR pulse has been observed and measured so far at IAP RAS. As of writing, improvements and refinements of the system are ongoing and it is expected to replicate the finalized prototype at PITZ soon.

Paper

Title

Page

Start-to-End Simulations for IR/THz Undulator Radiation at PITZ

153

P. Boonpornprasert, M. Khojoyan, M. Krasilnikov, F. Stephan
DESY Zeuthen, Zeuthen, Germany
B. Marchetti, E. Schneidmiller, M.V. Yurkov
DESY, Hamburg, Germany
S. Rimjaem
Chiang Mai University, Chiang Mai, Thailand

High brightness electron sources for modern linac-based Free-Electron Lasers (FELs) have been characterized and optimized at the Photo Injector Test facility at DESY, Zeuthen site (PITZ). Since the time structure of the electron bunches at PITZ is identical to those at the European XFEL, the PITZ accelerator is being considered as a proper machine for the development of an IR/THz source prototype for pump and probe experiments planned at the European XFEL. Tunable IR/THz radiation sources using synchrotron radiation from a dipole magnet, transition radiation, high gain FELs and coherent radiation of tailored or premodulated beams are currently under consideration. This work describes start-to-end simulations for generating the FEL radiation using an APPLE-II undulator with electron beams produced by the PITZ accelerator. Analysis of the physical parameter space has been performed with tools of the FAST program code package. Electron Beam dynamics simulations were performed by using the ASTRA code, while the GENESIS 1.3 code was used to study the SASE process. The results of these studies are presented and discussed in this paper.

THP006

Optimization of the PITZ Photo Injector Towards the Best Achievable Beam Quality

685

M. Khojoyan, M. Krasilnikov, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany

Funding: The work is supported by the German Federal Ministry of education and Research, project 05K10CHE and RFBR grant 13-02-91323.
Uniform 3D ellipsoids are proven to be the best distributions for high brightness charged particle beam applications due to the linear dependence of the space charge fields on the position within the distribution. Such electron bunches have lower emittance and are less sensitive to the machine settings and, therefore, should allow more reliable operation, which is one of the key requirements for single-pass free-electron lasers (FELs). The Photo Injector test facility at DESY, Zeuthen site (PITZ) is optimizing high brightness electron sources for linac based FELs such as the European XFEL. Recent measurements at PITZ using a photocathode laser with a flat-top temporal profile have revealed record low transverse emittance values at different bunch charges. As a next step towards the further improvement of the high quality beams, a cathode laser system, capable of producing quasi-3D ellipsoidal bunches is intended to be used at PITZ. In this work the beam dynamics optimization results for various bunch charges and for flat-top and 3D ellipsoidal cathode laser shapes are presented. For each working point the relative emittance growth is estimated due to possible deviations of the machine parameters.

THP007

Recent Electron Beam Optimization at PITZ

689

G. Vashchenko, P. Boonpornprasert, J.D. Good, M. Groß, I.I. Isaev, D.K. Kalantaryan, M. Khojoyan, G. Kourkafas, M. Krasilnikov, D. Malyutin, D. Melkumyan, A. Oppelt, M. Otevřel, T. Rublack, F. Stephan
DESY Zeuthen, Zeuthen, Germany
G. Asova
INRNE, Sofia, Bulgaria
G. Pathak
Uni HH, Hamburg, Germany
D. Richter
HZB, Berlin, Germany

High brightness electron sources for linac based freee-lectron lasers operating at short wavelength such as FLASH and the European XFEL are characterized and optimized at the Photo Injector Test Facility at DESY, Zeuthen site (PITZ). In the last few years PITZ mainly was used to condition RF guns for their later operation at FLASH and the European XFEL. Only limited time could be spent for beam characterization. However, recently we have performed emittance measurements and optimization for a reduced gun accelerating gradient which is similar to the usual operation conditions at FLASH. The results of these measurements are presented in this paper.

THP060

Design of a Spatio-temporal 3-D Ellipsoidal Photo Cathode Laser System for the High Brightness Photo Injector PITZ

878

T. Rublack, J.D. Good, M. Khojoyan, M. Krasilnikov, F. Stephan
DESY Zeuthen, Zeuthen, Germany
A.V. Andrianov, E. Gacheva, E. Khazanov, S. Mironov, A. Poteomkin, V. Zelenogorsky
IAP/RAS, Nizhny Novgorod, Russia
I. Hartl, S. Schreiber
DESY, Hamburg, Germany
E. Syresin
JINR, Dubna, Moscow Region, Russia

Funding: German Federal Ministry of education and Research, project 05K10CHE “Development and experimental test of a laser system for producing quasi 3D ellipsoidal laser pulses” and RFBR grant 13-02-91323.
Minimized emittance is crucial for improved operation of linac-based free electron lasers. Simulations have thus shown 3-D ellipsoidal photocathode laser pulses are superior to the standard Gaussian or cylindrical laser pulses in this manner. Therefore, in collaboration with the Joint Institute of Nuclear Research (JINR, Dubna, Russia) and the Photo Injector Test facility at DESY, Zeuthen (PITZ), a prototype system capable of producing spatio-temporal 3-D ellipsoidal pulses has been constructed at the Institute of Applied Physics (IAP, Nizhny Novgorod, Russia). The system consists of a dual-output, 1030 nm fiber laser coupled with disc amplifiers, a scheme based on Spatial Light Modulators for spatial and temporal pulse shaping of the primary output, a cross-correlator set up utilizing the secondary output to characterize the primary output, and finally frequency conversion to the UV. A preliminary, temporal ellipsoidal shaped IR pulse has been observed and measured so far at IAP RAS. As of writing, improvements and refinements of the system are ongoing and it is expected to replicate the finalized prototype at PITZ soon.