IPAC2018 - List of Authors (Zelenski, A.)

Paper	Title	Page
TUYGBE4	Optically-pumped Polarized H⁻ and 3 He++ Ion Sources Development at RHIC	644
	A. Zelenski, G. Atoian, E.N. Beebe, A. Poblaguev, D. Raparia, J. Ritter BNL, Upton, Long Island, New York, USA J.D. Maxwell, R. Milner, M. Musgrave MIT, Cambridge, Massachusetts, USA
	The RHIC Optically-pumped Polarized H⁻ Ion Source (OPPIS) upgrade with the atomic beam hydrogen injector and the He-ionizer cell was commissioned for operation in the Run-2013. The use of the high brightness primary proton source resulted in higher polarized beam intensity and polarization delivered for injection to Linac-Booster-AGS-RHIC accelerator complex. The proposed polarized 3He++ acceleration in RHIC and future electron- ion col-lider (eRHIC) will require about 2·10¹¹ ions in the source pulse. A new technique had been proposed for production of high intensity polarized 3He++ ion beam. It is based on ionization and accumulation of the 3He gas (polarized by optical-pumping and metastability-exchange technique in the high magnetic field of a 5.0 T) in the Electron Beam Ion Source (EBIS). We present a status of the 3He++ ion source development.
	Slides TUYGBE4 [4.596 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBE4
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML016	High-Intensity Magnetron H⁻ Ion Sources and Injector Development at BNL Linac	1564
	A. Zelenski, G. Atoian, T. Lehn, D. Raparia, J. Ritter BNL, Upton, Long Island, New York, USA
	The BNL magnetron-type H⁻ ion source and the injec-tor are being upgraded to higher duty-factor as a part of Linac intensity increase project [1]. The BNL magnetron source presently delivers 110 -120 mA H⁻ ion current with 650 us pulse duration and 7 Hz repetition rate. The pulse duration was increased to 1000 μs by modifications of the gas injector pulsed valve and the use of the new arc-discharge power supply (with the arc-current stabilization circuit) which improved current stability and reduced current noise. The Low Energy Beam Transport (LEBT) lines combine two beams. The first line is the polarized OPPIS (Optically Pumped Polarized H⁻ Ion Source) beam-line and the second is the high-intensity un-polarized beam-line from the magnetron source, which transports beam to the RFQ after the passage of 45 degree bending magnet. The second magnetron source was installed in the straight LEBT section in 2017, in which the polarized OPPIS beam was not planned. In this, optimal for H⁻ beam transport configuration, the beam intensity was increased to 80 mA after the RFQ. The experience of the two sources layout operation (one source in operation the second source in standby) might be useful for facilities with the high downtime cost (like high-energy collider LHC or multi-user facilities like SNS).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optically-pumped Polarized H⁻ and 3 He++ Ion Sources Development at RHIC

644

A. Zelenski, G. Atoian, E.N. Beebe, A. Poblaguev, D. Raparia, J. Ritter
BNL, Upton, Long Island, New York, USA
J.D. Maxwell, R. Milner, M. Musgrave
MIT, Cambridge, Massachusetts, USA

The RHIC Optically-pumped Polarized H⁻ Ion Source (OPPIS) upgrade with the atomic beam hydrogen injector and the He-ionizer cell was commissioned for operation in the Run-2013. The use of the high brightness primary proton source resulted in higher polarized beam intensity and polarization delivered for injection to Linac-Booster-AGS-RHIC accelerator complex. The proposed polarized 3He++ acceleration in RHIC and future electron- ion col-lider (eRHIC) will require about 2·10¹¹ ions in the source pulse. A new technique had been proposed for production of high intensity polarized 3He++ ion beam. It is based on ionization and accumulation of the 3He gas (polarized by optical-pumping and metastability-exchange technique in the high magnetic field of a 5.0 T) in the Electron Beam Ion Source (EBIS). We present a status of the 3He++ ion source development.

Slides TUYGBE4 [4.596 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUYGBE4

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPML016

High-Intensity Magnetron H⁻ Ion Sources and Injector Development at BNL Linac

1564

A. Zelenski, G. Atoian, T. Lehn, D. Raparia, J. Ritter
BNL, Upton, Long Island, New York, USA

The BNL magnetron-type H⁻ ion source and the injec-tor are being upgraded to higher duty-factor as a part of Linac intensity increase project [1]. The BNL magnetron source presently delivers 110 -120 mA H⁻ ion current with 650 us pulse duration and 7 Hz repetition rate. The pulse duration was increased to 1000 μs by modifications of the gas injector pulsed valve and the use of the new arc-discharge power supply (with the arc-current stabilization circuit) which improved current stability and reduced current noise. The Low Energy Beam Transport (LEBT) lines combine two beams. The first line is the polarized OPPIS (Optically Pumped Polarized H⁻ Ion Source) beam-line and the second is the high-intensity un-polarized beam-line from the magnetron source, which transports beam to the RFQ after the passage of 45 degree bending magnet. The second magnetron source was installed in the straight LEBT section in 2017, in which the polarized OPPIS beam was not planned. In this, optimal for H⁻ beam transport configuration, the beam intensity was increased to 80 mA after the RFQ. The experience of the two sources layout operation (one source in operation the second source in standby) might be useful for facilities with the high downtime cost (like high-energy collider LHC or multi-user facilities like SNS).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPML016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)