IPAC2018 - List of Authors (Westermeier, F.)

Paper	Title	Page
TUPMF072	Microwave Instability and Energy Spread Measurement via Vertical Dispersion Bump in PETRA III	1427
	Y.-C. Chae, D. Dzhingaev, M. Ebert, G. Falkenberg, J. Keil, G. Kube, G.K. Sahoo, M. Sprung, R. Wanzenberg, F. Westermeier DESY, Hamburg, Germany A.I. Novokshonov TPU, Tomsk, Russia
	The recent measurement of bunch length versus current indicated that the longitudinal impedance (Z/n) is 0.15 Ω in close agreement with the impedance model. Naive application of Keil-Schnell criteria predicts the threshold of microwave instability at 0.25 mA. Since the single bunch intensity is in the range of 0.2-2.5 mA depending on the fill-pattern of PETRA III, we expect to observe the fill-pattern dependent energy spread according to the theory. However, the 3rd generation light sources comparable to PETRA III often reported the observation which was much greater than the theoretical one. In order to induce the beam size variation we had used skew quadrupoles to generate the dispersion in vertical plane. In particular we made dispersion bump at the undulator sector so that we were able to use the X-ray optics for the precise determination of small vertical beam size. In this paper we report the experimental setup and measurement data with the estimate on the instability threshold. We also report the vertical emittance and energy spread based on the X-ray beam size measurement as well as the RF signal which was excited by the beam at the longitudinal feedback cavity. K. Balewski, R. Wanzenberg, "OBSERVATION OF INTENSITY DEPENDENT SINGLE BUNCH EFFECTS AT THE SYNCHROTRON LIGHT SOURCE PETRA III", Proc. of IPAC2011, p. 730.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF072
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Microwave Instability and Energy Spread Measurement via Vertical Dispersion Bump in PETRA III

1427

Y.-C. Chae, D. Dzhingaev, M. Ebert, G. Falkenberg, J. Keil, G. Kube, G.K. Sahoo, M. Sprung, R. Wanzenberg, F. Westermeier
DESY, Hamburg, Germany
A.I. Novokshonov
TPU, Tomsk, Russia

The recent measurement of bunch length versus current indicated that the longitudinal impedance (Z/n) is 0.15 Ω in close agreement with the impedance model*. Naive application of Keil-Schnell criteria predicts the threshold of microwave instability at 0.25 mA. Since the single bunch intensity is in the range of 0.2-2.5 mA depending on the fill-pattern of PETRA III, we expect to observe the fill-pattern dependent energy spread according to the theory. However, the 3rd generation light sources comparable to PETRA III often reported the observation which was much greater than the theoretical one. In order to induce the beam size variation we had used skew quadrupoles to generate the dispersion in vertical plane. In particular we made dispersion bump at the undulator sector so that we were able to use the X-ray optics for the precise determination of small vertical beam size. In this paper we report the experimental setup and measurement data with the estimate on the instability threshold. We also report the vertical emittance and energy spread based on the X-ray beam size measurement as well as the RF signal which was excited by the beam at the longitudinal feedback cavity.
* K. Balewski, R. Wanzenberg, "OBSERVATION OF INTENSITY DEPENDENT SINGLE BUNCH EFFECTS AT THE SYNCHROTRON LIGHT SOURCE PETRA III", Proc. of IPAC2011, p. 730.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPMF072

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)