| Title |
Development of the Bunch Shape Monitor Using the Carbon-Nano Tube Wire |
| Authors |
- R. Kitamura, N. Hayashi, K. Hirano, Y. Kondo, K. Moriya, H. Oguri
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
- K. Futatsukawa, T. Miyao, M. Otani
KEK, Ibaraki, Japan
- S. Kosaka, Y. Nemoto
Nippon Advanced Technology Co., Ltd., Tokai, Japan
|
| Abstract |
A bunch shape monitor (BSM) is one of the important instruments to measure the longitudinal phase space distribution. The information of the bunch length measured by the BSM is useful to tune phases of the accelerating cavities in the linear accelerator. For example, in the J-PARC linac, three BSM’s using the tungsten wire are installed and tested at the ACS section to measure the bunch shapes between the accelerating cavities. However, this conventional BSM is hard to measure the bunch shape of H⁻ beam with 3 MeV at the beam transport between the RFQ and DTL sections, because the wire is broken around the center region of the beam. The new BSM using the carbon-nano-tube (CNT) wire is being developed to be able to measure the bunch shape of the H⁻ beam with 3 MeV. One challenge to introduce the CNT wire for the BSM is the measure to the discharge. The careful attention should be paid to apply the high voltage of 10 kV to the CNT wire. The several measures are taken to suppress the discharge from the wire and operate the CNT-BSM. This presentation reports the current status of the development and future prospective for the CNT-BSM.
|
| Paper |
download WEPGW033.PDF [0.935 MB / 4 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
15 May 2019 |
| Accepted |
22 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-WEPGW033 |
| Pages |
2543-2546 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
