NAPAC2019 - List of Authors (Rose, J.)

Paper	Title	Page
TUPLH19	Upgrade and Operation Experience of Solid-State Switching Klystron Modulator in NSLS-II Linac	519
	H. Ma, J. Rose BNL, Upton, New York, USA
	Funding: US DOE The NSLS-II synchrotron light-source at BNL uses three S-band, 45MW klystrons in its injector LINAC. At the core of the klystron station design is the novel solid-state switching modulators (or SSM). Compared to the conventional PFN klystron modulators, the main advantages of the SSM include the compact size requiring a smaller footprint in the LINAC, and a very flat top in the produced klystron HV pulses. The flatness of the HV pulses is very important for NSLS-II LINAC that runs multi-bunch beams to keep the beam energy dispersion within the tolerance. The principle of the SSM is fairly simple. It uses a large number of relatively low-voltage switched charging capacitor cells (or SU’s) in parallel. A specially designed, high step-up ratio, pulse transformer in the oil-tank with the same number of primary windings (as SU’s) combines the power from all the SU’s, and steps up to the required ~300kV klystron beam voltage. The operation experience at NSLS-II has proven the performance and reliability of the SSM’s. The BNL Model K2 SSM’s are currently being upgraded to Model K300 to run more powerful, and more cost-effective Canon’s E37302A klystrons.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH19
About •	paper received ※ 27 August 2019 paper accepted ※ 19 November 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade and Operation Experience of Solid-State Switching Klystron Modulator in NSLS-II Linac

519

H. Ma, J. Rose
BNL, Upton, New York, USA

Funding: US DOE
The NSLS-II synchrotron light-source at BNL uses three S-band, 45MW klystrons in its injector LINAC. At the core of the klystron station design is the novel solid-state switching modulators (or SSM). Compared to the conventional PFN klystron modulators, the main advantages of the SSM include the compact size requiring a smaller footprint in the LINAC, and a very flat top in the produced klystron HV pulses. The flatness of the HV pulses is very important for NSLS-II LINAC that runs multi-bunch beams to keep the beam energy dispersion within the tolerance. The principle of the SSM is fairly simple. It uses a large number of relatively low-voltage switched charging capacitor cells (or SU’s) in parallel. A specially designed, high step-up ratio, pulse transformer in the oil-tank with the same number of primary windings (as SU’s) combines the power from all the SU’s, and steps up to the required ~300kV klystron beam voltage. The operation experience at NSLS-II has proven the performance and reliability of the SSM’s. The BNL Model K2 SSM’s are currently being upgraded to Model K300 to run more powerful, and more cost-effective Canon’s E37302A klystrons.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLH19

About •

paper received ※ 27 August 2019 paper accepted ※ 19 November 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)