NAPAC2019 - List of Authors (Stoupin, S.)

Paper	Title	Page
TUPLH08	X-Ray and Charged Particle Detection by Detuning of a Microwave Resonator	503
	S.P. Antipov, P.V. Avrakhov, E. Dosov, E. Gomez, S.V. Kuzikov Euclid TechLabs, LLC, Solon, Ohio, USA S. Stoupin Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA A.A. Vikharev IAP/RAS, Nizhny Novgorod, Russia
	Funding: DOE SBIR Charged particle detection is important for beam alignment, beam loss and background control. In case of halo detection, traditional wire scanner measurement utilizing carbon or tungsten wires is limited by the damage threshold of these materials. In this paper we present an electrodeless method to measure halo with a diamond scraper. This measurement utilizes a microwave resonator placed around the diamond scraper which is sensitive to charged particle-induced conductivity. Due to this transient induced conductivity in the dielectric, a microwave coupling to the resonator changes. Diamond in this case is chosen as a radiation hard material with excellent thermal properties. The absence of electrodes makes the device robust under the beam. The same measurement can be done for x-ray flux monitoring which is important for measurement feedback and calibration at modern x-ray light sources. In this case x-rays passing through the diamond sensing element enable a photo-induced conductivity and that in turn detunes the cavity placed around the diamond. Diamond being a low-Z material allows for in-line x-ray flux measurement without significant beam attenuation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH08
About •	paper received ※ 28 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

X-Ray and Charged Particle Detection by Detuning of a Microwave Resonator

503

S.P. Antipov, P.V. Avrakhov, E. Dosov, E. Gomez, S.V. Kuzikov
Euclid TechLabs, LLC, Solon, Ohio, USA
S. Stoupin
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
A.A. Vikharev
IAP/RAS, Nizhny Novgorod, Russia

Funding: DOE SBIR
Charged particle detection is important for beam alignment, beam loss and background control. In case of halo detection, traditional wire scanner measurement utilizing carbon or tungsten wires is limited by the damage threshold of these materials. In this paper we present an electrodeless method to measure halo with a diamond scraper. This measurement utilizes a microwave resonator placed around the diamond scraper which is sensitive to charged particle-induced conductivity. Due to this transient induced conductivity in the dielectric, a microwave coupling to the resonator changes. Diamond in this case is chosen as a radiation hard material with excellent thermal properties. The absence of electrodes makes the device robust under the beam. The same measurement can be done for x-ray flux monitoring which is important for measurement feedback and calibration at modern x-ray light sources. In this case x-rays passing through the diamond sensing element enable a photo-induced conductivity and that in turn detunes the cavity placed around the diamond. Diamond being a low-Z material allows for in-line x-ray flux measurement without significant beam attenuation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH08

About •

paper received ※ 28 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)