| Title |
Automatisation of the SPS ElectroStatic Septa Alignment |
| Authors |
- S. Hirlaender
ATI, Vienna, Austria
- M.A. Fraser, B. Goddardpresenter, V. Kain, J. Prieto, L.S. Stoel, F.M. Velotti
CERN, Geneva, Switzerland
- M. Szakaly
Wigner Research Centre for Physics, Institute for Particle and Nuclear Physics, Budapest, Hungary
|
| Abstract |
An electrostatic septum composed of 5 separate tanks is used to slow-extract the 400 GeV proton beam resonantly on the third integer resonance from the CERN SPS. The septa are all mounted on a single support structure that can move the ensemble coherently and, in addition, the internal anode and cathode of each tank can be moved independently. The septum is aligned to the beam by measuring and minimising the induced beam loss signals in the extraction region following an alignment procedure that is usually carried out manually at the beginning of each year. The large number of positional degrees of freedom complicates the procedure and until recently each tank was aligned one after the other semi-manually, typically requiring 8 hours. It is not uncommon that the septum has to be re-aligned later in the run taking time away from physics programme. To tackle this issue, a simplified beam dynamics and scattering simulation routine was developed to permit error studies with a large number of seeds to be carried out in a reasonable computation time. In this contribution, the simulation model will be described before the results of its exploitation to understand the efficacy of alignment procedures based on different optimization algorithms are discussed and compared to the present operational procedure. The effort culminated with the implementation of an automated alignment procedure based on a Powell optimisation algorithm that reduced the time needed to align the septum by over an order of magnitude.
|
| Paper |
download THPRB080.PDF [0.558 MB / 4 pages] |
| Export |
download ※ BibTeX
※ LaTeX
※ Text/Word
※ RIS
※ EndNote |
| Conference |
IPAC2019 |
| Series |
International Particle Accelerator Conference (10th) |
| Location |
Melbourne, Australia |
| Date |
19-24 May 2019 |
| Publisher |
JACoW Publishing, Geneva, Switzerland |
| Editorial Board |
Mark Boland (UoM, Saskatoon, SK, Canada); Hitoshi Tanaka (KEK, Tsukuba, Japan); David Button (ANSTO, Kirrawee, NSW, Australia); Rohan Dowd (ANSTO, Kirrawee, NSW, Australia); Volker RW Schaa (GSI, Darmstadt, Germany); Eugene Tan (ANSTO, Kirrawee, NSW, Australia) |
| Online ISBN |
978-3-95450-208-0 |
| Received |
14 May 2019 |
| Accepted |
22 May 2019 |
| Issue Date |
21 June 2019 |
| DOI |
doi:10.18429/JACoW-IPAC2019-THPRB080 |
| Pages |
4001-4004 |
| Copyright |
 Published by JACoW Publishing under the terms of the Creative Commons Attribution 3.0 International license. Any further distribution of this work must maintain attribution to the author(s), the published article's title, publisher, and DOI. |
|
