Author: Uesugi, T.
Paper Title Page
TUPAL027 Design of Multi-MW Rapid Cycling Synchrotron for Accelerator Driven Transmutation System 1057
 
  • Y. Fuwa
    Kyoto ICR, Uji, Kyoto, Japan
  • N. Amemiya
    Kyoto University, Kyoto, Japan
  • Y. Ishi, Y. Kuriyama, T. Uesugi
    Kyoto University, Research Reactor Institute, Osaka, Japan
  
  For the practical application of Accelerator Driven System (ADS) that reduces the harmfulness of radioactive waste by transmutation, we are studying the development of a compact accelerator using a synchrotron as an accelerator capable of supplying a stable proton beam to a nuclear reactor. In this plan, we aim to realize down-sizing and high reliability by adopting an alternating high temperature superconducting magnet and a high repetition synchrotron applying resonant beam extraction. In this presentation we report the basic design of the optical system and beam acceleration sequence of this synchrotron.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL027  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAL030 Improvement of RF Capture with Multi-Turn H− Injection in KURRI FFAG Synchrotron 1066
 
  • T. Uesugi, Y. Fuwa, Y. Ishi, Y. Kuriyama, Y. Mori, H. Okita
    Kyoto University, Research Reactor Institute, Osaka, Japan
  
  In the KURRI FFAG synchrotron, charge-exchanging multi-turn injection is adopted with a stripping foil located on the closed orbit of injection energy. No injection bump orbit system is used and the beam escapes from the foil according to the closed-orbit shift by acceleration. The particles hit the foil many times and the emittance grows up during the injection. In this paper, the capture efficiencies are studied with different rf process, including adiabatic capture.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAL030  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAK034 Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS 3287
 
  • Y. Ishi, Y. Fuwa, Y. Kuriyama, Y. Mori, H. Okita, T. Uesugi
    Kyoto University, Research Reactor Institute, Osaka, Japan
  • J.-B. Lagrange
    Imperial College of Science and Technology, Department of Physics, London, United Kingdom
  
  In scaling FFAG* accelerators, ideally, betatron tunes are fixed for each closed orbit concerned with the certain beam energy. Therefore, they should not vary during the acceleration. However, it is not the case since practical implementations of the magnetic field can not provide perfect scaling conditions. There are two types of radial scaling FFAG ring at Kyoto University Research Reactor Institute: one has no return yokes so called 'yoke free type' adopted by MAIN RING which has a large tune variations causing non negligible beam losses; the other has return yokes and filed clamps adopted by BOOSTER RING which has smaller tune variations compared with MAIN RING. We report the tune measurements and calculations based on 3-d magnetic field calculations about these two types of ring and discuss the scaling conditions in FFAG accelerators.
FFAG* : FFAG stands for fixed filed alternating gradient. It describes one the focusing scheme in the circular accelerator. 		 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-THPAK034  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)