| Title |
Designing the European Spallation Source Tuning Dump Beam Imaging System |
| Authors |
- M.G. Ibison, C.P. Welschpresenter
Cockcroft Institute, Warrington, Cheshire, United Kingdom
- E. Adli, G. Christoforo, H. Gjersdal
University of Oslo, Oslo, Norway
- M.G. Ibison, C.P. Welschpresenter
The University of Liverpool, Liverpool, United Kingdom
- T.J. Shea, C.A. Thomas
ESS, Lund, Sweden
|
| Abstract |
The first section of the European Spallation Source (ESS) to receive high-energy protons when live operation begins will be the Tuning Dump beam-line. The dump line will be used during accelerator commissioning to tune the linac, and must accept the full range of ESS energies up to 2 GeV, from 5µs probe pulse to full 2.86ms pulse length, and beam sizes up to the 250 mm limit of the physical aperture, although the allowed pulse rate will be restricted by the thermal capacity of the dump. An imaging system has been developed to view remotely the transverse beam profile in the section immediately before the dump entrance, using insertable scintillator screens. This contribution presents the principal design parameters for this system, with particular reference to the techniques used in assessing the radiation and thermal environments and their impact on the selection of locations for the imaging cameras, and the specification of the mechanical screen actuators. The predicted optical performance of the system is also summarised.
|
| Funding |
In-Kind Agreement, ESS/Norway |
| Paper |
download WEPTS107.PDF [0.852 MB / 4 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
15 May 2019 |
| Accepted |
22 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-WEPTS107 |
| Pages |
3374-3377 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
