NAPAC2019 - List of Authors (Fliller, III, R.P.)

Paper	Title	Page
MOPLM01	Alternative Injection Schemes to the NSLS-II Using Nonlinear Injection Magnets	91
	R.P. Fliller, III, G. Bassi, A. Blednykh, C. Hetzel, V.V. Smaluk, C.J. Spataro, P. Zuhoski BNL, Upton, New York, USA
	Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy The NSLS-II storage ring uses the standard four bump injection scheme to inject beam off axis. BESSY and MAX IV are now using a pulsed multipole magnet as an injection kicker. The injected beam sees a field off axis for injection while the stored beam experiences no field on the magnet axis. The principle advantage of using a pulsed multipole for injection is that the stored beam motion is greatly reduced since the field on axis is negligible. The number of pulsed magnets is reduced from five in the nominal scheme (septum and four bumps) to two or three thereby reducing the possible failure modes. This also eliminates the need to precisely match the pulse shapes of four dipole magnets to achieve minimal stored beam motion outside of the bump. In this paper we discuss two schemes of injecting into the NSLS-II using a pulsed multipole magnet. The first scheme uses a single pulsed multipole located in one cell downstream of the injection septum as the injection kicker. The second scheme uses two pulsed multipoles in the injection straight to perform the injection. We discuss both methods of injection and compare each method.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLM01
About •	paper received ※ 27 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLS04	Re-Evaluation of the NSLS-II Active Interlock Window	456
	R.P. Fliller, III, C. Hetzel, Y. Hidaka, T. Tanabe BNL, Upton, New York, USA
	Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy The NSLS-II Active Interlock is the system which protects the NSLS-II Storage Ring vacuum chamber from damage due to synchrotron radiation. The Active Interlock measures the beam position and angle at all insertion devices and issues a beam dump if the beam is outside of the pre-defined window. The window is determined by thermal analysis of vacuum apertures and considers the effects of local magnets such as canting magnets, etc. Recently, it was realized that the insertion device correction coils where not considered in the initial evaluation of the envelope. The purpose of these coils is to correct for the orbit deviations caused by imperfections in the insertion devices that steer the beam. The usual effect is to negate any angle induced by the device, however, if the coil is not set properly the beam may have a larger angle than permitted by the Active Interlock even though the angle calculation does not show it. In this paper we discuss the effect of the insertion device coils on the electron beam and the steps taken to account for this effect in the Active Interlock.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLS04
About •	paper received ※ 27 August 2019 paper accepted ※ 16 November 2020 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Alternative Injection Schemes to the NSLS-II Using Nonlinear Injection Magnets

91

R.P. Fliller, III, G. Bassi, A. Blednykh, C. Hetzel, V.V. Smaluk, C.J. Spataro, P. Zuhoski
BNL, Upton, New York, USA

Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
The NSLS-II storage ring uses the standard four bump injection scheme to inject beam off axis. BESSY and MAX IV are now using a pulsed multipole magnet as an injection kicker. The injected beam sees a field off axis for injection while the stored beam experiences no field on the magnet axis. The principle advantage of using a pulsed multipole for injection is that the stored beam motion is greatly reduced since the field on axis is negligible. The number of pulsed magnets is reduced from five in the nominal scheme (septum and four bumps) to two or three thereby reducing the possible failure modes. This also eliminates the need to precisely match the pulse shapes of four dipole magnets to achieve minimal stored beam motion outside of the bump. In this paper we discuss two schemes of injecting into the NSLS-II using a pulsed multipole magnet. The first scheme uses a single pulsed multipole located in one cell downstream of the injection septum as the injection kicker. The second scheme uses two pulsed multipoles in the injection straight to perform the injection. We discuss both methods of injection and compare each method.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLM01

About •

paper received ※ 27 August 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPLS04

Re-Evaluation of the NSLS-II Active Interlock Window

456

R.P. Fliller, III, C. Hetzel, Y. Hidaka, T. Tanabe
BNL, Upton, New York, USA

Funding: This manuscript has been authored by Brookhaven Science Associates, LLC under Contract No. DE-SC0012704 with the U.S. Department of Energy
The NSLS-II Active Interlock is the system which protects the NSLS-II Storage Ring vacuum chamber from damage due to synchrotron radiation. The Active Interlock measures the beam position and angle at all insertion devices and issues a beam dump if the beam is outside of the pre-defined window. The window is determined by thermal analysis of vacuum apertures and considers the effects of local magnets such as canting magnets, etc. Recently, it was realized that the insertion device correction coils where not considered in the initial evaluation of the envelope. The purpose of these coils is to correct for the orbit deviations caused by imperfections in the insertion devices that steer the beam. The usual effect is to negate any angle induced by the device, however, if the coil is not set properly the beam may have a larger angle than permitted by the Active Interlock even though the angle calculation does not show it. In this paper we discuss the effect of the insertion device coils on the electron beam and the steps taken to account for this effect in the Active Interlock.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLS04

About •

paper received ※ 27 August 2019 paper accepted ※ 16 November 2020 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)