NAPAC2019 - List of Authors (Wu, J.Y.)

Paper	Title	Page
WEPLH02	Experience with Long-Pulse Operation of the PIP2IT Warm Front End	803
	A.V. Shemyakin, J.-P. Carneiro, A.Z. Chen, D. Frolov, B.M. Hanna, R. Neswold, L.R. Prost, G.W. Saewert, A. Saini, V.E. Scarpine, A. Warner, J.Y. Wu Fermilab, Batavia, Illinois, USA C.J. Richard NSCL, East Lansing, Michigan, USA
	Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics The warm front end of the PIP2IT accelerator, assembled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H⁻ ion source, a 2-m long Low Energy Beam Transport (LEBT) line, a 2.1-MeV, 162.5 MHz CW RFQ, followed by a 10-m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation in regimes where the average beam power in this front end emulates the operation of the proposed PIP-II accelerator, which will have a duty factor of 1.1% or above. The maximum achieved power is 5 kW (2.1 MeV x 5 mA x 25 ms x 20 Hz). This paper describes the difficulties encountered and some of the solutions that were implemented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-WEPLH02
About •	paper received ※ 20 August 2019 paper accepted ※ 01 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Experience with Long-Pulse Operation of the PIP2IT Warm Front End

803

A.V. Shemyakin, J.-P. Carneiro, A.Z. Chen, D. Frolov, B.M. Hanna, R. Neswold, L.R. Prost, G.W. Saewert, A. Saini, V.E. Scarpine, A. Warner, J.Y. Wu
Fermilab, Batavia, Illinois, USA
C.J. Richard
NSCL, East Lansing, Michigan, USA

Funding: This manuscript has been authored by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics
The warm front end of the PIP2IT accelerator, assembled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H⁻ ion source, a 2-m long Low Energy Beam Transport (LEBT) line, a 2.1-MeV, 162.5 MHz CW RFQ, followed by a 10-m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation in regimes where the average beam power in this front end emulates the operation of the proposed PIP-II accelerator, which will have a duty factor of 1.1% or above. The maximum achieved power is 5 kW (2.1 MeV x 5 mA x 25 ms x 20 Hz). This paper describes the difficulties encountered and some of the solutions that were implemented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-WEPLH02

About •

paper received ※ 20 August 2019 paper accepted ※ 01 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)