IPAC2018 - List of Authors (Valuch, D.)

Paper	Title	Page
MOPMF047	Transverse Coupling Measurements With High Intensity Beams Using Driven Oscillations	208
	T. Persson, G. Baud, X. Buffat, J.M. Coello de Portugal, E. Fol, K. Fuchsberger, M. Gabriel, M. Gąsior, M. Giovannozzi, G.H. Hemelsoet, M. Hostettler, M. Hruska, D. Jacquet, E.H. Maclean, L. Malina, J. Olexa, P.K. Skowroński, M. Solfaroli Camillocci, M.E. Söderén, R. Tomás, D. Valuch, A. Wegscheider, J. Wenninger CERN, Geneva, Switzerland
	Transverse coupling has been linked to instabilities and reduction in dynamic aperture and is hence a crucial parameter to control in the LHC. In this article we describe the development to use driven oscillations to measure the transverse coupling with high intensity beams. The method relies on the use of the transverse damper to drive an oscillation in a similar way as with an AC-dipole. The calculation of the coupling is based on the turn-by-turn data from all available BPMs gated for the excited bunch.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF047
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF053	Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2	228
	J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth CERN, Geneva, Switzerland D. Amorim Université Grenoble Alpes, Grenoble, France A.A. Gorzawski University of Manchester, Manchester, United Kingdom L. Mether EPFL, Lausanne, Switzerland
	Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF060	Safe Disposal of the LHC Beam without Beam Dump - Method and Experimental Verification	253
	M. Valette, B. Lindstrom, A. Mereghetti, R. Schmidt, M. Solfaroli, J.A. Uythoven, D. Valuch, J. Wenninger, D. Wollmann, M. Zerlauth CERN, Geneva, Switzerland
	Funding: Research supported by the HL-LHC project. In the extremely unlikely event of a non-working beam dumping system in the LHC, the 360 MJ of stored beam energy can be dissipated in the collimation system as a last mitigation measure. In such a situation, it is important to reduce the stored beam energy both quickly and at the same time as smoothly as possible in order to limit the risk of trips of critical systems, to avoid quenches of superconducting magnets (which would lead to changes of the beam trajectory and damage to the accelerator) and ultimately damage to the collimators themselves. Detailed steps and parameters have been developed and validated during two dedicated experiments with beam in the LHC. This paper summarizes the key aspects in view of the preparation of such a procedure for operational use, which will allow for the safe disposal of the full LHC beam by the operation crews.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF060
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF072	Transverse Feedback System for the CERN FCC-hh Collider	1997
	W. Höfle, J. Komppula, G. Kotzian, K.S.B. Li, D. Valuch CERN, Geneva, Switzerland
	For the future hadron Collider (FCC-hh) being studied at CERN a strong transverse feedback system is required to damp coupled bunch instabilities. This system is also planned to be used for injection damping. Based on the LHC transverse feedback design we derive requirements for power and kick strength for this system for the different options of bunch spacing, 25 ns and 5 ns, and injection energy. Operation at high gain and close to a half integer tune is being considered and constrains the layout and signal processing. Requirements for the pick-up resolution are derived from the need to keep the emittance increase small. The performance is evaluated using numerical simulations based on the headtail code. Future areas of research and development and possible prototype developments are outlined.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF072
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBD2	Results of UFO Dynamics Studies with Beam in the LHC	2914
	B. Lindstrom, A. Apollonio, P. Bélanger, M. Dziadosz, A.A. Gorzawski, L. K. Grob, E.B. Holzer, A. Lechner, R. Schmidt, M. Valette, D. Valuch, D. Wollmann CERN, Geneva, Switzerland
	Micrometer sized particles entering the LHC beam (the so-called Unidentified Falling Objects or UFOs) are a known cause of localized beam losses since the beginning of high intensity beam operation, however the origin of these particles is not fully known. Their effect limits LHC availability by causing premature dumps due to excessive beam losses and occasionally even magnet quenches. This could become an important limitation for future accelerators such as the High Luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC). The dynamics of these UFOs was investigated in two dedicated experiments. In the first experiment, it was shown that the transverse movements of these particles can be studied by observing bunch-by-bunch losses from bunches with different horizontal and vertical emittances. In the second experiment, UFO-like events around the 16L2 interconnect in the LHC, which has seen intense UFO activity in 2017, were studied with the above method. This paper summarizes the results of both experiments.
	Slides THYGBD2 [1.357 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF035	Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC	3036
	S. A. Antipov University of Chicago, Chicago, Illinois, USA D. Amorim, N. Biancacci, L.R. Carver, G. Mazzacano, A. Mereghetti, E. Métral, S. Redaelli, B. Salvant, D. Valuch CERN, Geneva, Switzerland
	Several options of low resistivity coating have been proposed for the collimator upgrade of the Large Hadron Collider. In order to study their effect on the beam dynamics a special collimator has been built and installed in the machine. Its jaws are coated with three different materials and can be moved transversely to selectively expose the beam to the chosen coating. We have measured the resistive wall tune shifts of each coating material and compared them with that of a standard Carbon Fibre Composite (CFC) collimator jaw. A resolution of the tune shift of the order of 10^-5 has been achieved in the measurement. The results show a significant reduction of the resistive wall tune shift with novel materials. The largest improvement is obtained with a 5 μm Molybdenum coating of a Molybdenum-Graphite jaw. The observed tune shifts show a good agreement with the impedance model and the bench impedance and resistivity measurements. Obtained results can be used to further improve the precision of the impedance model.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF035
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF058	Experimental Characterisation of a Fast Instability Linked to Losses in the 16L2 Cryogenic Half-Cell in the CERN LHC	3103
	B. Salvant, S. A. Antipov, G. Arduini, N. Biancacci, X. Buffat, L.R. Carver, P. Collier, A.A. Gorzawski, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, D. Mirarchi, E. Métral, G. Rumolo, D. Valuch CERN, Geneva, Switzerland L. Mether EPFL, Lausanne, Switzerland
	The operation during the summer months of the 2017 Run of the CERN LHC was plagued with fast beam losses that repeatedly occurred in the 16th arc half-cell at the left of IP2 as well as in the collimation insertion, leading to unwanted beam dumps. Transverse coherent oscillations were observed during this fast process. We detail here the experimental observations of coherent motion that al-lowed shedding light upon parts of the mechanism and identify the potential mitigations that were successfully implemented in the second half of the Run.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Transverse Coupling Measurements With High Intensity Beams Using Driven Oscillations

208

T. Persson, G. Baud, X. Buffat, J.M. Coello de Portugal, E. Fol, K. Fuchsberger, M. Gabriel, M. Gąsior, M. Giovannozzi, G.H. Hemelsoet, M. Hostettler, M. Hruska, D. Jacquet, E.H. Maclean, L. Malina, J. Olexa, P.K. Skowroński, M. Solfaroli Camillocci, M.E. Söderén, R. Tomás, D. Valuch, A. Wegscheider, J. Wenninger
CERN, Geneva, Switzerland

Transverse coupling has been linked to instabilities and reduction in dynamic aperture and is hence a crucial parameter to control in the LHC. In this article we describe the development to use driven oscillations to measure the transverse coupling with high intensity beams. The method relies on the use of the transverse damper to drive an oscillation in a similar way as with an AC-dipole. The calculation of the coupling is based on the turn-by-turn data from all available BPMs gated for the excited bunch.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF047

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF053

Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2

228

J.M. Jimenez, D. Amorim, S. A. Antipov, G. Arduini, A. Bertarelli, N. Biancacci, B. Bradu, E. Bravin, G. Bregliozzi, K. Brodzinski, R. Bruce, X. Buffat, L.R. Carver, P. Chiggiato, S.D. Claudet, P. Collier, R. Garcia Alia, M. Giovannozzi, L. K. Grob, E.B. Holzer, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, B. Lindstrom, T. Medvedeva, A. Milanese, D. Mirarchi, E. Métral, D. Perini, S. Redaelli, G. Rumolo, B. Salvant, R. Schmidt, M. Valette, D. Valuch, J. Wenninger, D. Wollmann, C. Yin Vallgren, C. Zamantzas, M. Zerlauth
CERN, Geneva, Switzerland
D. Amorim
Université Grenoble Alpes, Grenoble, France
A.A. Gorzawski
University of Manchester, Manchester, United Kingdom
L. Mether
EPFL, Lausanne, Switzerland

Recurrent beam dumps significantly perturbed the operation of the CERN LHC in the summer months of 2017, especially in August. These unexpected beam dumps were triggered by fast beam losses that built up in the cryogenic beam vacuum at the half-cell 16 left of LHC-IP2 and were detected either at that location but mainly in the collimation insertions. This contribution details the experimental observables (beam losses, coherent instabilities, heat load to cryogenic system, vacuum signals), the extent of the understanding of the beam loss and instability mechanisms and the mitigation steps and new settings that allowed recovering the luminosity performance of the LHC for the rest of the Run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMF060

Safe Disposal of the LHC Beam without Beam Dump - Method and Experimental Verification

253

M. Valette, B. Lindstrom, A. Mereghetti, R. Schmidt, M. Solfaroli, J.A. Uythoven, D. Valuch, J. Wenninger, D. Wollmann, M. Zerlauth
CERN, Geneva, Switzerland

Funding: Research supported by the HL-LHC project.
In the extremely unlikely event of a non-working beam dumping system in the LHC, the 360 MJ of stored beam energy can be dissipated in the collimation system as a last mitigation measure. In such a situation, it is important to reduce the stored beam energy both quickly and at the same time as smoothly as possible in order to limit the risk of trips of critical systems, to avoid quenches of superconducting magnets (which would lead to changes of the beam trajectory and damage to the accelerator) and ultimately damage to the collimators themselves. Detailed steps and parameters have been developed and validated during two dedicated experiments with beam in the LHC. This paper summarizes the key aspects in view of the preparation of such a procedure for operational use, which will allow for the safe disposal of the full LHC beam by the operation crews.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPMF060

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAF072

Transverse Feedback System for the CERN FCC-hh Collider

1997

W. Höfle, J. Komppula, G. Kotzian, K.S.B. Li, D. Valuch
CERN, Geneva, Switzerland

For the future hadron Collider (FCC-hh) being studied at CERN a strong transverse feedback system is required to damp coupled bunch instabilities. This system is also planned to be used for injection damping. Based on the LHC transverse feedback design we derive requirements for power and kick strength for this system for the different options of bunch spacing, 25 ns and 5 ns, and injection energy. Operation at high gain and close to a half integer tune is being considered and constrains the layout and signal processing. Requirements for the pick-up resolution are derived from the need to keep the emittance increase small. The performance is evaluated using numerical simulations based on the headtail code. Future areas of research and development and possible prototype developments are outlined.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-WEPAF072

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYGBD2

Results of UFO Dynamics Studies with Beam in the LHC

2914

B. Lindstrom, A. Apollonio, P. Bélanger, M. Dziadosz, A.A. Gorzawski, L. K. Grob, E.B. Holzer, A. Lechner, R. Schmidt, M. Valette, D. Valuch, D. Wollmann
CERN, Geneva, Switzerland

Micrometer sized particles entering the LHC beam (the so-called Unidentified Falling Objects or UFOs) are a known cause of localized beam losses since the beginning of high intensity beam operation, however the origin of these particles is not fully known. Their effect limits LHC availability by causing premature dumps due to excessive beam losses and occasionally even magnet quenches. This could become an important limitation for future accelerators such as the High Luminosity upgrade of the LHC (HL-LHC) and the Future Circular Collider (FCC). The dynamics of these UFOs was investigated in two dedicated experiments. In the first experiment, it was shown that the transverse movements of these particles can be studied by observing bunch-by-bunch losses from bunches with different horizontal and vertical emittances. In the second experiment, UFO-like events around the 16L2 interconnect in the LHC, which has seen intense UFO activity in 2017, were studied with the above method. This paper summarizes the results of both experiments.

Slides THYGBD2 [1.357 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THYGBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF035

Single-Collimator Tune Shift Measurement of the Three-Stripe Collimator at the LHC

3036

S. A. Antipov
University of Chicago, Chicago, Illinois, USA
D. Amorim, N. Biancacci, L.R. Carver, G. Mazzacano, A. Mereghetti, E. Métral, S. Redaelli, B. Salvant, D. Valuch
CERN, Geneva, Switzerland

Several options of low resistivity coating have been proposed for the collimator upgrade of the Large Hadron Collider. In order to study their effect on the beam dynamics a special collimator has been built and installed in the machine. Its jaws are coated with three different materials and can be moved transversely to selectively expose the beam to the chosen coating. We have measured the resistive wall tune shifts of each coating material and compared them with that of a standard Carbon Fibre Composite (CFC) collimator jaw. A resolution of the tune shift of the order of 10^-5 has been achieved in the measurement. The results show a significant reduction of the resistive wall tune shift with novel materials. The largest improvement is obtained with a 5 μm Molybdenum coating of a Molybdenum-Graphite jaw. The observed tune shifts show a good agreement with the impedance model and the bench impedance and resistivity measurements. Obtained results can be used to further improve the precision of the impedance model.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF035

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAF058

Experimental Characterisation of a Fast Instability Linked to Losses in the 16L2 Cryogenic Half-Cell in the CERN LHC

3103

B. Salvant, S. A. Antipov, G. Arduini, N. Biancacci, X. Buffat, L.R. Carver, P. Collier, A.A. Gorzawski, W. Höfle, G. Iadarola, G. Kotzian, A. Lechner, T.E. Levens, D. Mirarchi, E. Métral, G. Rumolo, D. Valuch
CERN, Geneva, Switzerland
L. Mether
EPFL, Lausanne, Switzerland

The operation during the summer months of the 2017 Run of the CERN LHC was plagued with fast beam losses that repeatedly occurred in the 16th arc half-cell at the left of IP2 as well as in the collimation insertion, leading to unwanted beam dumps. Transverse coherent oscillations were observed during this fast process. We detail here the experimental observations of coherent motion that al-lowed shedding light upon parts of the mechanism and identify the potential mitigations that were successfully implemented in the second half of the Run.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAF058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)