Paper | Title | Page |
---|---|---|
THPAK131 | Investigation of Two-Bunch Train Compression by Velocity Bunching | 3548 |
|
||
Two electron beamlets, also referred as two-bunch train with adjustable time and energy spacing are popular in many applications such as two color FEL and pump-probe experiments. We investigate compression of two-bunch train via velocity bunching scheme in a traveling wave accelerator (TWA) tube by varying the phase of TWA tube in a very large range. Beam dynamics simulations show that when the phase injected into the accelerator tube for the beam is set to ≪-100 degree, velocity bunching occurs in a deep over-compression mode, where two-bunch train is continuously tunable in time and in energy space, and the emittance of each sub-bunch is also preserved. In the experiment, we use energy spectrum and defecting cavity to diagnose the train's energy space and time space respectively, the measurements demonstrated that two-bunch train through deep over-compression scheme is separated both in time and in energy space, which also agree well with the predictions. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK131 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPMK115 | Optical Cavity R&D for Laser-Electron Interaction Applications | 4587 |
SUSPF032 | use link to see paper's listing under its alternate paper code | |
|
||
Laser-electron Inverse Compton Scattering X-ray source based on optical enhancement cavity is expected to produce higher-flux and better-quality X-rays than conventional sources, in addition, to become more compact, much cheaper than Free Electron Laser and Synchrotron Radiation. One X-ray source named ThomX is under construction at LAL, France. An electron storage ring with 50 MeV, 16.7 MHz electron beam will collide with a few picosecond pulsed laser to produce 1013 photons per second. A prototype cavity with a high finesse (F=25,100) in the picosecond regime is used to perform R & D for ThomX. We obtained 380 kW power stored in the optical cavity and mode instabilities were observed. The EOM-based frequency modulation to measure the finesse, the influence of dust on finesse, high-power experiments and other related issues are mentioned briefly. We will also describe the TTX2 (Tsinghua Thomson Scattering X-ray source) at Tsinghua University which is in design process. TTX2 prefers using an electron storage ring and an optical cavity in order to get high X-ray flux. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPMK115 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPML099 | Phase Extraction and Stabilization for Coherent Pulse Stacking | 4895 |
SUSPL060 | use link to see paper's listing under its alternate paper code | |
|
||
Funding: This work was supported by the U.S. Department of Energy, Office of Science, Office of High Energy Physics, under Contract DE-AC02-05CH11231. Coherent pulse stacking (CPS) is a new time-domain coherent addition technique that stacks several optical pulses into a single output pulse, enabling high pulse energy and high average power. We model the CPS as a digital filter in the Z domain, and implement two deterministic algorithms extracting the cavity phase from limited data where only the pulse intensity is available. In a 2-stage 15-pulse CPS system, each optical cavity is stabilized at an individually-prescribed round-trip phase with 0.7 deg and 2.1 deg RMS phase errors for Stage 1 and Stage 2 respectively. Optical cavity phase control with nm accuracy ensures 1.2% intensity stability of the stacked pulse over 12 hours. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPML099 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |