NAPAC2019 - List of Authors (DiMarco, J.)

Paper	Title	Page
MOPLO20	Quench Performance and Field Quality of the 15 T Nb₃Sn Dipole Demonstrator MDPCT1 in the First Test Run	282
	A.V. Zlobin, E.Z. Barzi, J.R. Carmichael, G. Chlachidze, J. DiMarco, V.V. Kashikhin, S. Krave, I. Novitski, C.R. Orozco, S. Stoynev, T. Strauss, M.A. Tartaglia, D. Turrioni Fermilab, Batavia, Illinois, USA
	Funding: Work is supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy U.S. Magnet Development Program (US-MDP) is developing high-field accelerator magnets for a post-LHC hadron collider. In June 2019 Fermilab has tested a new Nb₃Sn dipole model, which produced a world record field of 14.1 T at 4.5 K. The magnet design is based on 60 mm aperture 4-layer shell-type coils, graded between the inner and outer layers. The Rutherford cable in the two innermost layers consists of 28 strands 1.0 mm in diameter and the cable in the two outermost layers 40 strands 0.7 mm in diameter. Both cables were fabricated at Fermilab using RRP Nb₃Sn composite wires produced by Bruker-OST. An innovative mechanical structure based on aluminum clamps and a thick stainless-steel skin was developed to preload brittle Nb₃Sn coils and support large Lorentz forces. The maximum field for this design is limited by 15 T due to mechanical considerations. The first magnet assembly was done with lower coil pre-load to achieve 14 T and minimize the risk of coil damage during assembly. The 15 T dipole demonstrator design and the first results of magnet cold tests including quench performance and magnetic measurements are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLO20
About •	paper received ※ 27 August 2019 paper accepted ※ 03 September 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Quench Performance and Field Quality of the 15 T Nb₃Sn Dipole Demonstrator MDPCT1 in the First Test Run

282

A.V. Zlobin, E.Z. Barzi, J.R. Carmichael, G. Chlachidze, J. DiMarco, V.V. Kashikhin, S. Krave, I. Novitski, C.R. Orozco, S. Stoynev, T. Strauss, M.A. Tartaglia, D. Turrioni
Fermilab, Batavia, Illinois, USA

Funding: Work is supported by Fermi Research Alliance, LLC, under contract No. DE-AC02-07CH11359 with the U.S. Department of Energy
U.S. Magnet Development Program (US-MDP) is developing high-field accelerator magnets for a post-LHC hadron collider. In June 2019 Fermilab has tested a new Nb₃Sn dipole model, which produced a world record field of 14.1 T at 4.5 K. The magnet design is based on 60 mm aperture 4-layer shell-type coils, graded between the inner and outer layers. The Rutherford cable in the two innermost layers consists of 28 strands 1.0 mm in diameter and the cable in the two outermost layers 40 strands 0.7 mm in diameter. Both cables were fabricated at Fermilab using RRP Nb₃Sn composite wires produced by Bruker-OST. An innovative mechanical structure based on aluminum clamps and a thick stainless-steel skin was developed to preload brittle Nb₃Sn coils and support large Lorentz forces. The maximum field for this design is limited by 15 T due to mechanical considerations. The first magnet assembly was done with lower coil pre-load to achieve 14 T and minimize the risk of coil damage during assembly. The 15 T dipole demonstrator design and the first results of magnet cold tests including quench performance and magnetic measurements are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOPLO20

About •

paper received ※ 27 August 2019 paper accepted ※ 03 September 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)